2/7 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 3.2x2.5 12.0MHz MODEL NO.: TZ0327A REV. NO.: 7 Revise: Rev. Rev. Page Rev. Account Date Ref. No. Revised by 1 2 3 4 5 6 7 N/A 3 3 3 5 4 4 Initial release Spec. updated Spec. updated Spec. updated Changed T/R drawing Add base 2 drawing Base 2 cancel, and Pin connection updated 12/11/03 2/18/04 8/12/05 8/08/06 7/01/09 04/29/10 12/23/10 N/A N/A N/A N/A ECN-200900240 ECN-20100161 ECN-201000472 Ann Liu Ann Liu Ann Liu Ann Liu Ann Liu Ann Liu Ann Liu TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3/7 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 3.2x2.5 12.0MHz MODEL NO.: TZ0327A REV. NO.: 7 Features: z z z z Surface Mount Hermetic Package Excellent Reliability Performance Good Frequency Perturbation and Stability over temperature Ultra Miniature Package RoHS Compliant Lead free Lead-free soldering Description and Applications: Surface mount 3.2mmx2.5mm crystal unit for use in wireless communications devices, especially for a need of ultra miniature package for mobility. Electrical Specifications: TZ0327A Specification Nominal Frequency 12.000000 MHz Mode of Oscillation Fundamental Storage Temperature Range -40°C to +85°C Operating Temperature Range -10°C to +60°C Frequency Stability over Operating Temperature +/- 30 ppm (referred to the value at 25°C) Frequency Make Tolerance (FL) +/- 30 ppm @ 25°C +/- 3°C Equivalent Series Resistance (ESR) 100 Ω max. Nominal Drive Level 10 uW Shunt Capacitance (Co) 5.0 pF max Load Capacitance (CL) 20 pF Insulation Resistance 500 MΩ min./DC 100V Marking Laser Marking Unit Weight 0.017+/-0.005 g TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4/7 Mechanical Dimensions (mm): Recommended Land Pattern: (unit: mm) Marking: Line 1: Frequency (12.00) Line 2: TST Logo + Crystal Product Code + Date Code + Traceability code ( 1 or 2 letters) Pin#2 Pin#1 Pin#3 Pin#4 The inner vision of Pin#1, Pin#4 side is XTAL blank mounting pad. Product Code Table Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5/7 Reel Dimensions (mm): Tape Dimensions (mm): [NOTE] 1 UNIT : mm. 2 UNLESS OTHERWISE SPECIFIED TOLERANCEON DIM. +/-0.1mm. 3 MATERIAL : CONDUCTIVE POLYSTYRENE. 4 COLOR : BLACK. 5 10 PITCHES CUMULATIVETOLERANCE +/-0.2mm. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6/7 Packing Quantity/Packing: 3K pcs maximum per reel Reflow Profile: Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7/7 Reliability Specifications Test name Reference standard Test process / method Mechanical characteristics resistance to Soldering heat (IR reflow) Temp./ Duration : 260°C /10sec ×2 times Total time : 4min.(IR-reflow) Vibration Total peak amplitude : 1.5mm Vibration frequency : 10 to 55 Hz Sweep period : 1.0 minute Vibration directions : 3 mutually perpendicular Duration : 2 hr / direc. directions : 3 impacts per axis Acceleration : 3000g's, +20/-0 % Duration : 0.3 ms (total 18 shocks) Waveform : Half-sine Solder Temperature:265±5°C Duration time: 5±0.5 seconds. Mechanical Shock Solderability EIAJED-4701 -300(301)M(II) MIL-STD 202F method 201A MIL-STD 202F method 213C MIL-STD 883G method 2003 Environmental characteristics Thermal Shock Humidity test Dry heat ( Aging test ) PCT test Heat cycle conditions -55 ℃ (30min) ←→ * cycle time : 10 times 125 ℃ (30min) Temperature : 70 ± 2 °C Relative humidity : 90~95% Duration : 96 hours Temperature : 125 ± 2 °C Duration : 168 hours 2 MIL-STD 883G method 1010.7 MIL-STD 202F method 103B 5 Pressure: 2.06kg/cm (2.03*10 pa) Temperature : 121 ± 2 °C Relative humidity : 100% Duration : 24 hours TAI-SAW TECHNOLOGY CO., LTD. MIL-STD 883G method 1008.2 condition C EIAJED-4701-3 B-123A TST DCC Release document