R1200F THRU R2000F HIGH VOLTAGE FAST RECOVERY RECTIFIER Reverse Voltage - 1200 to 2000 Volts FEATURES DO-15 DO-41 The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 250 C/10 seconds,0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension 1.0 (25.4) MIN. 1.0 (25.4) MIN. 0.140 (3.6) 0.104(2.6) DIA. 0.107 (2.7) 0.080 (2.0) DIA. 0.300(7.6) 0.230(5.8) 0.205 (5.2) 0.160(4.1) MECHANICAL DATA 1.0 (25.4) MIN. 1.0 (25.4) MIN. Case: JEDEC DO-41/DO-15 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.012 ounce, 0.33 grams(DO-41) 0.014 ounce, 0.40 grams(DO-15) 0.034 (0.86) 0.028 (0.70) DIA. 0.034 (0.86) 0.028 (0.70) DIA. Forward Current -0.5/0.2 Ampere Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. MDD Catalog Number Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375”(9.5mm) lead length (see fig.1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 0.5/0.2 A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range SYMBOLS R1200F R1500F R1800F R2000F UNITS VRRM VRMS VDC 1200 840 1200 1500 1050 1500 1800 1260 1800 2000 1400 2000 VOLTS VOLTS VOLTS 0.2 Amp I(AV) 0.5 IFSM VF 30.0 4.0 2.5 5.0 50.0 IR Amps Volts µA trr 500 ns CJ 15.0 50.0 -65 to +150 pF C/W C RθJA TJ,TSTG Note:1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A 2.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3.Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted MDD ELECTRONIC FIG. 1- FORWARD CURRENT DERATING CURVE 0.5 0.4 Single Phase Half Wave 60Hz Resistive or inductive Load 0.3 0.2 0.1 R1200F-R1800F R2000F 0 0 25 50 75 100 125 150 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RATINGS AND CHARACTERISTIC CURVES R1200F THRU R2000F FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 25 20 15 10 175 5.0 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 1 10 AMBIENT TEMPERATURE, C 4 2 0.2 TJ=25 C PULSE WIDTH=300 µs 1%DUTY CYCLE 0.02 R1200F-R1800F R2000F 0.002 1.6 2.4 3.2 4 4.4 FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 0.8 1,000 100 10 TJ=100 C 1 TJ=25 C 0.1 0.01 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS TJ=25 C 10 TRANSIENT THERMAL IMPEDANCE, C/W FIG. 5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 20 40 60 80 FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE 100 10 1 0.1 0.01 0.1 1 10 1 0.1 1.0 10 100 PERCENT OF PEAK REVERSE VOLTAGE,% 200 100 100 NUMBER OF CYCLES AT 60 Hz 100 REVERSE VOLTAGE,VOLTS MDD ELECTRONIC t,PULSE DURATION,sec. 100