www.yageo.com Electronic Components for Automotive Applications Introduction As the leader of global passive component service provider, Yageo is pleased to bring you this brochure to offer you a full range of products to fulfill your automotive application requirements. Which includes the thick film automotive grade chip resistors, automotive grade MLCCs, Antennas and other related products. Ferrite products from our affiliate company Ferroxcube can also be used in hybrid and electronic vehicles. Both automotive grade R-Chip and MLCC AC series conform to automotive electronics industry requirements – AEC-Q200 compliant, and is mainly applicable to infotainment , comfort & security; automotive grade R-Chip can also be applied in power management. The AC series R-Chip is based on Yageo’s wellestablished thick film mass production expertise, with the existing manufacturing process further refined. It is optimized, to conform to the strict automotive industry standard, while offering the defined tolerance of 5%, 1% and 0.5% , TCR of ±100, ±200ppm/°C. These high standard characteristics allow Yageo’s AC series to be applied to the majority of automotive electronics systems. Other than the AEC-Q200 standard, the AC 2 series also boasts sulfur resistant and performs 100% automatic optical inspection (AOI), thus provides an even more comprehensive quality guarantee. Yageo’s automotive grade series surface mount capacitors in NPO/X7R dielectric are suited for a variety of applications requiring reliable operation. The devices emphasize the vital and robust nature of capacitors required for mission critical automotive circuits. Stricter testing protocol and inspection criteria have been established for automotive grade products in recognition of potentially harsh environmental conditions. NPO/X7R dielectric features a 125°C maximum operating temperature and is considered “stable”. The Electronics Components, Assemblies & Materials Association (ECA) characterizes NPO dielectric as a Class I material, Components of this classification are temperature compensating and are suited for resonant circuit applications or those where D.F. (Q value) and stability of capacitance characteristics are required. NPO exhibits no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance with reference to ambient temperature. Capacitance change is limited to ±30ppm/°C from -55°C to +125°C. Applications Electronic Components for Automotive Applications Infotainment Audio / Video GPS / Navigation ETC Vehicle Information & Communication System (VICS) Introduction / Applications Comfort & Security Heating, Ventilating & Air Conditioning (HVAC) Body Control Module (BCM) Tyre Pressure Monitoring System (TPMS) Anti-Theft Device Keyless Entry System Power Management Battery Management System (BMS) Battery Charger DC/DC Converter Power Line Communication (PLC) 3 Applications Anti-Theft Device 1 2 Remote Keyless Entry System (RKES) R-Chip AC0402 AC0603 AC0805 AC1206 R-Chip AC0402 AC1206 MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC1812 AC0508 ( Array ) AC0612 ( Array ) MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC1812 AC0508 ( Array ) AC0612 ( Array ) AC0603 Body Control Module (BCM) R-Chip AC0402 AC0603 AC0805 AC1206 RV series SR series PT series AC0805 MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC0508 ( Array ) AC0612 ( Array ) Wireless Components Short Range Antenna Tyre Pressure 4 Monitoring System (TPMS) R-Chip AC0402 AC0603 AC0805 AC1206 AC1210 AC2010 AC2512 PA series PT series RL series MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC1812 AC0508 ( Array ) AC0612 ( Array ) Wiper 3 Ferrites EP Cores, Toroids 5 R-Chip AC0402 AC0603 AC0805 AC1206 1 9 2 MLCC AC0402 AC0603 AC0805 AC1206 AC1210 7 5 Ferrites EFD, ETD Cores Wireless Components Short Range Antenna 4 Heating, 6 Ventilating & Air Conditioning (HVAC) R-Chip AC0402 AC0603 AC0805 AC1206 AC1210 AC2010 AC2512 PA series PE series MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC0508 ( Array ) AC0612 ( Array ) 4 Audio / Video R-Chip AC0402 AC0603 AC0805 AC1206 MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC0508 ( Array ) AC0612 ( Array ) Wireless Components Bluetooth/WiFi Antenna 7 6 R-Chip AC0805 AC1206 AC1210 AC2010 AC2512 RV series SR series Ferrites Toroids R-Chip AC0402 AC0603 AC0805 AC1206 9 6 8 10 MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC0508 ( Array ) AC0612 ( Array ) Wireless Components GPS/Glonass Antenna Wireless Components Celluar WWAN Antenna Ferrites EQ, RM Cores 11 R-Chip AC0402 AC0603 AC0805 AC1206 3 11 14 13 12 12 Battery Management System (BMS) R-Chip AC0805 AC1206 AC1210 AC2010 AC2512 RV series SR series MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC0508 ( Array ) AC0612 ( Array ) Battery Charger 10 R-Chip AC0402 AC0603 PT series MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC0508 ( Array ) AC0612 ( Array ) ETC GPS / Navigation Applications MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC0508 ( Array ) AC0612 ( Array ) 9 Vehicle Information & Communication System (VICS) Electronic Components for Automotive Applications 8 Power Line Communication (PLC) MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC1812 AC0508 ( Array ) AC0612 ( Array ) 13 DC/DC Converter 14 R-Chip AC0805 AC1206 AC1210 AC2010 AC2512 RV series SR series R-Chip AC0805 AC1206 AC1210 AC2010 AC2512 RV series SR series MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC1812 AC0508 ( Array ) AC0612 ( Array ) MLCC AC0402 AC0603 AC0805 AC1206 AC1210 AC1812 AC0508 ( Array ) AC0612 ( Array ) Ferrites PQ, PM Cores Ferrites E Cores, Toroids 55 Recommended Products Automotive Grade MLCC: AC series Features • EIA 0402 to 1812 & array 0508 to 0612 case sizes • DC voltage ratings of 6.3V to 630V • Capacitance offerings ranging from 10pF up to 2.2μF • Available capacitance tolerance of ±5%, ±10% and ±20% • Extremely low ESR and ESL • High thermal stability • High ripple current capability • Preferred capacitance solution at line frequencies and into the MHz range • Negligible capacitance change with respect to temperature from -55°C to +125°C • Non-polar device, minimizing installation concerns • 100% pure matte tin-plated termination finish allowing for excellent solderability Automotive Grade Chip Resistors: AC series Features • EIA0402 to 2512 case sizes • Sulfur resistant (ASTM B809-95 Standard) • 100% AOI at screen printing • Stable process control including narrow specification and Cpk monitor • 100% AOI after plating • ESD withstand voltage of max. 2KV • Humidity resistance of 1% (1,000 hours @ +85°C, 85% RH, applied 10% of operating power) • 8,000 hours operational life test Surge Chip Resistors: SR series Features • Excellent performance at pulse loading • High reliability and stability Applications • Circuits requiring high pulse • Ideal for blocking surge voltage in power supplies 6 Electronic Components for Automotive Applications High Voltage Chip Resistors: RV series Features • High maximum working voltage (MWV) • Reliable electrode construction • Compatible with lead containing and lead free soldering processes • Highly stable in auto-placement surface mounting Applications • Suitable for the voltage divider circuit for high voltage load Recommended Products Thick Film Low Ohmic Chip Resistors: RL / PT series Features • Excellent performance at current sensing applications • PT series: excellent T.C.R. and high rated power Applications • Current sensing • Over current protection Current Sensors - low T. C. R. Chip Resistors: PR / PA / PE series Features • Ultra-low resistance down to 0.0005 Ω • Original trimless design significantly improves current detection, making them ideal for large current fast switching circuits • Resistive element composed of a special alloy, resulting in a superior resistance-temperature coefficient • The unique chip structure minimizes thermal stress during temperature cycling, resulting in greater reliability Applications • Ideal for a variety of applications, including current control circuits, over current protect circuits, and battery charge detection 7 Recommended Products GPS/Glonass Antenna Features • Support GPS & GLONASS system • High radiation efficiency • Pin-solder process • Frequency: 1575/1602 MHz Applications • Navigation device • Telematics box • Fleet management Features • Compact Size • High radiation efficiency • Multi-band coverage • Reflow process compatible Applications • Global cellular network devices • Telematics • Cellular broadband access • M2M module Features • Compact size • Omni-directional radiation • Tape & reel automatic mounting • Reflow process compatible Applications • Smart meter • Industrial remote control • ISM band equipment Cellular WWAN Antenna Short Range Antenna 2.4 GHz Bluetooth/WiFi Antenna Features • Compact size • Omni-directional radiation • Tape & reel automatic mounting • Reflow process compatible 8 Applications • 2.4 GHz WiFi device • Bluetooth gadget • ZigBee device • ISM band equipment Electronic Components for Automotive Applications E Cores Features • Materials: 3C90, 3C92, 3C94, 3C95, 3C96, 3C97, 3F35, 3F36 • Available in a wide variety of sizes Applications • Power converters • Small signal applications • EMI suppression Recommended Products Toroids (Ring Cores) Features • Flame retardant in accordance with UL94V-2 • Materials: 3E27, 3E5, 3E6, 3E10, 3E12, 4A11 Applications • EMC chokes for suppressing RF interference PQ Cores Features • Materials: 3C90, 3C92, 3C94, 3C95, 3C96, 3C97, 3F35, 3F36 • Available in a wide variety of sizes Applications • General purpose transformers • Power conversion Custom Shapes Features • Standard materials • Standard manufacturing process • Design in support to optimize cost and reliability 9 Comparison for Automotive Grade vs Commercial Grade Chip Resistors AC Series vs RC Series Item AC series RC series Thick film process with sulfur withstanding contacts Thick film standard process PPAP with AEC-Q200 test report Standard reliability test report AEC-Q200 IEC 60115-8 Process Control a. 100% AOI at screen printing b. 100% AOI after plating c. Enlarge sampling size Standard control Sulfur Resistant Yes No Dedicated Production Machines Yes No Technology Documentation Qualification Criteria Chip Resistors Qualification Tests Qualification Tests 10 AC series RC series Temperature Cycling 1,000 cycles (-55°C to +125°C) Measurement at 24±2 hours after test conclusion 25 cycles (-55°C to +125°C) Measurement at 24±2 hours after test conclusion Biased Humidity 1,000 hours; +85°C/85% R.H.; 10% of operating power Measured at 24±2 hours after test conclusion On request Operational Life 1,000 hours at 125°C, applied de-rated (36%) continuous working voltage in condition of 1.5 hours on and 0.5 hour off 1,000 hours at 70°C, applied RCWV in condition of 1.5 hours on and 0.5 hours off Mechanical Shock MIL-STD-202G Standard Method 213 Condition C On request Vibration 5Gs for 20 minutes. 12 cycles each of 3 orientations Test from 10-2,000 HZ On request Thermal Shock -55/+125 °C Number of cycles required is 300 Maximum transfer time is 20 seconds Dwell time is 15 minutes. Air – Air -55/+125 °C Number of cycles required is 300 Maximum transfer time is 20 seconds Dwell time is 15 minutes. Air – Air ESD HBM 1KV/2KV On request Electronic Components for Automotive Applications MLCC AC Series vs CC Series Item AC series CC series PPAP with AEC-Q200 test report Standard reliability test report Qualification Criteria AEC-Q200 IEC 60384 Process Control 100% AOI Standard control Yes No Documentation Dedicated Production Machine MLCC Qualification Tests AC series CC series High Temperature Exposure Unpowered; 1,000 hours at T = 150°C Temperature Cycling 1,000 cycles (-55°C to +125°C) Measurement at 24±2 hours after test conclusion Thermal Shock Rapid change of temperature test: NP0/X7R: -55 °C to +125 °C; 300 cycles 15 minutes at lower category temperature; 15 minutes at upper category temperature N/A Moisture Resistance T = 24 hrs/per cycle; 10 continuous cycles unpowered N/A Biased Humidity 1,000 hours at 85°C/85% R.H., with Ur Mechanical Shock Three shocks in each direction shall be applied along the three mutually perpendicular axes of the test specimen (18 shocks) N/A Vibration 5 g’s for 20 minutes, 12 cycles each of 3 orientations N/A ESD Solderability (Steam Aging) Board Flex Beam Load (Body Strength) N/A 25 cycles (-55°C to +125°C) Measurement at 24±2 hours after test conclusion 500 hours at 40°C/95% R.H., with Ur Level Confirmed N/A Guaranteed N/A Class 1: 3 mm, Class 2: 2 mm 1 mm ≤ 0805 Thickness > 0.5mm: 20N Thickness ≤ 0.5mm: 8N ≥ 1206 Thickness > 1.25 mm: 54N Thickness ≤ 1.25 mm: 15N Comparison for Automotive Grade vs Commercial Grade Qualification Tests N/A 11 Component Solutions HID Lighting Yageo solution for HID lighting control Resistors AC series: AC0402~AC1206 (1Ω-1MΩ) PT series: PT0402~PT2512 (100mΩ-910mΩ) RL series: RL0603~RL2512 (10mΩ-910mΩ) Capacitors AC series: AC0402~AC1210 (10pF-2.2μF) The main error amplif ier and it s external associated resistors and capacitors will determine where the peak of the power curve occurs as well as the shape of the frequency response of the ballast. 35W DC lamp + C2 R4 C3 1 50V + C3 C2 8 + + + R2 4 VDC + + C3 0 25V + R3 0 C1 35V C4 400V C3 2 R1 R3 C6 250V R2 1 R2 6 R2 2 LAMP + C7 250V R2 (current sensor ) C5 R2 7 R2 5 R20 (current sensor ) Interior Lighting Applications Interior lighting applications include cluster or instrument backlighting, dome or map reading lights, courtesy lights at doors or in the trunk, and display backlighting. Power supply for interior lighting applications IN OUT C1 V5 Yageo solution for interior lighting Resistors PR/PA series: PR1206~PR2512 (1mΩ-100mΩ) PE series: PF0603~PF2512 (1mΩ-100mΩ) Capacitors AC series: AC0402~AC1210 (10pF-2.2μF) 12 REG LEDs C2 Control (IC ) + R1 (current sensor ) PWM DIMMING EN GND CS Electronic Components for Automotive Applications Automotive Protected Circuit Protected circuit The automotive electrical system makes up of large current electromotor, relay, solenoid, lighting and switch. So it is easy to engender the peak signal and noise. R7 (current sensor ) INPUT OUTPUT R5 R1 C1 CL R8 87 Vc c SENSE 1 R2 ON 6 GATE Control (IC ) R9 FB C3 R3 R4 TIME R GN DP WRGD 54 R1 0 2 Component Solutions Yageo solution for automotive protected circuit Resistors AC series: AC0402~AC1206 (1Ω-1MΩ) RL series: RL0603~RL2512 (10mΩ-910mΩ) Capacitors AC series: AC0402~AC1210 (10pF-2.2μF) R6 3 C2 Automotive Current Mode PWM Control Circuit Yageo solution for current mode control circuit Resistors AC series: AC0402~AC1206 (1Ω-1MΩ) PT series: PT0402~PT2512 (100mΩ-910mΩ) PE series: PF0603~PF2512 (1mΩ-100mΩ) Capacitors AC series: AC0402~AC1210 (10pF-2.2μF) • In order to prevent output leakage current from activating the power switch, the output should be shunted to ground with a resistor. • Timing and by p a ss c ap acitor s should be connected to GND pin in a single point ground. PWM control circuit VPR C1 GND C2 C3 R1 R2 C4 C5 C8 C7 Vc c Vcc - GND vc C9 C8 R3 Vc c V RE F C1 0 R5 PVc c V OU T R4 C1 2 SENSE R6 OS C COMP GN DP GN D V F 8 R7 C1 1 R8 C1 4 C1 3 R9 (current sensor ) 13 Product Information - Chip Resistors Electrical characteristics Type Power P70 Operating Temp. range MWV RCOV DWV AC0402 1/16W -55°C to +155°C 50V 100V 100V IRated IMax. 1.0 2.0 AC0603 1/10W -55°C to +155°C 75V 150V 100V IRated IMax. 1.0 2.0 AC0805 1/8W -55°C to +155°C 150V 300V 300V IRated IMax. 2.0 5.0 AC1206 1/4W -55°C to +155°C 200V 400V 500V AC1210 1/2W -55°C to +155°C 200V 500V 500V AC1218 -55°C to +155°C 200V 500V 500V AC2010 3/4W -55°C to +155°C 200V 500V 500V AC2512 500V 500V 1W 1W -55°C to +155°C 200V 1Ω ≤ R ≤ 10MΩ Jumper < 0.05Ω E24 ±5% E24/E96 ±0.5%, ±1% 1Ω ≤ R ≤ 10Ω ±200 10Ω < R ≤ 10MΩ ±100 I1 H I2 L IRated 2.0 IMax. 10.0 IRated 2.0 IMax. 10.0 1Ω ≤ R ≤10MΩ Jumper < 0.05Ω IRated 2.0 IMax. 10.0 unit: mm I1 I2 IRated 2.0 IMax. 10.0 IRated 6.0 IMax. 10.0 1Ω ≤ R ≤ 1MΩ Jumper < 0.05Ω Dimensions 14 Jumper criteria (unit: A) T. C. R. ( ppm/°C) Resistance range & tolerance W Type L W H l1 l2 AC0402 1.00 ±0.05 0.50 ±0.05 0.32 ±0.05 0.20 ±0.10 0.25 ±0.10 AC0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15 AC0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20 AC1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20 AC1210 3.10 ±0.10 2.60 ±0.15 0.50 ±0.10 0.45 ±0.15 0.50 ±0.20 AC1218 3.10 ±0.10 4.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20 AC2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.55 ±0.15 0.50 ±0.20 AC2512 6.35 ±0.10 3.10 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20 unit: mm Electronic Components for Automotive Applications Packing quantities 178mm / Ø7” reel 330mm / Ø13” reel Embossed Paper Paper 10 000 --- 20 000 50 000 8mm 5 000 --- 10 000 20 000 0805 8mm 5 000 --- 10 000 20 000 1206 8mm 5 000 --- 10 000 20 000 1210 8mm 5 000 --- --- 20 000 1218 12mm --- 4 000 --- --- 2010 12mm --- 4 000 --- --- 2512 12mm --- 4 000 --- --- Tape width Paper 0402 8mm 0603 Product Information - Chip Resistors 254mm / Ø10” reel Size code Explanation of ordering code AC 060 3 J R ― 07 100K Series name (code 1-2) AC = Automotive grade chip resistors Size code (code 3-6) (inch / metric) 0402 = 1.0 x 0.5 0603 = 1.6 x 0.8 0805 = 2.0 x 1.25 1206 = 3.2 x 1.6 1210 = 3.2 x 2.6 1218 = 3.2 x 4.5 2010 = 5.0 x 2.5 2512 = 6.35 x 3.2 Tolerance (code 7) L Default code (code 17) Resistance (code 12-16) 0R = Jumper 10R = 10Ω 100R = 100Ω 100K = 100KΩ Taping reel (code 10-11) 07 = 7 inch Dia. reel 10 = 10 inch Dia. reel 13 = 13 inch Dia. reel T. C. R. (code 9) “―” = Based on spec. D = ±0.5% F = ±1% J = ±5% (for jumper ordering) Packing style (code 8 ) R = Paper tape reel K = Embossed plastic tape reel 15 Product Information - MLCC Electrical Characteristics Type AC0402 AC0603 AC0805 AC1206 TC Operating Temp Range Capacitance Range Voltage Range Tolerance NPO -55°C to 125°C 0.47pF~220pF 50 V ±5% X7R -55°C to 125°C 100pF~100nF 10V~50V ±10%, ±20% NPO -55°C to 125°C 0.47pF~680pF 50V~250V ±5% X7R -55°C to 125°C 100pF~220nF 10V~100V ±10%, ±20% NPO -55°C to 125°C 0.47pF~1nF 50V~630V ±5% X7R -55°C to 125°C 150pF~1μF 10V~500V ±10%, ±20% NPO -55°C to 125°C 0.47pF~2.7nF 50V~630V ±5% X7R -55°C to 125°C 220pF~1μF 6.3V~630V ±10%, ±20% NPO -55°C to 125°C 47pF~2.7nF 50V~500V ±5% X7R -55°C to 125°C 2.2nF~1μF 6.3V~500V ±10%, ±20% AC1812 X7R -55°C to 125°C 2.2nF~1μF 50V~100V ±10%, ±20% AC0508 (Array) NPO -55°C to 125°C 10pF~100pF 50 V ±5%, ±10% X7R -55°C to 125°C 1.0nF~10nF 16V~50V ±10%, ±20% AC0612 (Array) NPO -55°C to 125°C 10pF~470pF 50 V ±5%, ±10% X7R -55°C to 125°C 220pF~47nF 16V~50V ±10%, ±20% AC1210 Thickness classes and packing quantities Size code Thickness classification (mm) 0402 0603 0805 1206 Tape width Blister Paper Blister 0.5 ±0.05 / ±0.15 / ±0.20 10 000 --- 50 000 --- 0.8 ±0.1 / ±0.2 4 000 --- 15 000 --- 0.6 ±0.1 4 000 --- 20 000 --- 0.85 4 000 --- 15 000 --- 1.25 ±0.2 --- 3 000 --- 10 000 0.6 ±0.1 4 000 --- 20 000 --- 0.85 ±0.1 4 000 --- 15 000 --- 1.15 ±0.1 --- 3 000 --- 10 000 1.25 ±0.2 --- 3 000 --- 10 000 --- 2 000 --- 10 000 0.85 ±0.1 1812 16 330mm / Ø13” reel Paper 1.6 ±0.2 1210 180mm / Ø7” reel 8 mm --- 4 000 --- 10 000 1.25 ±0.2 --- 3 000 --- --- 1.6 --- 2 000 --- --- 0.85 --- 2 000 --- --- 1.15 --- 1 000 --- --- 1.25 --- 1 000 --- --- 1.6 --- 1 000 --- --- 4 000 --- --- --- 4 000 --- --- --- 0508 (Array) 0.6 0612 (Array) 0.6 0.8 0.8 Dimensions Metric L1 W L2 / L3 min L2 / L3 max L4 min 0402 1005M 1.0 ±0.05 0.5 ±0.05 0.15 0.30 0.40 0603 1608M 1.6 ±0.10 0.8 ±0.10 0.20 0.60 0.40 0805 2012M 2.0 ±0.20 1.25 ±0.20 0.25 0.75 0.55 1206 3216M 3.2 ±0.30 1.6 ±0.20 0.25 0.75 1.40 1210 3225M 3.2 ±0.30 2.5 ±0.20 0.25 0.75 1.40 1812 3245M 4.5 ±0.40 3.2 ±0.30 0.25 0.75 2.20 Inch-based Metric L W A B P 0508 (Array) 1220M 2.0 ±0.15 1.25 ±0.15 0.28 ±0.10 0.2 ±0.10 0.5 ±0.10 0612 (Array) 1632M 3.2 ±0.15 1.6 ±0.15 0.4 ±0.10 0.3 ±0.20 0.8 ±0.10 W L2 L4 L1 L3 Electronic Components for Automotive Applications Inch-based Dimensions Product Information - MLCC Explanation of ordering code AC 0402 K R X7R 8 B B 102 Series name (code 1-2) AC = Automotive grade capacitors Size code (code 3-6) 0402 0603 0805 1206 1210 1812 0508(Array) 0612(Array) Capacitance tolerance (code 7) J = ±5% K=±10% M=±20% Packing style (code 8) R = Paper / PE tape reel Ø7 inch P = Paper / PE tape reel Ø13 inch K = Embossed plastic tape reel Ø7 inch F = Embossed plastic tape reel Ø13 inch TC material (code 9-11) NP0 X7R Capacitance value (code 15-17) 102 = 1 000 pF (2 significant digits+number of zeros; the 3rd digit signifies the multiplying factor, and letter R is decimal point) 0=x1 1 1 = x 10 2 2 = x 10 3 3 = x 10 4 4 = x 10 5 5 = x 10 6 6 = x 10 7 7 = x 10 X X R = Special capacitance (X X: capacitance before decimal point) Process code (code 14) N = NP0 B = X7R Termination (code 13) B = Ni-Barrier Rated voltage (code 12) 5 = 6.3 V 6= 10 V 7 = 16 V 8 = 25 V 9 = 50 V 0 = 100 V A = 200 V = 500 V B = 250 V Y = 630 V Z 17 Product Information - Wireless Components Product Series Part Number Part Number Frequency range Gain Size Assembly Cellular WWAN ANT2112A010B0918A CAN4313284109181B 824~960/ 1710~1990 0~1 dBi 21×12×0.5 SMD ANT3505B000TWPENA CAN4313449009181B 824~960 /1710~2170 2.9 dBi 35×5×6 SMD 824~960/ 1710~2170 4.2 dBi 50×20×0.55 I-PEX dia 1.13, 100mm (new) ANTX100P001BWPEN3 2.4 GHz GPS - (MHz) (mm) ANT1204F001R2400A CAN4311059012451K 2400~2500 6.66 dBi 12×4×2 SMD ANT8010LL04R2400A CAN4311781042453K 2400~2500 5.88 dBi 8.0×1.0×1.0 SMD ANT5320LL45R2400A CAN4311753452451K 2400~2500 5.5 dBi 5.3×2.0×1.2 SMD ANT3216A063R2400A CAN4311212632453K 2400~2500 1.69 dBi 3.2×1.6×0.5 SMD ANT2012LL13R2400A CAN4311714132454K 2400~2500 2.72 dBi 2.0×1.2×1 SMD ANTX200P001B24003 - 2400~2500 4.8 dBi 18.4×7.5×0.55 I-PEX dia 1.13, 200mm ANT1515B00BT1575A CAN43134230B1581B 1575 1.5 dBic 15×15×4 SMD ANT1515B00FT1575A CAN43134230F1581B 1575 1.5 dBic 15×15×4 Pin Solder ANT1818B00BT1575A CAN43134240B1581B 1575 4 dBic 18×18×4 SMD ANT1818B00FT1575A CAN43134240F1581B 1575 4 dBic 18×18×4 Pin Solder ANT2525B00BT1575A CAN43134250B1581B 1575 5.5 dBic 25×25×4 SMD ANT2525B00FT1575A CAN43134250F1581B 1575 5.5 dBic 25×25×4 Pin Solder ANT1818B00BT1516A CAN43134240B1561B 1575 / 1602 1.89 / 2.59 dBi 18×18×4 SMD ANT1818B00DT1516A CAN43134240D1561B 1575 / 1602 2.65 / 2.79 dBi 18×18×4 Pin Solder ANT2525B00BT1516A CAN43134250B1561B 1575 / 1602 3.44 / 4.10 dBi 25×25×4 SMD ANT2525B00DT1516A CAN43134250D1561B 1575 / 1602 3.5 / 3.8 dBi 25×25×4 Pin Solder SDARS ANT2525B00DT2300A CAN43134250D2301B 2300 6 dBic 25×25×4 Pin Solder FM ANT2405F001R0098A CAN4311050010882K 88 N/A 24×5×1.6 SMD Short-Range ANT1204LL05R0915A CAN4311759050911K 915 3.32 dBi 12×4×1.6 ANT1204LL17R0870A CAN4311759170871K 870 1.05 dBi 12×4×1.0 ANT1204F002R0433A CAN4311059020431K 315 / 433 0.79 dBi 12×4×1.6 ANT2405F001R0169A CAN4311050010162K 169 N/A 25×5×1.6 ANT1204LL08R0870A CAN4311759080871K 870 0.5 dBi 12×4×1.6 GPS+Glonass 18 (old) Electronic Components for Automotive Applications Explanation of ordering code Ordering example : ANT3216A063R2400A ANT 3216 A Product Type (code 1) ANT: Antenna BPF: Band-Pass Filter LPF: Low-Pass Filter BLN: Balun BLF: Balun Filter DPX: Diplexer 3216: 3.2 x 1.6 mm 2012: 2.0 x 1.2 mm 2520: 2.5 x 2.0 mm Factory Control Code / Cable Type (code 7) Frequency Band (MHz)(code 6) 2400: 2.4 – 2.5 GHz; 2455: 2.4&5 GHz 1575: GPS; 1516: GPS+Glonass 0433: 433 MHz 0870: 868 MHz 0918: 900/1800 MHz WQUD: 850/900/1800/1900 MHz WPEN: 850/900/1800/1900/2100 MHz Product Information - Wireless Components (1) Size (mm) - SMD (LTCC) (code 2) 063 R 2400 A (2) Connector - Cable length (mm) Stand-alone (code 2) Ex: X100 – IPEX connector, 100 mm cable length X: IPEX, M: MMCX, S: SMA, Z: Stripped 100: 100 mm cable length Type (code 3) L, F, A: Chip antenna / Filter / Balun B: Bulk antenna P: PCB X: FPCB S: Metal E: External J: Integrated antenna Packing Style (code 5) R: Tape & Reel T: Tray B: Bulk Serial No. (code 4) 19 YAGEO - A GLOBAL COMPANY ASIA Dongguan, China Hong Kong, China Mudu, China Tel. +86 769 8772 0275 Fax. +86 769 8791 0053 Tel. +852 2342 6833 Fax. +852 2342 6588 Tel. +86 512 6651 8889 Fax. +86 512 6651 9889 Qingdao, China Suzhou, China Tokyo, Japan Tel. +86 532 8797 0533 Fax. +86 532 8797 0533 Tel. +86 512 6825 5568 Fax. +86 512 6825 5386 Tel. +81 3 6809 3972 Fax. +81 3 6809 3982 Seongnam, Korea Kuala Lumpur, Malaysia Singapore Tel. +82 31 712 4797 Fax. +82 31 712 5866 Tel. +60 3 8063 8864 Fax. +60 3 8063 7376 Tel. +65 6244 7800 Fax. +65 6244 4943 Taipei, Taiwan Tel. +886 2 6629 9999 Fax. +886 2 6628 8886 EUROPE Roermond, Benelux Hamburg, Germany Munich, Germany Tel. +31 475 385 555 Fax. +31 475 385 589 Tel. +49 4121 870 189 Fax. +49 4121 870 271 Tel. +49 8990 7784 380 Fax. +49 8990 7784 379 Szombathely, Hungary Milan, Italy Moscow, Russian Federation Tel. +36 94 517 702 Fax. +36 94 517 701 Tel. +39 02 6129 1017 Fax. +39 02 6601 7490 Tel. +7 916 625 92 38 Fax. +7 498 610 07 07 NORTH AMERICA San Jose, U.S.A. Tel. +1 408 240 6200 Fax. +1 408 240 6201 For a complete listing of all Yageo sales offices, distributors, and representatives, please visit "contact us" at www.yageo.com © YAGEO Corporation All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. Printed in Taiwan Document order number: YL 100 00138 Date of release: Mar 2013