VER : A_1 update : 94.08.25 AC-DC Switching Power Supply ATC DN SERIES 10 Watts KEY FEATURES Din Rail Switching Power Supply Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise High Efficiency CE, UL, TUV Approval 2-Years Product Warranty ELECTRICAL SPECIFICATIONS Model No. ( Single Output ) Max Output Wattage (W) Voltage Input Output Protection Isolation Environment Physical Safety EMC ATC-3.3S-DN ATC-5S-DN ATC-12S-DN ATC-15S-DN ATC-24S-DN 10W 10W 10W 10W 10.2W 90-264 VAC or 120-370 VDC Frequency (Hz) 47-440 Hz Current (Full load) 200 mA max. (115 VAC) / 130 mA max. (230 VAC) Inrush Current (<2ms) 10 A max. (115 VAC) /20 A max. (230 VAC) Leakage Current 0.75 mA max. Voltage (V.DC.) 3.3V Voltage Accuracy ±2% Current (mA) max 3000 Line Regulation (LL-HL) (typ.) ±0.3%. Load Regulation (5-100%) (typ.) ±0.5% 5V 12V 15V 24V 2000 833 666 426 5% 5% 3% 5% 73% 70% 68% Minimum Load 4% Maximum Capacitive Load 470-23,000µF depending on model Ripple <0.2% Vout +40mV max (Vp-p) Noise <0.5% Vout +50mV max (Vp-p) Efficiency 65% Hold-up Time 15 ms min. Switching Frequency 100 kHz Over Power Protection Hiccup technique, auto-recovery Over Voltage Protection Zener diode clamp Short Circuit Protection Hiccup mode, indefinite (automatic recovery) 71% Input-Output (V.AC) 3000V Input-FG (V.AC) 1500V Output-FG (V.AC) 500V Operating Temperature -25°C…+70°C (with derating) Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C Humidity 95% RH MTBF >250,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 3.2 x 3.47 x 1.89 Inches Case Material Plastic resin with Fiberglass (flammability to UL 94V-2) Weight 180 g Cooling Method Free air convection Agency Approvals UL/cUL, CE, TUV EMI (Conducted & Radiated Emission) EN 55022 class B EMS (Noise Immunity) EN 50082-1 ( 81.0 x 88.0 x 48.0 mm ) Tolerance ±0.5 mm All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : A_1 update : 94.08.25 AC-DC Switching Power Supply ATC DN SERIES 10 Watts ELECTRICAL SPECIFICATIONS Model No. ( Dual Output ) Max Output Wattage (W) Voltage Output Protection Isolation Environment Physical Safety EMC ATC-12D-DN ATC-15D-DN 8W 9.12W 9W 90-264 VAC or 120-370 VDC Frequency (Hz) Input ATC-5D-DN 47-440 Hz Current (Full load) 200 mA max. (115 VAC) / 130 mA max. (230 VAC) Inrush Current (<2ms) 10 A max. (115 VAC) /20 A max. (230 VAC) Leakage Current 0.75 mA max. Voltage (V.DC.) ±5V Voltage Accuracy ±2% Current (mA) max ±800 Line Regulation (LL-HL) (typ.) ±0.3%. Load Regulation (5-100%) (typ.) ±0.5% ±12V ±15V ±380 ±300 3% 1% Minimum Load 1% Maximum Capacitive Load 470-23,000µF depending on model Ripple <0.2% Vout +40mV max (Vp-p) Noise <0.5% Vout +50mV max (Vp-p) Efficiency 71% Hold-up Time 15 ms min. Switching Frequency 100 kHz 75% Over Power Protection Hiccup technique, auto-recovery Over Voltage Protection Zener diode clamp Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Input-Output (V.AC) 3000V Input-FG (V.AC) 1500V Output-FG (V.AC) 500V Operating Temperature -25°C…+70°C (with derating) Storage Temperature -40°C…+85°C Temperature Coefficient 0.02%/°C Humidity 95% RH MTBF >250,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 3.2 x 3.47 x 1.89 Inches Case Material Plastic resin with Fiberglass (flammability to UL 94V-2) Weight 180 g Cooling Method Free air convection Agency Approvals UL/cUL, CE, TUV EMI (Conducted & Radiated Emission) EN 55022 class B EMS (Noise Immunity) EN 50082-1 72% ( 81.0 x 88.0 x 48.0 mm ) Tolerance ±0.5 mm All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : A_1 update : 94.08.25 AC-DC Switching Power Supply ATC DN SERIES MECHANICAL DIMENSION 10 Watts ( Top View ) BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 PIN# SINGLE Dual 1 AC IN (L) AC IN (L) 2 DO NOT CONNECT DO NOT CONNECT 3 AC IN (N) AC IN (N) 4 DO NOT CONNECT DO NOT CONNECT 5 FG FG 6 -DC OUT -DC OUT 7 DO NOT CONNECT COMMON 8 +DC OUT +DC OUT DERATING -3-