MAT Non resettable fuses www.schurter.com/PG01_2 DTCN · 500 VAC · 250 VDC · Time-Lag T Description References -High breaking capacity Last order date: 31.12.2016 This type is Phase-out without alternate type Standards Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product -DTCN: T/5920 CC Technical Data E 50 mm ø 14±0.2 500 VAC, 250 VDC 1 - 20 A 100 kA Time-Lag T -40 °C to 55 °C 40/055/21 acc. to IEC 60068-1 Ceramic 25 g 0 °C to 60 °C, max. 70% r.h. Rated voltage AS Rated Voltage Rated current Breaking Capacity Characteristic Admissible Ambient Air Temp. Climatic Category Material: Tube Unit Weight Storage Conditions Product Marking Dimension OU T Special Fuse, 14 x 50 mm, Time-Lag T, 500 VAC, 250 VDC 13 13 3 PH 50 +1.5 Pre-Arcing Time Rated Current In 1 A - 20 A 1.25 x In min. 1.65 x In max. 60 min 60 min 2.0 x In min. 5.0 x In min. 5.0 x In max. 2.5 s 30 ms 2.5 s 10.0 x In min. 10.0 x In max. 8 ms 200 ms Fuses 1 MAT Non resettable fuses www.schurter.com/PG01_2 Time-Current-Curves T 100000 10000 1000 OU Time in Seconds 100 10 1 0.1 0.01 0.001 10 1 All Variants Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] 1 500 250 1) 4 500 250 1) 6 500 250 1) 10 500 250 1) Order Number Voltage Drop 1.0 In typ. [mV] 1600 l l 7025.5110 680 l l 7025.5130 420 l l 7025.5140 110 l l 7025.5150 AS 15 20 Breaking Capacity E- Multiple of Rated Current In 500 250 1) 105 7025.5170 500 250 1) 100 7025.5160 Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/StockCheck-SCHURTER 1) 100 kA @ 500 VAC , p.f. ≥ 0.15 / 10 kA @ 50 VDC , L/R < 10 ms Small Box Pack (10 pcs.) 2 Fuses 08.06.2015 PH Packaging Unit The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.