engineered to light up your design www.vcclite.com 1.800.522.5546 1091QM Series Non-Relampable LED Indicator Lights Description and Features Solid-state indicator lights complete with built-in current-limiting resistor and rectifier diode. Ø.630 Mounting: Will snap-fit into Ø.500/.505 hole in panels .020/.100 thick. Push-on speednut SN0461 also available. Mounting hole pattern on page SP2. .380 Terminals: Quick-connect, tinned brass Lens: Polycarbonate 1.070 Anode(+): Marked above terminal Ø.500 MAX. All dimensions in inches. Lens C olor R ed G reen Y ellow Internal R es is tor (ohms ) Bezel: Polished stainless steel. For black finish add “X” after the series letter(s). .187 T E R MINALS Housing: White Nylon S olid S tate Model No. (12V ) 1091QM1-12V 1091QM5-12V 1091QM7-12V 390 Model No. (24V ) 1091QM1-24V 1091QM5-24V 1091QM7-24V 1000 V oltage Table Nominal V AC 12V 24V 10 to 20 22 to 32 V DC 6 to 13.5 12 to 24 Lens C olor Incorporates LE D * R ed 4304H1 G reen 4304H 5 Y ellow 4304H7 * Also incorporates 1N4004 (400 P.I.V.) rectifier diode. To use 24V model: Beyond 32VAC add 30 ohms per volt; beyond 24 VDC add 50 ohms per volt. Use 1/2W resistor up to 50V; 1W resistor for 50V to 70V; 2W resistor for 75V to 125V. Do not use beyond 125V. CML and Chicago Miniature Lamp are registered trademarks of Visual Communications Company, LLC.