August 12, 2009 GATE DRIVE TRANSFORMER SM76924 ELECTRICAL SPECIFICATIONS AT 25C TURNS RATIO (1-3) : (4-6) OCL @100kHz, 0.1V (1-3) OCL @100kHz, 0.1V (4-6) LEAKAGE INDUCTANCE @ 100kHz, 0.1V, (1-3) Short (4-6) DCR (1-3), (4-6) POLARITY HIPOT (4-6) TO (1-3) ET OPERATING TEMPERATURE 1 : 1 2% 370H 20% 370H 20% 1.1H TYP 1.00 MAX 1, 4 SAME PHASE 1500 VDC, 6 sec 19.5 VµS -40 C TO +130 C 1 4 3 6 Schematic MECHANICAL OUTLINE .050 1,27 6X, .024 0,61 4X, .073 1,85 4 3 5 2 6 1 .200 5,05 .073 1,85 .060 1,52 .157 4,00 SM76924 .330 MAX 8,38 .248 MAX 6,30 Notes: 1. All dimensions are in inches/mm 2. Unless otherwise specified, tolerance is ± .010/0,25 3. Coplanarity is 0.004/0,102 4. For non-RoHS parts replace the SM prefix with 42- (e.g. SM76924 becomes 42-76924) 5. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020D DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel 951-928-7700, FAX 951-928-7701 Email: [email protected] 499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.