231819 Fuseholder Blocks & Clips www.schurter.com/PG02 Fuseholder Open Design, Holder for FRT 250x, THT 250 VAC Description References Approvals Weblinks -Through hole mounting Fuseholder to FRT 250F; FRT 250T -UL File Number: E41738 pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product Technical Data Fuse-Link Mounting Terminal Rated Voltage Rated current Degree of Protection Admissible Ambient Air Temp. Climatic Category Material: Terminals Unit Weight Storage Conditions FRT Fuse PCB Solder THT 250 VAC 6.3 A IP 30 -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 Tin-Plated Copper Alloy 0.4 g 0 °C to 60 °C, max. 70% r.h. Dimension Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Wave 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 1A < mΩ at 20 mV 12 mm 12 7.5 -0.1 20 1.6 4.2 7.5 5 7.4 0.7 ø 1.8 Drilling diagram All Variants Holder Order Number l 7149.9019.03 Packaging Unit 03.03.2015 Availability for all products can be searched real-time:http://www. schurter.com/en/Stock-Check/StockCheck-SCHURTER Plastic Bag (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Fuses 1