2578 Connectors (Inlets/Outlets) www.schurter.com/PG07 IEC Appliance Inlet C8, Snap-in Mounting, Front Side, Solder, PCB or Quick-connect Terminal Snap-In Version C8 70° C Description -Panel Mount: Snap-in version, Front Side -1 Function -Appliance Inlet, Pin temperature 70 °C, Protection class II -Solder, Quick Connect or PCB Terminal Approvals -VDE Certificate Number: 40002274 -UL File Number: E96454 Characteristics -Contact pins are turned from solid material Other versions on request -Variants in white color References Alternative: version for screw mounting 2576 Alternative: version with line filter 5008 Alternative: Inlet with retainer and country specific cord set Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-StockCheck, CAD-Drawings, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Panel Thickness s Material: Housing 2.5 A / 250 VAC; 50 Hz 7 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 1.5 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 20 acc. to IEC 60529 Suitable for appliances with protection class II acc. to IEC 61140 Snap-in version 1.5/2/2.5/3 mm PA6, black or grey, UL 94V-0 Appliance Inlet C8 acc. to IEC 60320 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 2.5 A, Protection Class II Connectors 1 2578 Connectors (Inlets/Outlets) www.schurter.com/PG07 Dimensions PCB terminal with additional solder terminal in orientation A (horizontal) 17.2 27.2 15 3 R3 +0.10 0 ø1.6 7 7 E 16 11.6 8.6 ±0.10 9.9 1.3 0.8 12.8 8.6 +0.20 0 20.1 +0.20 0 1 .R ax m (24) 7.2 0 11.7 X 0.8 1 .R ax m 1) 11.7 24.1 +0.20 +0.20 0 +0.20 0 24.1 +0.20 0 27 (20) 2) E = PCB terminal standard (additional solder): 6.8 mm E = PCB terminal short (additional solder): 0.7 mm E = PCB terminal long (additional solder): 15.8 mm E = PCB terminal standard: 6.5 mm E = PCB terminal short: 5.0 mm E = PCB terminal long: 7.6 mm 1) Panel cut-out for panel thickness 1.5 / 2.0 / 2.5 / 3.0 mm 2) Panel cut-out for panel thickness 1.0 mm Quick connect or solder terminal in orientation A (horizontal) E 27.2 3 7 R3 16 11.6 9.9 15 27 24.1 +0.20 0 (24) E = Solder terminal short: 17.3 mm E = Solder terminal long: 21.0 mm E = Quick-connect terminal 2.8x0.8 mm: 23.3 mm 1) Panel cut-out for panel thickness 1.5 / 2.0 / 2.5 / 3.0 mm 2) Panel cut-out for panel thickness 1.0 mm 2 Connectors m 20.1 +0.20 0 7.2 0 11.7 X 0.8 . ax R1 1 .R ax 1) m 2) 11.7 +0.20 0 +0.20 0 24.1 +0.20 (8.6) +0.20 0 (20) 2578 Connectors (Inlets/Outlets) www.schurter.com/PG07 Quick connect or solder terminal in orientation B (vertical) E 27.2 3 7 7 R3 16 11.6 9.9 15 27 +0.20 0 20.1 +0.20 0 R1 1 .R ax m (24) 7.2 0 11.7 X 0.8 . ax 1) m 11.7 24.1 +0.20 +0.20 0 +0.20 0 24.1 +0.20 0 (20) (14.8) 2) E = Solder terminal short: 17.3 mm E = Solder terminal long: 21.0 mm E = Quick-connect terminal 2.8x0.8 mm: 23.3 mm E = Quick-connect terminal 4.8x0.8 mm: 21.8 mm E = Quick-connect terminal 6.3x0.8 mm: 22.8 mm 1) Panel cut-out for panel thickness 1.5 / 2.0 / 2.5 / 3.0 mm 2) Panel cut-out for panel thickness 1.0 mm Config. Code 2578|-|H|-|A|B|C|0-|D|-|E|G|F| The characters are placeholders for the correspondingly keys of selections from the key tables. 2578|-| H |-|A|B|C|0-|D|-|E|G|F| = Type Terminal L Type Configuration key protection class II Configuration key PCB-terminal long (additional solder terminal) 6 X Blade terminal (2.8 x 0.8 mm) 7 2578|-|H|-| A |B|C|0-|D|-|E|G|F| = Terminals Terminal L Configuration key short solder terminal (L = 4.8 mm) 2 Blade terminal (4.8 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) 3 PCB-terminal (standard) A PCB-terminal standard (additional solder terminal) 4 PCB-terminal (short) B PCB-terminal short (additional solder terminal) 5 9 long solder terminal (L = 8.5 mm) 8 PCB-terminal (long) C Connectors 3 2578 Connectors (Inlets/Outlets) www.schurter.com/PG07 2578|-|H|-|A| B |C|0-|D|-|E|G|F| = Terminals Terminal N Configuration key short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 PCB-terminal standard (additional solder terminal) 4 PCB-terminal short (additional solder terminal) 5 PCB-terminal long (additional solder terminal) 6 Blade terminal (2.8 x 0.8 mm) 7 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 PCB-terminal (standard) A PCB-terminal (short) B PCB-terminal (long) C Color Configuration key Black A Grey B 2578|-|H|-|A|B|C|0-|D|-| E |G|F| = Style Style Configuration key snap-in (s=panel thickness) 4 2578|-|H|-|A|B|C|0-|D|-|E| G |F| = Mass S Mass "s" Configuration key Symbols similar as in table A 15 20 2578|-|H|-|A|B| C |0-|D|-|E|G|F| = Terminals Terminal Ground 25 Configuration key without terminal 0 30 The dimension "S" is dispalyed in (1/10 mm). This information is also valid for the order code Symbols similar as in table A 2578|-|H|-|A|B|C|0-| D |-|E|G|F| = Color 2578|-|H|-|A|B|C|0-|D|-|E|G| F | = Orientation of Terminals Orientation of Terminals Configuration key horizontal A vertical B All Variants Config. Code Description Order Number 2578-X-2200-A-415B 2578, IEC Appliance Inlet C8, 70°C, , version: II, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 4.8 mm), ground: without terminal, color: Black, design: snap-in (s=panel thickness), dimension S: 6160.0029 2578-X-3300-A-420B 2578, IEC Appliance Inlet C8, 70°C, , version: II, L: long solder terminal (L = 8.5 mm), N: long solder terminal (L = 8.5 mm), ground: 6160.0031 without terminal, color: Black, design: snap-in (s=panel thickness), dimension S: 2578-X-9900-A-415B 2578, IEC Appliance Inlet C8, 70°C, , version: II, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), ground: without terminal, color: Black, design: snap-in (s=panel thickness), dimension S: 6160.0032 2578-X-2200-A-425B 2578, IEC Appliance Inlet C8, 70°C, , version: II, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 4.8 mm), ground: without terminal, color: Black, design: snap-in (s=panel thickness), dimension S: 6160.0036 2578-X-9900-A-420B 2578, IEC Appliance Inlet C8, 70°C, , version: II, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), ground: without terminal, color: Black, design: snap-in (s=panel thickness), dimension S: 6160.0069 2578-X-2200-A-420B 2578, IEC Appliance Inlet C8, 70°C, , version: II, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 4.8 mm), ground: without terminal, color: Black, design: snap-in (s=panel thickness), dimension S: 6160.0071 2578-X-9900-A-425B 2578, IEC Appliance Inlet C8, 70°C, , version: II, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), ground: without terminal, color: Black, design: snap-in (s=panel thickness), dimension S: 6160.0074 2578-X-7700-A-415B 2578, IEC Appliance Inlet C8, 70°C, , version: II, L: Blade terminal (2.8 x 0.8 mm), N: Blade terminal (2.8 x 0.8 mm), ground: without terminal, color: Black, design: snap-in (s=panel thickness), dimension S: 6163.0016 The listet variants should be available from stock Other versions on request www.schurter.com/contact █ Most Popular. Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 4 100 Pcs Connectors █ █ █ █ 2578 Connectors (Inlets/Outlets) www.schurter.com/PG07 Accessories Description Retainer Retainer for power supply cord Mating Outlets/Connectors Category / Description Power Cord Overview complete Cord Sets 2.5 A, IEC Connector, Black, 2.0 m, H03VVH2-F 2x0,75mm2, Connector IEC C7, 001500 mm, cord end: 6013.0474 Cord Sets 2.5 A, IEC Connector, Black, 4.0 m, H03VVH2-F 2x0,75mm2, Connector IEC C7, 001500 mm, cord end: 6013.0478 Power Cord further types to 2578 Power Supply Cord Overview complete Cord Sets 2.5 A, North America, Black, 2.0 m, SVT 2x18AWG, Connector IEC C7, 002500 mm, cord end: 6010.5274 Cord Sets 2.5 A, North America, Black, 4.0 m, SVT 2x18AWG, Connector IEC C7, 002500 mm, cord end: 6010.5278 Power Supply Cord further types to 2578 24.08.2015 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 5