DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Soft termination Class 2, X7R 16 V TO 630V 100 pF to 470 NF Product Specification – August 4, 2015 V.9 RoHS compliant & Halogen Free Product specification Surface-Mount Ceramic Multilayer Capacitors SCOPE This specification describes X7R series chip capacitors with Flexible leadfree terminations. Soft Termination X7R 16 V to 630 V 2 14 ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP CTC & 12NC All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. YAGEO / PHYCOMP BRAND ordering code APPLICATIONS High flexure stress circuit boards Switch power supplies Telecom base station GLOBAL PART NUMBER (PREFERRED ) CS XXXX X X (1) X7R (2) (3) X BB XXX (4) (5) (1) SIZE – INCH BASED (METRIC) FEATURES Supplied in tape on reel Flexible termination system Leaded-free termination meet RoHS requirements Improved resistance to thermal stresses Increased mechanical performance 0603 (1608) 0805 (2012) 1206 (3216) (2) TOLERANCE J = ±5% (1) K = ±10% M = ±20% (3) PACKING STYLE R = Paper/PE taping reel; Reel 7 inch K = Blister taping reel; Reel 7 inch P = Paper/PE taping reel; Reel 13 inch F = Blister taping reel; Reel 13 inch (4) RATED VOLTAGE 7 = 16 V 8 = 25 V 9 = 50 V 0 = 100 V A = 200 V Y = 250 V B = 500 V Z = 630 V C = 1 kV (5) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 103 = 10 x 103 = 10,000 pF = 10 nF NOTE 1. Tolerance ±5% doesn't available for full product range, please contact local sales force before order www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors Soft Termination X7R 3 14 16 V to 630 V CONSTRUCTION The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end flexible terminations and finally covered with a layer of plated tin (NiSn). The terminations are lead-free. A cross section of the structure is shown in Fig.1 and Fig.2. terminations Copper Soft electrode (Stress relaxation) Ni Plating electrodes Sn Plating YNM0049 Fig. 2 Concept of soft termination MLB457 ceramic material OUTLINES Fig. 1 Surface mounted multilayer ceramic capacitor construction For dimension see Table 1 DIMENSION Table 1 For outlines see fig. 3 TYPE L1 (mm) W (mm) 0603 1.6 ±0.20 0.8 ±0.15 0805 2.0 ±0.30 1.25 ±0.20 1206 3.2 ±0.40 1.6 ±0.20 T (MM) Refer to table 2 to 3 L2 / L3 (mm) L4 (mm) min. max. min. 0.20 0.65 0.30 0.25 0.75 0.55 0.25 0.85 1.40 Fig. 3 Surface mounted multilayer ceramic capacitor dimension www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors Soft Termination X7R 16 V to 630 V 4 14 CAPACITANCE RANGE & THICKNESS Table 2 Size from 0603 0603 CAP. 16V 25V 50V 100V 100 pF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 150 pF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 220 pF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 330 pF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 470 pF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 680 pF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 1.0 nF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 1.5 nF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 2.2 nF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 3.3 nF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 4.7 nF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 6.8 nF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 10 nF 0.8±0.15 0.8±0.15 0.8±0.15 0.8±0.15 15 nF 0.8±0.15 0.8±0.15 0.8±0.15 22 nF 0.8±0.15 0.8±0.15 0.8±0.15 27 nF 0.8±0.15 0.8±0.15 0.8±0.15 33 nF 0.8±0.15 0.8±0.15 0.8±0.15 47 nF 0.8±0.15 0.8±0.15 0.8±0.15 68 nF 0.8±0.15 0.8±0.15 0.8±0.15 100 nF 0.8±0.15 0.8±0.15 0.8±0.15 150 nF 0.8±0.15 0.8±0.15 0.8±0.15 220 nF 0.8±0.15 0.8±0.15 0.8±0.15 470 nF 0.8±0.15 1 uF NOTE 1. Values in shaded cells indicate thickness class in mm 2. For product with 5% tolerance, please contact local sales force before order www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors Soft Termination X7R 16 V to 630 V 5 14 CAPACITANCE RANGE & THICKNESS Table 3 Size 0805 CAP. 0805 16V 25V 50V 100V 200V / 250V 180 pF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 0.85±0.15 220 pF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 0.85±0.15 330 pF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 0.85±0.15 390 pF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 0.85±0.15 470 pF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 0.85±0.15 680 pF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 0.85±0.15 1.0 nF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 0.85±0.15 1.5 nF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 0.85±0.15 2.2 nF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 0.85±0.15 3.3 nF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 0.85±0.15 4.7 nF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 0.85±0.15 6.8 nF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 1.25±0.2 10 nF 0.60±0.15 0.60±0.15 0.6±0.15 0.6±0.15 1.25±0.2 15 nF 0.60±0.15 0.60±0.15 0.6±0.15 0.85±0.15 1.25±0.2 18 nF 0.60±0.15 0.60±0.15 0.6±0.15 0.85±0.15 1.25±0.2 22 nF 0.60±0.15 0.60±0.15 0.6±0.15 0.85±0.15 1.25±0.2 27 nF 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 33 nF 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 47 nF 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 68 nF 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 100 nF 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 150 nF 1.25±0.2 1.25±0.2 1.25±0.2 220 nF 1.25±0.2 1.25±0.2 1.25±0.2 270 nF 1.25±0.2 1.25±0.2 1.25±0.2 330 nF 1.25±0.2 1.25±0.2 1.25±0.2 390 nF 1.25±0.2 1.25±0.2 1.25±0.2 470 nF 1.25±0.2 1.25±0.2 1.25±0.2 680 nF 1.25±0.2 1.25±0.2 1000 nF 1.25±0.2 1.25±0.2 100 pF 150 pF NOTE 1. Values in shaded cells indicate thickness class in mm 2. For product with 5% tolerance, please contact local sales force before order www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors Soft Termination X7R 16 V to 630 V 6 14 CAPACITANCE RANGE & THICKNESS Table 4 Size 1206 1206 CAP. 16V 25V 50V 100V 200V / 250V 500V / 630V 220 pF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 330 pF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 390 pF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 470 pF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 680 pF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 1.0 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 1.5 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 2.2 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 3.3 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 4.7 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 6.8 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 10 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 15 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 18 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 22 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 27 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 33 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 47 nF 0.85±0.15 0.85±0.15 0.85±0.15 0.85±0.15 68 nF 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 100 nF 0.85±0.15 0.85±0.15 0.85±0.15 1.25±0.2 150 nF 0.85±0.15 0.85±0.15 1.15±0.2 220 nF 0.85±0.15 0.85±0.15 1.15±0.2 100 pF 150 pF 180 pF 270 nF 330 nF 390 nF 470 nF 680 nF 1000 nF NOTE 1. Values in shaded cells indicate thickness class in mm 2. For product with 5% tolerance, please contact local sales force before order www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors Soft Termination X7R 7 14 16 V to 630 V THICKNESS CLASSES AND PACKING QUANTITY Table 5 SIZE CODE Ø 180 MM / 7 INCH Paper Blister Ø 330 MM / 13 INCH Paper Blister THICKNESS CLASSIFICATION TAPE WIDTH QUANTITY PER REEL 0.8 ±0.15 mm 8 mm 4,000 --- 15,000 --- 15,000 0603 0805 1206 QUANTITY PER BULK CASE 0.6 ±0.15 mm 8 mm 4,000 --- 20,000 --- 10,000 0.85 ±0.15 mm 8 mm 4,000 --- 15,000 --- 8,000 0.85 ±0.15 mm 8 mm 4,000 --- 15,000 --- --- 1.15 ±0.2 mm 8 mm --- 3,000 --- 10,000 --- 1.25 ±0.2 mm 8 mm --- 3,000 --- 10,000 --- ELECTRICAL CHARACTERISTICS X7R DIELECTRIC CAPACITORS; NISN TERMINATIONS Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions for testing as given in 5.3 of IEC 60068-1: - Temperature: 15 °C to 35 °C Relative humidity: 25% to 75% Air pressure: 86 kPa to 106 kPa Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time sufficient to allow the entire capacitor to reach this temperature. The period as prescribed for recovery at the end of a test is normally sufficient for this purpose. Table 6 VALUE DESCRIPTION Capacitance range 100 pF to 1000 nF Capacitance tolerance ±5%, ±10%, ±20% Dissipation factor (D.F.) 16 V ≤ 3.5% 25 V ≤ 2.5% Exception: 0603 ≥ 47 nF ≤ 3.5% ≥ 50 V Insulation resistance after 1 minute at Ur (DC) ≤ 2.5% Rins ≥ 10 GΩ or Rins × Cr ≥ 500 seconds whichever is less Maximum capacitance change as a function of temperature (temperature characteristic/coefficient): Operating temperature range: ±15% –55 °C to +125 °C NOTE Capacitance tolerance ±5% doesn't available for full product range, please contact local sales force before order www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors Fig. 4 Soft Termination X7R 16 V to 630 V 8 14 Typical capacitance change as a function of temperature SOLDERING RECOMMENDATION Table 7 SOLDERING METHOD SIZE 0603 0805 1206 ≥ 1210 Reflow ≥ 1.0 µF ≥ 2.2 µF ≥ 4.7 µF Reflow only Reflow/Wave < 1.0 µF < 2.2 µF < 4.7 µF --- www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors Soft Termination X7R 16 V to 630 V 9 14 TESTS AND REQUIREMENTS Table 8 Test procedures and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC 6038421/22 4.3 The capacitors may be mounted on printed-circuit boards or ceramic substrates No visible damage Visual Inspection and Dimension Check 4.4 Any applicable method using × 10 magnification In accordance with specification Capacitance (1) 4.5.1 Class 2: At 20 °C, 24 hrs after annealing Within specified tolerance f = 1 KHz for C ≤ 10 μ F, measuring at voltage 1 Vrms at 20 °C f = 120 Hz for C > 10 μ F, measuring at voltage 0.5 Vrms at 20 °C Dissipation Factor (D.F.) (1) 4.5.2 Class 2: At 20 °C, 24 hrs after annealing In accordance with specification f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at voltage 1 Vrms at 20 °C f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at voltage 0.5 Vrms at 20 °C f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C Insulation Resistance 4.5.3 Ur ≤ 500 V: At Ur for 1 minute Ur > 500 V: At 500 V for 1 minute In accordance with specification www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors Soft Termination X7R 16 V to 630 V TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature Characteristic IEC 6038421/22 Capacitance shall be measured by the steps shown in the following table. <General purpose series> Class1: C/C: ±30ppm 4.6 The capacitance change should be measured after 5 min at each specified temperature stage. Step Temperature(℃) a 25±2 b Lower temperature±3℃ c 25±2 d Upper Temperature±2℃ e 25±2 10 14 Class2: X7R: C/C: ±15% Y5V: C/C: 22~-82% <High Capacitance series> Class2: X7R/X5R: C/C: ±15% Y5V: C/C: 22~-82% (1) Class I Temperature Coefficient shall be calculated from the formula as below Temp, Coefficient = C2-C1 C1 x106 [ppm/℃] C1: Capacitance at step c C2: Capacitance at 125℃ T: 100℃(=125℃-25℃) (2) Class II Capacitance Change shall be calculated from the formula as below C= C2-C1 C1 x 100% C1: Capacitance at step c C2: Capacitance at step b or d Adhesion 4.7 A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate Force size ≥ 0603: 5N size = 0402: 2.5N size = 0201: 1N www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors TEST TEST METHOD Bond Strength 4.8 of Plating on End Face Soft Termination REQUIREMENTS TEST Mounting in accordance with IEC 60384-22 paragraph 4.3 No visible damage Conditions: bending 3 mm at a rate of 1 mm/s, radius jig 5 mm 14 16 V to 630 V X7R 11 C/C Class2: X7R: ±12.5% Test Substrate: Dimension(mm) unit: mm Resistance to Soldering Heat 4.9 Precondition: 150 +0/–10 °C for 1 hour, then keep for 24 ±1 hours at room temperature Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 minute Preheating: for size >1206: 100 °C to 120 °C for 1 minute and 170 °C to 200 °C for 1 minute Solder bath temperature: 260 ±5 °C Dipping time: 10 ±0.5 seconds Recovery time: 24 ±2 hours Type a b c 0201 0.3 0.9 0.3 0402 0.4 1.5 0.5 0603 1.0 3.0 1.2 0805 1.2 4.0 1.65 1206 2.2 5.0 1.65 1210 2.2 5.0 2.0 1808 3.5 7.0 3.7 Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned <General purpose series> C/C Class2: X7R: ±10% <High Capacitance series> C/C Class2: X7R: ±10% D.F. within initial specified value Rins within initial specified value Solderability IEC 6038421/22 4.10 Preheated the temperature of 80 °C to 140 °C and maintained for 30 seconds to 60 seconds. The solder should cover over 95% of the critical area of each termination Test conditions for lead containing solder alloy Temperature: 235 ±5 °C Dipping time: 2 ±0.2 seconds Depth of immersion: 10 mm Alloy Composition: 60/40 Sn/Pb Number of immersions: 1 Test conditions for leadfree containing solder alloy Temperature: 245 ±5 °C Dipping time: 3 ±0.3 seconds Depth of immersion: 10 mm Alloy Composition: SAC305 Number of immersions: 1 www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors TEST Rapid Change of Temperature TEST METHOD 4.11 Soft Termination X7R PROCEDURE REQUIREMENTS Preconditioning; 150 +0/–10 °C for 1 hour, then keep for 24 ±1 hours at room temperature No visual damage 5 cycles with following detail: 30 minutes at lower category temperature 30 minutes at upper category temperature Class2: X7R: ±15% Recovery time 24 ±2 hours 16 V to 630 V 12 14 <General purpose series> C/C <High Capacitance series> C/C Class2: X7R: ±15% D.F. meet initial specified value Rins meet initial specified value Damp Heat with Ur Load IEC 6038421/22 4.13 1. Preconditioning, class 2 only: 150 +0/-10 °C /1 hour, then keep for 24 ±1 hour at room temp 2. Initial measure: Spec: refer initial spec C, D, IR 3. Damp heat test: 500 ±12 hours at 40 ±2 °C; 90 to 95% R.H. 1.0 Ur applied 4. Recovery: Class 2: 24 ±2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be precondition according to “IEC 60384 4.1” and then the requirement shall be met. No visual damage after recovery <General purpose series> C/C Class2: X7R: ±15% D.F. Class2: X7R: ≤ 16V: ≤ 7% ≥ 25V: ≤ 5% Rins Class2: X7R: ≥ 500 MΩ or Rins x Cr ≥ 25s whichever is less <High Capacitance series> C/C Class2: X7R: ±20% D.F. Class2: X7R: 2 x initial value max Rins Class2: X7R: 500 MΩ or Rins x Cr ≥ 25s whichever is less www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors TEST Endurance Soft Termination 16 V to 630 V TEST METHOD PROCEDURE REQUIREMENTS IEC 6038421/22 1. Preconditioning, class 2 only: 150 +0/-10 °C /1 hour, then keep for 24 ±1 hour at room temp No visual damage 2. Initial measure: Spec: refer initial spec C, D, IR Class2: X7R: ±15% 3. Endurance test: Temperature: X7R: 125 °C Specified stress voltage applied for 1,000 hours: Applied 2.0 x Ur for general product. D.F. 4.14 4. Recovery time: 24 ±2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be precondition according to “IEC 60384 4.1” and then the requirement shall be met. Voltage Proof X7R IEC 603841 4.6 Specified stress voltage applied for 1~5 seconds 13 14 C/C Class2: X7R: ≤ 16V: ≤ 7% ≥ 25V: ≤ 5% Rins Class2: X7R: ≥ 1,000 MΩ or Rins x Cr ≥ 50s whichever is less No breakdown or flashover Ur ≤ 100 V: series applied 2.5 Ur 100 V < Ur ≤ 200 V series applied (1.5 Ur + 100) 200 V < Ur ≤ 500 V series applied (1.3 Ur + 100) Ur > 500 V: 1.3 Ur Ur ≧ 1000 V: 1.2 Ur Charge/Discharge current is less than 50 mA www.yageo.com Aug. 4, 2015 V.9 Product specification Surface-Mount Ceramic Multilayer Capacitors Soft Termination X7R 16 V to 630 V 14 14 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 9 Aug.. 04, 2015 - - Capacitance range & thickness Version 8 Jun. 04, 2015 - - Capacitance range & thickness Version 7 Dec. 01, 2014 - - Capacitance range & thickness Version 6 Mar. 27, 2014 - - Capacitance range & thickness Version 5 Mar. 12, 2014 - - Modify Capacitance range & thickness Version 4 Sep. 30, 2013 - - Modify Capacitance range & thickness Version 3 Nov 26, 2012 - - Modify coding rule - thickness updated Version 2 Sep 05, 2011 - - Modify coding rule - thickness updated Version 1 Jun 10, 2011 - - Modify bending level Version 0 Mar 31, 2011 - - New datasheet for soft termination X7R series with RoHS compliant www.yageo.com Aug. 4, 2015 V.9