VER : PA_3 update : 2014.03.28 AC-DC Power Module AQC200 SERIES 200 Watts KEY FEATURES Switching Power Module for PCB Mountable High Efficiency up to 92% Active PFC Function, >0.95 (230Vac), >0.98 (115Vac) Universal Input: 90-264 VAC Low Leakage Current, <0.5mA Four M3 Mounting Holes Optional on Bottom Side EN55022 Class B Meets Continuous Short Circuit Protection with Hiccup Mode and Auto Recover 3-Years Product Warranty ELECTRICAL SPECIFICATIONS Model No. AQC200-12S Max Output Wattage (W) Voltage 200 W Input Output Protection Isolation AQC200-48S 90-264 VAC or 120-370 VDC Frequency (Hz) 47-63 Hz Current (Full load) <2.0 A max. (115 VAC) / <1.0 A max. (230 VAC) Inrush Current (<2ms) < 35 A max. (115 VAC) / < 70 A max. (230 VAC) Leakage Current < 0.75 mA max. Power Factor PF>0.98 (115 VAC) / PF>0.95 (230 VAC) at Full Load Voltage (V.DC.) 12V Voltage Accuracy ±2% Current (A) max 16.66 Line Regulation (LL-HL) (typ.) ±1% 24V 48V 8.33 4.17 Load Regulation (5-100%) (typ.) ±1% Minimum Load 1% Maximum Capacitive Load 5,000µF 2,000µF 1,000µF Ripple & Noise max. 240mV 240mV 480mV 90% 92% Efficiency (typ.) 88% Hold-up Time (at 115 VAC) 10 ms min. Over Power Protection Auto recovery Over Temperature Protection Auto recovery Over Voltage Protection Zener diode clamp Short Circuit Protection Auto recovery, Hiccup mode Input-Output (V.AC) 3000V Input-FG (V.AC) 1500V Output-FG .(V.AC) Operating Temperature Environment AQC200-24S 500V -25°C…+70°C (with derating) Storage Temperature -25°C…+85°C Temperature Coefficient ±0.03%/°C ( 0~50°C ) Humidity 95% RH MTBF >250,000 h @ 25°C (MIL-HDBK-217F, Notice 1) Vibration 10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes. Dimension (L x W x H) 7.5 x 3.5 x 1.97 Inches Physical Weight Pending Cooling Method Free convection Safety Agency Approvals EMI CE, UL60950-1, CB EMC (Conducted & Radiated Emission) EMS (Noise Immunity) ( 190.5 x 89.0 x 50.0 mm ) Tolerance 0.5 mm (Pending) EN 55022 class B (Conductive plane to be connected to safety earth) EN 55024 (Pending) (Pending) 1.All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. 2.Ripple & Noise are measured at 20MHz of bandwidth with 0.1UF & 47UF parallel capacitor. 3.Hold-up Time measured at 90% Vout. http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : PA_3 update : 2014.03.28 AC-DC Power Module AQC200 SERIES 200 Watts MECHANICAL DIMENSION ( Top View ) PIN# Single 1 FG 2 AC IN (N) 3 AC IN (L) 4 +DC OUT 5 +DC OUT 6 -DC OUT 7 -DC OUT DERATING BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : PA_3 update : 2014.03.28 AC-DC Power Module AQC200 SERIES 200 Watts EFFICIENCY VERSUS LOAD AQC200-12S VIN Input Voltage (V) VS 90 Efficiency 115 180 230 264 Efficiency (%) Load (%) LOAD VS Efficiency 10 20 30 40 50 60 70 80 90 100 LOAD VS 10 20 30 40 50 60 70 80 90 100 115V (%) 230V (%) Load (%) 115V (%) 230V (%) AQC200-24S VIN Input Voltage (V) 90 VS Efficiency 115 180 Efficiency (%) 230 264 Load (%) Efficiency 115V (%) 230V (%) Load (%) http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -3- VER : PA_3 update : 2014.03.28 AC-DC Power Module AQC200 SERIES 200 Watts EFFICIENCY VERSUS LOAD AQC200-48s VIN Input Voltage (V) 90 VS Efficiency 115 180 Efficiency (%) 230 264 Load (%) LOAD VS Efficiency 10 20 30 40 50 60 70 80 90 100 115V (%) 230V (%) Load (%) 115V (%) 230V (%) http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -4-