2573 Connectors (Inlets/Outlets) www.schurter.com/PG07 IEC Appliance Inlet C8, Screw-on or Rivet Mounting, Front Side, Solder, PCB or Quick-connect Terminal C8 70° C Description -Panel Mount: Screw-on mounting, from front side -1 Function -Appliance Inlet, Pin temperature 70 °C, Protection class II -Solder, Quick Connect or PCB Terminal -Solder terminals in horizontal or vertical orientation Approvals -VDE Certificate Number: 40002274 -UL File Number: E96454 -CSA File Number: 27324 Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Material: Housing Characteristics -Contact pins are turned from solid material References We recommend for new applications the type 0720-FS Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-StockCheck, CAD-Drawings, Accessories, Detailed request for product 2.5 A / 250 VAC; 50 Hz 2.5 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 1.5 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 20 acc. to IEC 60529 Suitable for appliances with protection class II acc. to IEC 61140 PA6, black or grey, UL 94V-0 Appliance Inlet C8 acc. to IEC 60320, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 2.5 A, Protection Class II Connectors 1 2573 Connectors (Inlets/Outlets) www.schurter.com/PG07 Dimensions PCB terminal with additional solder terminal in orientation A (horizontal) 34.3 20 28 8.6 20.5 4 5.5 +0.10 0 11.9 11.4 15 1.6 E R3 8.6 ±0.10 3.2 1.3 0.8 8.6 6.5 28 ±0.10 20.2 +0.20 0 11.6 3 +0.20 0 20.4 ax m 4 .R 3.2/M3 E = PCB terminal standard (additional solder): 6.9 mm E = PCB terminal short (additional solder): 0.6 mm E = PCB terminal long (additional solder): 15.9 mm E = PCB terminal standard: 6.6 mm E = PCB terminal short: 5.0 mm E = PCB terminal long: 7.7 mm PCB terminal with additional solder terminal in orientation A (horizontal), screw-on mounting with pre-inserted nuts 34.3 20.4 28 8.6 20.5 4 5.5 +0.10 0 11.9 11.4 15 1.6 E R3 8.6 ±0.10 5 1.3 0.8 8.6 6.5 28 ±0.10 20.2 20.4 +0.20 0 3 +0.20 11.6 0 M2.5 m 2 Connectors 4 .R E = PCB terminal standard (additional solder): 6.9 mm E = PCB terminal short (additional solder): 0.6 mm E = PCB terminal long (additional solder): 15.9 mm E = PCB terminal standard: 6.6 mm E = PCB terminal short: 5.0 mm E = PCB terminal long: 7.7 mm 1) Insert nut 3.2/M3 ax 1) 2573 Connectors (Inlets/Outlets) www.schurter.com/PG07 Quick connect or solder terminal in orientation A (horizontal) or B (vertical) 18 28 7.6 R3 4 5.5 11.9 11.4 15 20.5 E 3.2 34.3 28 ±0.10 20.2 +0.20 0 11.6 3 +0.20 0 20.4 4 .R ax m 3.2/M3 1) 2) E = Solder terminal short: 11.0 mm E = Solder terminal long: 14.7 mm (only orientation B) E = Quick-connect terminal 2.8x0.8 mm: 17.0 mm E = Quick-connect terminal 4.8x0.8 mm: 15.5 mm (only orientation B) 1) Orientation of terminal: A 2) Orientation of terminal: B Config. Code 2573|-|H|-|A|B|C|0-|D|-|E|G|F| The characters are placeholders for the correspondingly keys of selections from the key tables. 2573|-| H |-|A|B|C|0-|D|-|E|G|F| = Type Terminal L Type Configuration key protection class II Configuration key PCB-terminal long (additional solder terminal) 6 X Blade terminal (2.8 x 0.8 mm) 7 2573|-|H|-| A |B|C|0-|D|-|E|G|F| = Terminals Terminal L Configuration key short solder terminal (L = 4.8 mm) 2 Blade terminal (4.8 x 0.8 mm) PCB-terminal (standard) A long solder terminal (L = 8.5 mm) 3 PCB-terminal (short) B PCB-terminal standard (additional solder terminal) 4 PCB-terminal (long) C PCB-terminal short (additional solder terminal) 5 8 2573|-|H|-|A| B |C|0-|D|-|E|G|F| = Terminals Connectors 3 2573 Connectors (Inlets/Outlets) www.schurter.com/PG07 Terminal N Configuration key Color Configuration key short solder terminal (L = 4.8 mm) 2 Black A long solder terminal (L = 8.5 mm) 3 Grey B PCB-terminal standard (additional solder terminal) 4 PCB-terminal short (additional solder terminal) 5 PCB-terminal long (additional solder terminal) 6 Blade terminal (2.8 x 0.8 mm) 7 2573|-|H|-|A|B|C|0-|D|-| E |G|F| = Style Blade terminal (4.8 x 0.8 mm) 8 PCB-terminal (standard) A PCB-terminal (short) B flange with through holes 2 C flange with through holes (special type) 7 PCB-terminal (long) Style Configuration key Symbols similar as in table A 2573|-|H|-|A|B|C|0-|D|-|E| G |F| = Mass S 2573|-|H|-|A|B| C |0-|D|-|E|G|F| = Terminals Terminal Ground Mass "s" Configuration key without terminal 0 Symbols similar as in table A 2573|-|H|-|A|B|C|0-| D |-|E|G|F| = Color Configuration key 00 The dimension "S" is dispalyed in (1/10 mm). This information is also valid for the order code 2573|-|H|-|A|B|C|0-|D|-|E|G| F | = Orientation of Terminals Orientation of Terminals Configuration key horizontal A vertical B All Variants Config. Code Description Order Number 2573-X-2200-A-200A 2573, IEC Appliance Inlet C8, 70°C, , version: II, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 4.8 mm), ground: without terminal, color: Black, design: flange with through holes, dimension S: 6160.0012 2573-X-2200-A-200B 2573, IEC Appliance Inlet C8, 70°C, , version: II, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 4.8 mm), ground: without terminal, color: Black, design: flange with through holes, dimension S: 6160.0013 2573-X-3300-A-200B 2573, IEC Appliance Inlet C8, 70°C, , version: II, L: long solder terminal (L = 8.5 mm), N: long solder terminal (L = 8.5 mm), ground: 6160.0014 without terminal, color: Black, design: flange with through holes, dimension S: 2573-X-5500-A-700A 2573, IEC Appliance Inlet C8, 70°C, , version: II, L: PCB-terminal short (additional solder terminal), N: PCB-terminal short (additional 6160.0015 solder terminal), ground: without terminal, color: Black, design: flange with through holes (special type), dimension S: 2573-X-7700-A-200A 2573, IEC Appliance Inlet C8, 70°C, , version: II, L: Blade terminal (2.8 x 0.8 mm), N: Blade terminal (2.8 x 0.8 mm), ground: without terminal, color: Black, design: flange with through holes, dimension S: █ █ 6160.0016 The listet variants should be available from stock Other versions on request www.schurter.com/contact █ Most Popular. Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 100 Pcs 24.08.2015 Packaging unit 4 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.