RB075B40S Diodes Schottky barrier diode RB075B40S zDimensions (Unit : mm) zApplications General rectification zLand size figure (Unit : mm) 6.0 2.3±0.2 0.1 6.5±0.2 6.0 0.5±0.1 C0.5 5.1±0.2 0.1 9.5±0.5 5.5±0.3 0.1 （1） 0.75 0.65±0.1 （2） （3） CPD 2.5 0.8 min ① 0.9 zConstruction Silicon epitaxial 1.6 1.6 3.0 2.0 1.5±0.3 zFeatures 1) Power mold type. (CPD) 2) Low IR 3) High reliability 2.3±0.2 2.3±0.2 2.3 2.3 zStructure 0.5±0.1 1.0±0.2 ROHM : CPD JEITA : SC-63 ① Manufacture Date zTaping specifications (Unit : mm) 2.0±0.05 φ1.55±0.1 0 8.0±0.1 0.4±0.1 zAbsolute maximum ratings (Ta=25°C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current（*1） Forward current surge peak （60Hz・1cyc） Junction temperature Storage temperature Limits 40 40 5 45 150 -40 to +150 Symbol VRM VR Io IFSM Tj Tstg (*1)Business frequencies,Rating of R-load,Tc=125℃ MAX 10.1±0.1 7.5±0.05 10.1±0.1 φ3.0±0.1 8.0±0.1 0～0.5 6.8±0.1 13.5±0.2 TL 16.0±0.2 2.5±0.1 4.0±0.1 2.7±0.2 Unit V V A A ℃ ℃ zElectrical characteristic (Ta=25°C) Parameter Forward voltage Symbol VF Min. - Typ. - Max. 0.75 Unit V Reverse current IR - - 5.0 µA Conditions IF=5.0A VR=40V 1/3 RB075B40S Diodes zElectrical characteristic curves 10 Ta=150℃ 1000000 Ta=125℃ 10000 条件：f=1MHz f=1MHz Ta=25℃ 0.1 Ta=-25℃ Ta=75℃ 10000 0.01 1000 Ta=25℃ 100 10 Ta=-25℃ 1 200 300 400 500 600 700 700 690 680 670 AVE:413.6mV AVE:675.8mV 660 5 10 15 20 25 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 800 700 600 500 400 300 AVE:89.7nA 200 1cyc 8.3ms 150 100 620 610 600 590 580 AVE:586.9pF 570 560 0 550 IR DISPERSION MAP AVE:130.0A 50 RESERVE RECOVERY TIME:trr(ns) 200 630 100 Ct DISPERSION MAP 30 Ifsm 1000 Ta=25℃ IF=0.5A IR=1A Irr=0.25*IR n=10pcs 25 20 15 AVE:15.2ns 10 5 0 Ifsm 8.3ms 8.3ms 1cyc 100 10 0 1 trr DISPERSION MAP IFSM DISPERSION MAP t 100 10 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 D=1/2 Rth(j-a) Rth(j-c) 10 Mounted on epoxy board 1 0.1 0.001 IM=100mA 1ms IF=1A FORWARD POWER DISSIPATION:Pf(W) TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 15 100 1000 30 Ta=25℃ f=1MHz VR=0V n=10pcs 640 Ta=25℃ VR=40V n=30pcs VF DISPERSION MAP 300 10 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 650 900 650 250 0 30 1000 REVERSE CURRENT:IR(uA) Ta=2 Ta=25℃ 5℃ IF=5A IF=3 n=30pcs 100 10 0 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 100 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS FORWARD VOLTAGE:VF(mV) 1000 0.1 0 PEAK SURGE FORWARD CURRENT:IFSM(A) CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=75℃ PEAK SURGE FORWARD CURRENT:IFSM(A) FORWARD CURRENT:IF(A) Ta=125℃ 1 REVERSE CURRENT:IR(nA) 100000 Ta=150℃ DC 10 Sin(θ＝180) 5 time 300us 0.01 0.1 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 1000 0 0 5 10 15 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS 20 2/3 RB075B40S Diodes Sin(θ＝180) 0.02 D=1/2 DC 0.01 0 0A 0V 15 t D=1/2 DC T VR D=t/T VR=20V Tj=150℃ 10 5 Sin(θ＝180) 10 20 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS 30 15 Io t T DC VR D=t/T VR=20V Tj=150℃ 10 D=1/2 5 Sin(θ＝180) 0 0 0 0A 0V Io AVERAGE RECTIFIED FORWARD CURRENT:Io(A) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) REVERSE POWER DISSIPATION:PR (W) 20 20 0.03 0 25 50 75 100 125 AMBIENT TEMPERATURE:Ta(℃) Derating Curveﾞ(Io-Ta) 150 0 25 50 75 100 125 150 CASE TEMPARATURE:Tc(℃) Derating Curveﾞ(Io-Tc) 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0