Isolation Test of the Temperatur Sensor in the Vincotech P08X, P18X, P48X Modules Attila Öri, Vincotech Kft., Kossuth Lajos u. 59, H-2060 Bicske (Hungary) Substrate isolation measurement P08x power module to backplane At all Vincotech modules of the series P80, P48X, P18X is the isolation of the temperature sensor tested. NTC Other Pins Test Conditions: Test Voltage VTest = 4kV The test limit IIs = 10µA. This is a 100% test meaning all modules shipped passed the test. Test conditions: Vtest=4kD DC 2s Iis Test limits: 0 < Iis < 10uA Vtest GND Thermistor isolation measurement P08x power module to backplane NTC Other Pins Test conditions: Vtest=4kD DC 2s Iis Test limits: 0 < Iis < 10uA Vtest GND Status 25th of May 2005