1091M Series Non-Relampable LED Indicator Lights 1091M Series Non-Relampable LED Indicator Lights DESCRIPTION AND FEATURES All dimensions in inches. Solid-state indicator lights complete with built-in current-limiting resistor and rectifier diode. Ø.630 Mounting: Will snap-fit into Ø.500/.505 hole in panels .020/.100 thick. Push-on speednut SN0461 also available. Mounting hole pattern on page SP2. .380 Wire Leads: No.22 AWG (105°C),lead color: red and white, 4.40/4.80 long, stripped .430/.570 Lens: Polycarbonate 1.130 Anode(+): Red lead Bezel: Polished stainless steel. For black finish add "X" after the series letter(s). Ø.500 MAX. Housing: White Nylon Lens C olor R ed G reen Y ellow Internal R es is tor (ohms ) Model No. (6V ) 1091M1-6V 1091M5-6V 1091M7-6V 150 LE D Solid S tate Model No. (12V ) 1091M1-12V 1091M5-12V 1091M7-12V 390 V oltage T able Nominal 6V 12V 24V 125 V AC Indicator Model No. (24V ) 1091M1-24V 1091M5-24V 1091M7-24V 1000 Lens C olor V AC VDC 5 to 11 10 to 20 22 to 32 105 to 125 3.5 to 6.5 6 to 13.5 12 to 24 - Model No. (105-125 V AC *) 1091M1-125V AC 1091M5-125V AC 1091M7-125V AC (2) 3.9K1/2 W* (One Internal) Notes: Also incorporates IN4004 (400 P.I.V.) rectifier diode. *125 VAC supplied with 6" white wire, stripped 1/2" with external 3.9K 1/2 watt resistor attached to one lead, covered with shrink tubing insulation. Incorporates LE D* * Also incorporates 1N4004 (400 P.I.V.) rectifier diode. R ed 4304H1 G reen 4304H5 Y ellow 4304H7 To use 24V model: Beyond 32VAC add 30 ohms per volt; beyond 24 VDC add 50 ohms per volt. Use 1/2W resistor up to 50V; 1W resistor for 50V to 70V; 2W resistor for 75V to 125V. Do not use beyond 125V. America: CML Innovative Technologies,Inc. 147 Central Avenue Hackensack, NJ 07601 -USA Tel:1-201-489 -8989 Fax:1-201-489 -6911 e-mail:[email protected] Europe: CML Technologies GmbH &Co.KG Robert-Bunsen-Str.1 67098 Bad Dürkheim -GERMANY Tel:+49 (0)6322 9567-0 Fax:+49 (0)6322 9567-88 e-mail:[email protected] Asia: CML Innovative Technologies,Inc. 61 Aida Street Singapore 459975 Tel:(65)9630 -5003 e-mail:[email protected] CML-IT reserves the right to make specification revisions that enhance the design and/or performance of the product