FMS (250V) Fuseholder Blocks & Clips www.schurter.com/PG02b Fuseholder Open Design, Holder for MSx 250, THT 250 V · 1.6 W / 6.3 A (VDE) /6.3 A (UL/CSA) Description References -Through hole mounting Fuseholder to MSF 250; MST 250; MSTU 250; MSU 250; MXT 250 Standards Weblinks -UL 4248-1 -CSA 22.2 no. 4248-1 Approvals -VDE Certificate Number: 40041146 -UL File Number: E39328 pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product Technical Data Fuse-Link Mounting Terminal Rated Voltage Rated current Rated Power Acceptance IEC Soldering Methods Microfuse 250 V PCB Solder THT 250 V (UL/CSA) 6.3 A (VDE) / 6.3 A (UL/CSA) 1.6 W / 6.3 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 30 with installed fuse Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight 0.37 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type Dimension Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Insulation Resistance Overvoltage Category Pollution Degree Wave Soldering Profile 245 °C / 3 sec acc. to IEC 60068-2-20, Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 1A < 10 mΩ at 20 mV acc. to IEC 60127-6 > 2.5 kV between Life parts (50 Hz; 1 min) > 10 MΩ between Life parts (500 VDC; 1 min) III acc. to IEC 60664-1 2 acc. to IEC 60664-1 7.6 mm 4.4 3.2 1 4.3 Variant 0031.7601 8.5 5.08 ø 1.4 R 0.75 5.08 ø1 ø 9.5 ø 0.5 3 45˚ Drilling diagram Fuses 1 FMS (250V) Fuseholder Blocks & Clips www.schurter.com/PG02b All Variants Holder l Order Number 0031.7601 █ █ Most Popular. Availability for all products can be searched real-time:http://www. schurter.com/en/Stock-Check/StockCheck-SCHURTER Plastic box (100 pcs.) 17.09.2015 Packaging Unit 2 Fuses The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.