Extended capability multi chemistry charger EcMC2 250 Lightweight field charger Dependable performance The EcMC2 250 is a state of the art two-channel, four-position charger. Easy to transport and friendly to operate, it automatically recognizes the type of military battery. Recharges batteries simultaneously, regardless of SOC or chemistry. Benefits Electrical characteristics l Charges AC input voltage 85 – 265 V (50-60 Hz,+/- 5%) DC input voltage 11 – 14 V and 19 – 32 V Output power 250 W Charger voltage 4 – 34 V Maximum output current 10 A (per channel) different battery types l Charges different battery chemistries l Fast battery charge l Soldier portable l Worldwide usage l Quiet operation l Intuitive plug-and-charge operation l LED indication of charge status Physical characteristics Length 410 mm Width 240 mm Key features Height 205 mm lAutomatic Weight < 9 kg (AC, DC cables included) Volume 20.2 litres Environmental Protection IP44 (open) IP67 (closed) Operating Temperature Range - 20°C to + 60°C Storage Temperature Range - 40°C to +75°C battery recognition l Charges both channels simultaneously, regardless of battery type or chemistry l Automatic power sharing l Conditioning charge for battery storage l On-board HMI l Rugged construction for a long life of field operations l Lightweight and compact l Wide AC input, for worldwide functionality l Wide DC input, for charging from vehicles, fuel cells, etc... l Input cables (AC, DC) included l Electronic and mechanical batteries interface included Typical applications l Capability to charge more than 50 military Li-ion, Ni-MH and Ni-Cd battery types l Ideal for missions involving various battery types: - Peace keeping - Law enforcement - Exercise and training - Combat May 2010 References Temperature MIL-STD 810E 503.3 Altitude MIL-STD 810E 500.3 II-3 Vibration MIL-STD 810E 514.4 Cat 8 Shock MIL-STD 810E 516.4 I Drop MIL-STD 810E 516.4 IV Salt Fog MIL-STD 810E 509.3 I Immersion MIL-STD 810E 512.3 II-3 NSN 6130 14 564 1779 Part number 09101F EcMC2 250 Technology features Performance characteristics for Li-ion batteries l Microprocessor SAI 2590 2 charged in approx. 5 hours 2 charged in approx. 5 hours SALLY 2 charged in approx. 5 hours PR4G military battery BA684A - ALI142 - ALI146 BA685A - ALI143 controlled l Built-in multiple redundant safety protection l Software field upgradeable (future proof) l BIT (Built In self Test) l DC input automatic cut off to prevent deep discharge of vehicle battery l SM Bus (smart battery) compatible l AC and DC input protection by field re-settable circuit breakers Materials lCase: high impact polypropylene lColour: black lControl panel: aluminium/ABC lCables: 105°C rated PVC Built-in protection devices ensure safety in case of: lExposure to heat to direct sunlight for extended periods lShort circuit lOver voltage lUnder voltage lTransient voltage spikes l Exposure Etc... (capable of charging more than 50 battery types) Safety/Reliability standards Information Technology Equipment EN 60950-1 MTBF (MIL HDBK-217F GB) 40 000 h at 25°C Operational ceiling 700 hPa EMI standards EMC emission EN 61000-6 3 & 4 MIL-STD 461D RE102 Ground Army EMC immunity EN 61000-6 1 & 2 MIL-STD 461D RS103 Ground Army RF emission FCC 47 CFR Ch 1, Pt 15 Mains input connector IEC 320/C References Charger unit 09120A NSN (To Be Advised) Interface GP16497 NSN (To Be Advised) Cable DC/DC GP16715 NSN (To Be Advised) Cable AC/DC GP16716 NSN (To Be Advised) Transportation and storage: l For long term storage use a dry place at a temperature preferably not exceeding + 50°C l Short term storage at - 40°C to + 75°C is possible Doc. No 32010-2-0510 Saft Specialty Battery Group 12, rue Sadi Carnot 93170 Bagnolet – France Tel +33 (0)1 49 93 19 18 Fax +33 (0)1 49 93 19 69 www.saftbatteries.com Information in this document is subject to change without notice and becomes contractual only after written confirmation by Saft. Published by the Communications Department. Photo credit: Saft Société anonyme au capital de 31 944 000 RCS Bobigny B 383 703 873