Datasheet

DATA SHEET
LOW OHMIC CHIP RESISTORS
RL series
5%, 2%, 1%
sizes 0402/0603/0805/1206/
1210/1218/2010/2512
Product specification – June 02, 2015 V.1
RoHS compliant & Halogen Free
Product specification
Chip Resistor Surface Mount
SCOPE
This specification describes
RL0402 to RL2512 low ohmic chip
resistors with lead-free terminations
made by thick film process.
RL
2
9
0402 to 2512
SERIES
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
GLOBAL PART NUMBER (PREFERRED )
APPLICATIONS
 Converters

Printer equipment

Server board

Telecom

Consumer

Car electronics
FEATURES
 AEC-Q200 compliant
RL XXXX X X X XX XXXX L
(1)
(2) (3) (4)
(5)
(6)
(7)
(1) SIZE
0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512
(2) TOLERANCE
F = ±1%
G = ±2%
J = ±5%
"-" = Jumper ordering
(3) PACKAGING TYPE

Halogen Free Epoxy

RoHS compliant

Hazardous wastes

High component and
equipment reliability

Saving of PCB space

Non-forbidden materials used
in products/production
07 = 7 inch dia. Reel and standard power

Low resistances applied to
current sensing
7W = 7 inch dia. Reel and 2 x standard power (0805 and 1206)

MSL Class: MSL 1
R = Paper taping reel
K = Embossed taping reel
(4) TEMPERATURE COEFFICIENT OF RESISTANCE
– = Based on spec
(5) TAPING REEL
13 = 13 inch dia. Reel and standard power
(6) RESISTANCE VALUE
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point.
Detailed coding rules of resistance are shown in the table of “Resistance rule of
global part number”.
(7) DEFAULT CODE
Letter L is system default code for order only
Resistance rule of global part
number
Resistance code rule
Example
0RXXX
(1 to 976 mΩ)
XRXX
(1 to 9.76 Ω)
0R1 = 0.1 Ω
0R12 = 0.12 Ω
0R105 = 0.105 Ω
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XXRX
(10 to 97.6 Ω)
10R = 10 Ω
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
(1 to 9.76 MΩ)
1M = 1,000,000 Ω
9M76= 9,760,000 Ω
(Note)
O RDERING EXAMPLE
The ordering code of a RL0603
chip resistor, value 0.56Ω with
± 1% tolerance, supplied in 7-inch
tape reel is: RL0603FR-070R56L.
NOTE
1. All our R-Chip products meet RoHS
compliant and Halogen Free. "LFP" of
the internal 2D reel label mentions
"Lead Free Process"
2. On customized label, "LFP" or
specific symbol can be printed
www.yageo.com
Jun. 02, 2015 V.1
Product specification
Chip Resistor Surface Mount
RL
SERIES
3
9
0402 to 2512
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
GLOBAL PART NUMBER (PREFERRED )
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2350 / 2390 / 2322
(1)
SIZE TYPE
Last digit of 12NC
XXX XXXXX L
(2)
(3)
(4)
START TOL. RESISTANCE
IN (1) (%) RANGE
Resistance decade (3)
EMBOSSED (2) PAPER/PE (2)
TAPE ON REEL TAPE ON REEL (units)
4,000
5,000
10,000
0402 LRC31
2350
±5% 0.05 to 1 Ω
-
-
513 20xxx
LRC32
2350
±1% 0.05 to 1 Ω
-
-
513 22xxx
0603 LRC21
2350
±5% 0.01 to 1 Ω
-
512 10xxx
-
LRC22
2350
±1% 0.01 to 1 Ω
-
512 12xxx
-
0805 LRC11
2350
±5% 0.01 to 1 Ω
-
511 10xxx
-
LRC12
2350
±1% 0.01 to 1 Ω
-
511 12xxx
-
LRC11P 2350
±1% 0.01 to 1 Ω
-
511 15xxx
-
LRC12P 2350
±5% 0.01 to 1 Ω
-
511 17xxx
-
Last digit
0.01 to 0.0976Ω
0
0.1 to 0.976Ω
7
1 to 9.76Ω
8
10 to 97.6Ω
9
100 to 976Ω
1
1 to 9.76 kΩ
2
10 to 97.6 kΩ
3
100 to 976 kΩ
4
1 to 9.76 MΩ
5
10 to 97.6 MΩ
6
Example:
0.02Ω
=
0200 or 200
0.3Ω
=
3007 or 307
1Ω
=
1008 or 108
33 kΩ
=
3303 or 333
10 MΩ
=
1006 or 106
1206 LRC01
2350
±5% 0.01 to 1 Ω
-
510 10xxx
-
LRC02
2350
±1% 0.01 to 1 Ω
-
510 12xxx
-
LRC01P 2350
±1% 0.01 to 1 Ω
-
519 01xxx
-
LRC02P 2350
±5% 0.01 to 1 Ω
-
519 1xxxx
-
±5% 0.01 to 0.0976 Ω -
735 90xxx
-
LPRC101 2390
±5% 0.1 to 1 Ω
-
735 60xxx
-
O RDERING EXAMPLE
LPRC102 2390
±1% 0.01 to 1 Ω
-
735 3xxxx
-
The ordering code of a RL0603 chip
1218 LPRC201 2322
±5% 0.01 to 1 Ω
735 64xxx
-
-
LPRC201 2322
±1% 0.01 to 1 Ω
735 7xxxx
-
-
±5% 0.01 to 0.0976 Ω 760 90xxx
-
-
LPRC111 2322
±5% 0.1 to 1 Ω
760 60xxx
-
-
resistor, value 0.56 Ω with ±1%
tolerance, supplied in tape of 5,000
units per reel is: 235051212567L or
RL0603FR-070R56L.
LPRC111 2322
±1% 0.01 to 0.0976 Ω 761 90xxx
-
-
NOTE
LPRC111 2322
±1% 0.1 to 1 Ω
761 6xxxx
-
-
±5% 0.01 to 0.0976 Ω 762 90xxx
-
-
LPRC221 2322
±5% 0.1 to 1 Ω
762 60xxx
-
-
1. All our R-Chip products meet RoHS
compliant and Halogen Free. "LFP" of
the internal 2D reel label mentions
"Lead Free Process"
LPRC221 2322
±1% 0.01 to 0.0976 Ω 763 90xxx
-
-
LPRC221 2322
±1% 0.1 to 1 Ω
-
-
1210 LPRC101 2390
2010 LPRC111 2322
2512 LPRC221 2322
763 6xxxx
2. On customized label, "LFP" or specific
symbol can be printed
(1) The resistors have a 12-digit ordering code starting with 2350/2390/2322.
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (In
12NC code, only 07'' tape reel code is supplied. Supply of 10''/13'' tape reel is
requested in Global part number ordering code.)
(3) The remaining 4 or 3 digits represent the resistance value with the last digit
indicating the multiplier as shown in the table of “Last digit of 12NC”.
(4) Letter L is system default code for order only
(Note)
.
www.yageo.com
Jun. 02, 2015 V.1
Product specification
Chip Resistor Surface Mount
RL
SERIES
0402 to 2512
4
9
MARKING
RL0402 / RL0603: R<100 mΩ EXCEPT 10/20/30/40/50/60 mΩ
No marking
Fig. 1
RL0603: R≥100 mΩ, R = 10/20/30/40/50/60 mΩ
E-24 series / Non-E series (R= 25/40/50/60/250/400/500 mΩ):3 digits
The “R” is used as a decimal point; the other 2 digits are significant.
Fig. 2 Value = 22 mΩ
RL0805 / RL1206 / RL1210 /RL1218 / RL2010 / RL2512
E-24 series / Non-E series (R= 25/40/50/60/250/400/500 mΩ): 4 digits
Fig. 3
The “R” is used as a decimal point; the other 3 digits are significant.
Value = 20 mΩ
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistors are constructed out of a high-grade ceramic
body. Internal metal electrodes are added at each end and
connected by a resistive paste. The composition of the
paste is adjusted to give the approximate required
resistance and laser cutting of this resistive layer that
achieves tolerance trims the value. The resistive layer is
covered with a protective coat and printed with the
resistance value. Finally, the two external terminations
(matte tin) are added. See fig. 4.
OUTLINES
For dimension see Table 1
DIMENSIONS
Table 1 For outlines see fig. 4
TYPE
L (mm) W (mm)
H (mm)
I1 (mm)
I2 (mm)
RL0402 1.00 ±0.10 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10
RL0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
RL0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
RL1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
RL1210 3.10 ±0.10 2.60 ±0.15 0.55 ±0.10 0.50 ±0.20 0.50 ±0.20
Fig. 4 Chip resistor outlines
RL1218 3.05 ±0.15 4.60 ±0.20 0.55 ±0.10 0.45 ±0.25 0.50 ±0.25
RL2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
RL2512 6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
www.yageo.com
Jun. 02, 2015 V.1
Product specification
Chip Resistor Surface Mount
RL
5
9
0402 to 2512
SERIES
ELECTRICAL CHARACTERISTICS
Table 2
Type
Power
P70
RL0402
1/16W
50mΩ ≤ R < 1Ω
RL0603
1/10W
10mΩ ≤ R < 1Ω
RL0805
RL1206
Operating Temp.
range
1/8W
Jumper criteria
Max. resistance
Rated current
Max. resistance
Rated current
Max. resistance
Rated current
10mΩ ≤ R < 1Ω
10mΩ ≤ R < 1Ω
1/4W
1/4W
1/2W
T. C. R.
( ppm/°C)
Resistance range & tolerance
-55°C to +125°C
E24 ±1%, ±2%, ±5%
--
10mΩ ≤ R < 1Ω
See following table
“T.C.R.- RL series”
10mΩ ≤ R < 1Ω
20mΩ
1.5A
20mΩ
2A
20mΩ
2.5A
--
Max. resistance 20mΩ
Rated current 3.5A
--
--
RL1210
1/2W
10mΩ ≤ R < 1Ω
--
--
RL1218
1W
10mΩ ≤ R < 1Ω
--
--
RL2010
3/4W
10mΩ ≤ R < 1Ω
--
--
RL2512
1W
10mΩ ≤ R < 1Ω
--
--
TYPE / RESISTANCE
RANGE
RL0402 50mΩ≤R<1Ω
RL0603 10mΩ≤R<1Ω
TEMPERATURE COEFFICIENT
OF RESISTANCE
50mΩ ≤R<100mΩ
100mΩ ≤R<500mΩ
500mΩ ≤R<1Ω
±1000 ppm/°C
±800 ppm/°C
±300 ppm/°C
10mΩ ≤R≤36mΩ
36mΩ <R≤91mΩ
91mΩ <R≤500mΩ
500mΩ <R<1Ω
±1,500 ppm/°C
±1,200 ppm/°C
±800 ppm/°C
±300 ppm/°C
10mΩ ≤R≤18mΩ
18mΩ <R≤47mΩ
47mΩ <R≤91mΩ
±1,500 ppm/°C
±1,200 ppm/°C
±1,000 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
±1,500 ppm/°C
±1,200 ppm/°C
±1,000 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
±1,500 ppm/°C
±1,000 ppm/°C
±800 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
RL2010
±1,500 ppm/°C
±1,200 ppm/°C
±1,000 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
RL2512
±1,500 ppm/°C
±1,200 ppm/°C
±800 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
RL0805
RL1206
RL1210
10mΩ≤R<1Ω
RL1218 10mΩ≤R<1Ω
91mΩ <R≤360mΩ 360mΩ <R≤500mΩ
10mΩ ≤R≤30mΩ
30mΩ <R≤56mΩ
56mΩ <R≤180mΩ
180mΩ <R<1Ω
±2,000 ppm/°C
±1,000 ppm/°C
±700 ppm/°C
±250 ppm/°C
500mΩ <R<1Ω
FOOTPRINT AND SOLDERING PROFILES
For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PACKING STYLE
Paper taping reel (R)
Embossed taping reel (K)
REEL DIMENSION
RL0402
RL0603
RL0805
RL1206
RL1210
RL1218
RL2010
RL2512
7" (178 mm)
10,000
5,000
5,000
5,000
5,000
---
---
---
13" (330 mm)
50,000
20,000
20,000
20,000
20,000
---
---
---
7" (178 mm)
---
---
---
---
---
4,000
4,000
4,000
NOTE
1. For paper/embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”.
www.yageo.com
Jun. 02, 2015 V.1
Product specification
Chip Resistor Surface Mount
RL
SERIES
0402 to 2512
6
9
FUNCTIONAL DESCRIPTION
OPERATINGTEMPERATURE RANGE
Normal Power: Range: –55 °C to +155 °C (Fig. 5)
Double Power: Range: –55 °C to +125 °C (Fig. 6)
POWER RATING
Each type rated power at 70 °C:
RL0402=1/16 W;
RL0603=1/10 W;
RL0805=1/8 W, 1/4W;
RL1206=1/4 W, 1/2W;
RL1210=1/2 W;
RL1218=1 W;
RL2010=3/4 W;
RL2512=1 W.
Fig. 5 Maximum dissipation (P max) in percentage of rated power
as a function of the operating ambient temperature
(Tamb)
R ATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=
(PxR)
Where
V = Continuous rated DC or AC (rms) working
voltage (V)
P = Rated power (W)
R = Resistance value (Ω )
Fig. 6 Maximum dissipation (P max) in percentage of rated power
as a function of the operating ambient temperature
(Tamb )
www.yageo.com
Jun. 02, 2015 V.1
Product specification
Chip Resistor Surface Mount
RL
SERIES
7
9
0402 to 2512
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
Life/
Endurance
IEC 60115-1 4.25.1
High Temperature
Exposure
IEC 60068-2-2
MIL-STD-202 Method 108A
REQUIREMENTS
1,000 hours at 70±2°C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±(2% +0.5mΩ )
1,000 hours at maximum operating
temperature depending on specification,
unpowered
±(1% +0.5mΩ )
No direct impingement of forced air to the
parts
Normal power : Tolerances: 155±5℃
Double power : Tolerances: 125±5℃
Moisture Resistance
MIL-STD-202 Method 106G
Each temperature / humidity cycle is defined
at 8 hours, 3 cycles / 24 hours for 10d with
25 °C / 65 °C 95% R.H, without steps 7a &
7b, unpowered
±(2% +0.5mΩ )
Parts mounted on test-boards, without
condensation on parts
Thermal Shock
MIL-STD-202 Method 107G
-55/+125 °C
±(1% +0.5mΩ )
Number of cycles required is 300.
Devices mounted
Maximum transfer time is 20 seconds. Dwell
time is 15 minutes.
Short time overload
IEC60115-1 4.13
RL standard power: 2.5 times rated voltage
for 5 sec at room temperature
±(2% +0.5mΩ )
No visible damage
RL high power: 5 times rated power for 5 sec
at room temperature
Board Flex/
Bending
IEC 60115-1 4.33
Device mounted on PCB test board as
described, only 1 board bending required
±(1% +0.5mΩ )
No visible damage
3 mm bending
Bending time: 60±5 seconds
Ohmic value checked during bending
www.yageo.com
Jun. 02, 2015 V.1
Product specification
Chip Resistor Surface Mount
RL
SERIES
8
9
0402 to 2512
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
J-STD-002 test B
Electrical Test not required
Well tinned (≥95% covered)
No visible damage
Magnification 50X
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
- Leaching
J-STD-002 test D
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
- Resistance to
Soldering Heat
IEC 60115-1 4.18
Condition B, no pre-heat of samples.
±(1% +0.5mΩ )
Leadfree solder, 260 °C, 10 seconds
immersion time
No visible damage
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
www.yageo.com
Jun. 02, 2015 V.1
Product specification
Chip Resistor Surface Mount
RL
SERIES
0402 to 2512
9
9
REVISION HISTORY
REVISION
DATE
CHANGE NOTIFICATION
DESCRIPTION
Version 0
Jun. 02, 2015
-
- Update tests and requirements
Version 0
Nov. 11, 2014 -
- First issue of this specification
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Jun. 02, 2015 V.1