40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA TECHNICAL DATA SHEET PE15A1028 PE15A1028 is a wideband low noise RF coaxial power amplifier operating in the 1.2 GHz to 1.6 GHz frequency range. The amplifier offers 0.7 dB noise figure typical, 12 dBm of P1dB and 40 dB small signal gain with gain flatness of ±1.0 dB. The low noise amplifier requires typically a +12V DC power supply and is unconditionally stable. The amplifier operates over the temperature range of -40°C and +85°C. Features • • • • • 1.2 GHz to 1.6 GHz Frequency Range Noise Figure: 0.7 dB typ P1dB: 12 dBm Flat Small Signal Gain: 40 dB Gain Flatness: ±1 .0 dB • • • • • 50 Ohm Input and Output Matched -40 to 85°C Operating Temperature Unconditionally Stable Single DC Positive Supply Built-in Voltage Regulator Applications • • • • Laboratory Applications R&D Labs Radar Systems Telecom Infrastructure • • • • Test Instrumentation Military & Space Communication Systems Microwave Radio Systems • • • • Satellite Communications Low Noise Amplifier General Purpose Amplification Gain Block Electrical Specifications (TA = +25°C, DC Voltage = 12Volts,) Description MinimumTypical Maximum Units Frequency Range 1.2 Small Signal Gain 40 Gain Flatness 1.6 ±1 GHz dB dB Output at 1 dB Compression Point +12 dBm Noise Figure 0.7 dB Input VSWR 2:1 Output VSWR 2:1 Operating DC Voltage 11 Operating Temperature Range -40 12 13 Volts +85 °C . . Mechanical Specifications Size Length Width Height 1.5 in [38.1 mm] 0.85 in [21.59 mm] 0.375 in [9.53 mm] Input Connector Output Connector SMA Female SMA Female . Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA PE15A1028 PE15A1028 REV 1.0 1 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA TECHNICAL DATA SHEET PE15A1028 Environmental Specifications Temperature Operating Range Storage Range -40 to +85 deg C -55 to +125 deg C . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Plotted and Other Data Notes: • Values at +25 °C, sea level • ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA PE15A1028 PE15A1028 REV 1.0 2 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA TECHNICAL DATA SHEET PE15A1028 Typical Performance Data dB Gain, Input Return Loss and Output Return Loss 50.0 40.0 Gain(dB) 25 C 30.0 IN_Return Loss(dB) 20.0 OUT_Return Loss(dB) 10.0 0.0 -10.0 -20.0 -30.0 Freq.(MHz) dB Noise Figure 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 Noise Figure 0.20 0.00 Freq.(MHz) Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA PE15A1028 PE15A1028 REV 1.0 3 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA TECHNICAL DATA SHEET PE15A1028 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA PE15A1028 URL: http://www.pasternack.com/40-db-gain-0.7-db-1.6-ghz-low-noise-amplifier-sma-pe15a1028-p.aspx PE15A1028 REV 1.0 4 PE15A1028 CAD Drawing 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA PE15A1028 REV 1.0 5