40 dB Gain, 0.8 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1012 PE15A1012 is a wideband low noise RF coaxial power amplifier operating in the 10 MHz to 1 GHz frequency range. The amplifier offers 0.8 dB typical noise figure, 18 dBm of P1dB and 40 dB small signal gain with the excellent gain flatness of ±1 dB. This exceptional technical performance is achieved through the use of hybrid MIC design and advanced GaAs PHEMT devices. The low noise amplifier requires typically a +12V DC power supply. The connectorized SMA module is unconditionally stable and includes built-in voltage regulation, bias sequencing, and reverse bias protection for added reliability. The amplifier operates over the temperature range of -40°C and +85°C. Features • • • • • • 10 MHz to 1 GHz Frequency Range P1dB: 18 dBm Flat Small Signal Gain: 40 dB Gain Flatness: ±1 dB Noise Figure: 0.8dB typ Reverse Isolation: 55 dB • • • • • 50 Ohm Input and Output Matched -40 to 85°C Operating Temperature Unconditionally Stable Regulated Supply & Bias Sequencing Overvoltage Protection Applications • • • • • • Laboratory Applications R&D Labs Military Radio Radar Systems Telecom Infrastructure Test Instrumentation • • • • • • Military & Space Communication Systems Wireless Communication Microwave Radio Systems Cellular Base Stations Low Noise Amplifier • • • • • • General Purpose Amplification General Purpose Wireless Wideband Gain Block IF Amplifier/RF Driver Amplifier RF Wideband Front Ends RF Pre-amplification Electrical Specifications (TA = +25°C, DC Voltage = 12Volts, DC Current = 110mA) Description MinimumTypical Maximum Units Frequency Range 10 Small Signal Gain 37 Gain Flatness Gain Variance at OTR* 1,000 MHz 40 42 dB ±1 ±1.25 dB ±1.25 dB Output at 1 dB Compression Point +16 +18 dBm Output at 1 dB Compression Point +16 +18 dBm Noise Figure (50 MHz to 1,000 MHz) 0.8 1 Input VSWR 1.45:1 1.65:1 Output VSWR 1.3:1 1.5:1 Reverse Isolation 50 55 Operating DC Voltage 10 12 Operating DC Current 100 110 Operating Temperature Range -40 dB dB 15 Volts 125 mA +85 °C . . Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 0.8 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA PE15A1012 PE15A1012 REV 1.0 1 40 dB Gain, 0.8 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1012 *OTR= Base Plate Operating Temperature Range Absolute Maximum Rating Parameter Rating Units Source Voltage +15 Volts RF input Power +13 dBm Operating Temperature (base-plate) -40 to +85 °C Storage Temperature -55 to +125 °C ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. . Mechanical Specifications Size Length Width Height 1.5 in [38.1 mm] 0.85 in [21.59 mm] 0.375 in [9.53 mm] Input Connector Output Connector SMA Female SMA Female . Environmental Specifications Temperature Operating Range Storage Range -40 to +85 deg C -55 to +125 deg C . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Plotted and Other Data Notes: • Values at +25 °C, sea level • ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 0.8 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA PE15A1012 PE15A1012 REV 1.0 2 40 dB Gain, 0.8 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1012 Typical Performance Data dB Gain, Input Return Loss and Output Return Loss 50 40 30 Gain(dB) 25 C 20 IN_Return Loss(dB) 10 OUT_Return Loss(dB) 0 -10 -20 -30 -40 Freq.(MHz) dB Noise Figure 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 Noise Figure 0.2 0 Freq.(MHz) Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 0.8 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA PE15A1012 PE15A1012 REV 1.0 3 40 dB Gain, 0.8 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1012 40 dB Gain, 0.8 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 0.8 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA PE15A1012 URL: http://www.pasternack.com/40-db-gain-1000-mhz-low-noise-high-gain-amplifier-sma-pe15a1012-p.aspx PE15A1012 REV 1.0 4 PE15A1012 CAD Drawing 40 dB Gain, 0.8 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA PE15A1012 REV 1.0 5