23 dBm IP3, 1.6 dB NF, 13 dBm P1dB, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA TECHNICAL DATA SHEET PE15A1008 PE15A1008 is a wideband low noise RF coaxial power amplifier operating in the 20 MHz to 3 GHz frequency range. The amplifier offers 1.6 dB typical noise figure, 13 dBm of P1dB and 25 dB small signal gain with the excellent gain flatness of ±0.75 dB max. This exceptional technical performance is achieved through the use of hybrid MIC design and advanced GaAs PHEMT devices. The low noise amplifier requires typically a +12V DC power supply. The connectorized SMA module is unconditionally stable and includes built-in voltage regulation. This low noise amplifier requires only a single positive supply, is unconditionally stable and operates over the temperature range of -40°C and +85°C. Features • • • • • • 20 MHz to 3 GHz Frequency Range P1dB: 13 dBm Flat Small Signal Gain: 25 dB Gain Flatness: ±0.75 dB Output IP3: 23 dBm Noise Figure: 1.6 dB typ • • • • • • Reverse Isolation: 50 dB 50 Ohm Input and Output Matched -40 to 85°C Operating Temperature Unconditionally Stable Single DC Positive Supply Built-in Voltage Regulator Applications • • • • • • Laboratory Applications R&D Labs Military Radio Radar Systems Telecom Infrastructure Test Instrumentation • • • • • • Military & Space Communication Systems Wireless Communication Microwave Radio Systems Cellular Base Stations Low Noise Amplifier • • • • • • General Purpose Amplification General Purpose Wireless Wideband Gain Block IF Amplifier/RF Driver Amplifier RF Wideband Front Ends RF Pre-amplification Electrical Specifications (TA = +25°C, DC Voltage = 12Volts, DC Current = 75mA) Description MinimumTypical Maximum Units Frequency Range 0.02 3 Small Signal Gain 22.5 GHz 25 27 dB Gain Flatness ±0.75 ±1 dB Gain Variance at OTR* ±1.25 dB Output at 1 dB Compression Point +12 +13 dBm Output at 1 dB Compression Point +12 +13 dBm Output 3rd Intercept Point +20 +23 dBm Noise Figure (40 MHz to 3 GHz) 1.6 Input VSWR 1.5:1 1.8:1 Output VSWR 1.5:1 1.8:1 Reverse Isolation 40 1.9 50 dB dB Spurious -60 dBc Operating DC Voltage 15 Volts 120 mA +85 °C 10 12 Operating DC Current 65 75 Operating Temperature Range -40 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 23 dBm IP3, 1.6 dB NF, 13 dBm P1dB, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA PE15A1008 PE15A1008 REV 1.0 1 23 dBm IP3, 1.6 dB NF, 13 dBm P1dB, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA TECHNICAL DATA SHEET PE15A1008 . . *OTR= Base Plate Operating Temperature Range Absolute Maximum Rating Parameter Rating Units Source Voltage +15 Volts RF input Power +10 dBm Operating Temperature (base-plate) -55 to +125 °C Storage Temperature -40 to +85 °C ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. . Mechanical Specifications Size Length Width Height 1.5 in [38.1 mm] 0.85 in [21.59 mm] 0.375 in [9.53 mm] Input Connector Output Connector SMA Female SMA Female . Environmental Specifications Temperature Operating Range Storage Range -40 to +85 deg C -55 to +125 deg C . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Plotted and Other Data Notes: • Values at +25 °C, sea level • ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 23 dBm IP3, 1.6 dB NF, 13 dBm P1dB, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA PE15A1008 PE15A1008 REV 1.0 2 23 dBm IP3, 1.6 dB NF, 13 dBm P1dB, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA TECHNICAL DATA SHEET PE15A1008 Typical Performance Data dB Gain, Input Return Loss and Output Return Loss 30 20 Gain(dB) 25 C 10 IN_Return Loss(dB) 0 OUT_Return Loss(dB) -10 -20 -30 -40 Freq.(MHz) dB Noise Figure 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 Noise Figure 0.2 0 Freq.(MHz) Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 23 dBm IP3, 1.6 dB NF, 13 dBm P1dB, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA PE15A1008 PE15A1008 REV 1.0 3 23 dBm IP3, 1.6 dB NF, 13 dBm P1dB, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA TECHNICAL DATA SHEET PE15A1008 23 dBm IP3, 1.6 dB NF, 13 dBm P1dB, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 23 dBm IP3, 1.6 dB NF, 13 dBm P1dB, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA PE15A1008 URL: http://www.pasternack.com/1.6-db-3-ghz-low-noise-amplifier-25-db-gain-sma-pe15a1008-p.aspx PE15A1008 REV 1.0 4 PE15A1008 CAD Drawing 23 dBm IP3, 1.6 dB NF, 13 dBm P1dB, 20 MHz to 3 GHz, Low Noise Amplifier, 25 dB Gain, SMA PE15A1008 REV 1.0 5