VER : E_1 update : 2014.07.24 AC-DC Power Module ATC SERIES 10 Watts KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL Approval 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Single Output ) Max Output Wattage (W) Voltage Input Output Protection Isolation Environment Physical Safety EMC ATC-3.3S ATC-5S ATC-12S ATC-15S ATC-24S 10W 10W 10W 10W 10W 90-264 VAC or 120-370 VDC Frequency (Hz) 47-440 Hz Current (Full load) 200 mA max. (115 VAC) / 130 mA max. (230 VAC) Inrush Current (<2ms) 10 A max. (115 VAC) / 20 A max. (230 VAC) Leakage Current 0.75 mA max. External Fuse (recommend) 1.5 A slow blow type Voltage (V.DC.) 3.3V Voltage Accuracy ±2% 5V 12V 15V 24V 2000 833 666 426 Current (mA) max 3000 Line Regulation (LL-HL) (typ.) ±0.5% Load Regulation (5-100%) (typ.) ±1% Minimum Load 4% 5% 5% 3% 5% Maximum Capacitive Load 70000 uF 35000 uF 11000 uF 7000 uF 2300 uF Ripple <0.2% Vout +40mV max (Vp-p) Noise <0.5% Vout +50mV max (Vp-p) Efficiency 65% 76% 75% 76% Hold-up Time 15 ms min. Switching Frequency 100 kHz 71% Over Power Protection Hiccup technique, auto-recovery Over Voltage Protection Zener diode clamp Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Input-Output (V.AC) 3000V Input-FG (V.AC) 1500V Output-FG (V.AC) 500V Operating Temperature -25°C…+70°C (with derating) Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C Humidity 95% RH MTBF >250,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 2.53 x 1.78 x 0.85 Inches Case Material Plastic resin with Fiberglass (flammability to UL 94V-0) Weight 92 g Cooling Method Free air convection Agency Approvals UL/cUL, CE EMI (Conducted & Radiated Emission) EN 55022 class B EMS (Noise Immunity) EN 50082-1 http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 ( 64.3 x 45.1 x 21.7 mm ) Tolerance 0.5 mm -1- VER : E_1 update : 2014.07.24 AC-DC Power Module ATC SERIES 10 Watts ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Dual Output ) Max Output Wattage (W) Voltage Input Output Protection Isolation Environment Physical Safety EMC ATC-5D 8W ATC-12D 10W ATC-15D 10W 90-264 VAC or 120-370 VDC Frequency (Hz) 47-440 Hz Current (Full load) 200 mA max. (115 VAC) / 130 mA max. (230 VAC) Inrush Current (<2ms) 10 A max. (115 VAC) / 20 A max. (230 VAC) Leakage Current 0.75 mA max. External Fuse (recommend) 1.5 A slow blow type Voltage (V.DC.) ±5V Voltage Accuracy ±2% ±12V ±15V ±380 ±300 Current (mA) max ±800 Line Regulation (LL-HL) (typ.) ±0.5% Load Regulation (5-100%) (typ.) ±1% Minimum Load 1% 3% 1% Maximum Capacitive Load ±22000 uF ±3000 uF ±2000 uF Ripple <0.2% Vout +40mV max (Vp-p) Noise <0.5% Vout +50mV max (Vp-p) Efficiency 73% 75% 74% Hold-up Time 15 ms min. Switching Frequency 100 kHz Over Power Protection Hiccup technique, auto-recovery Over Voltage Protection Zener diode clamp Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Input-Output (V.AC) 3000V Input-FG (V.AC) 1500V Output-FG (V.AC) 500V Operating Temperature -25°C…+70°C (with derating) Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C Humidity 95% RH MTBF >250,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 2.53 x 1.78 x 0.85 Inches Case Material Plastic resin with Fiberglass (flammability to UL 94V-0) Weight 92 g Cooling Method Free air convection Agency Approvals UL/cUL, CE EMI (Conducted & Radiated Emission) EN 55022 class B EMS (Noise Immunity) EN 50082-1 ( 64.3 x 45.1 x 21.7 mm ) Tolerance 0.5 mm NOTE 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. It's recommended to add Varistor 14S471K at L / N input side in parallel. http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : E_1 update : 2014.07.24 AC-DC Power Module ATC SERIES MECHANICAL DIMENSION 10 Watts ( Top View ) BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 PIN# Single Dual 1 FG FG 2 AC IN (N) AC IN (N) 3 AC IN (L) AC IN (L) 4 -DC OUT -DC OUT 5 NO PIN COMMON 6 +DC OUT +DC OUT DERATING -3- VER : E_1 update : 2014.07.24 AC-DC Power Module ATC SERIES 10 Watts SCREW TERMINAL ATC-A2 PIN# Single Dual 1 FG FG 2 AC IN (N) AC IN (N) 3 AC IN (L) AC IN (L) 4. NO CONNECT NO CONNECT 5 -DC OUT -DC OUT 6 NO CONNECT COMMON 7 +DC OUT +DC OUT 8 NO CONNECT NO CONNECT PIN# Single Dual ATC-A5 1 FG FG 2 AC IN (N) AC IN (N) 3 AC IN (L) AC IN (L) 4. NO CONNECT NO CONNECT 5 -DC OUT -DC OUT 6 NO CONNECT COMMON 7 +DC OUT +DC OUT 8 NO CONNECT NO CONNECT http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -4-