50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1013 PE15A1013 is a wideband low noise RF coaxial power amplifier operating in the 10 MHz to 1 GHz frequency range. The amplifier offers 1 dB typical noise figure, 18 dBm of P1dB and 50 dB small signal gain with gain flatness of ±1.25 dB. This exceptional technical performance is achieved through the use of hybrid MIC design and advanced GaAs PHEMT devices. The low noise amplifier requires typically a +12V DC power supply. The connectorized SMA module is unconditionally stable and includes built-in voltage regulation, bias sequencing, and reverse bias protection for added reliability. The amplifier operates over the temperature range of -40°C and +85°C. Features • • • • • • 10 MHz to 1 GHz Frequency Range P1dB: 18 dBm Flat Small Signal Gain: 50 dB Gain Flatness: ±1 .25 dB Gain Variance over OTR: ±1 .5 dB Noise Figure: 1 dB typ • • • • • • Reverse Isolation: 65 dB 50 Ohm Input and Output Matched -40 to 85°C Operating Temperature Unconditionally Stable Single DC Positive Supply Built-in Voltage Regulator Applications • • • • • • Laboratory Applications R&D Labs Military Radio Radar Systems Telecom Infrastructure Test Instrumentation • • • • • • Military & Space Communication Systems Wireless Communication Microwave Radio Systems Cellular Base Stations Low Noise Amplifier • • • • • • General Purpose Amplification General Purpose Wireless Wideband Gain Block IF Amplifier/RF Driver Amplifier RF Wideband Front Ends RF Pre-amplification Electrical Specifications (TA = +25°C, DC Voltage = 12Volts, DC Current = 130mA) Description MinimumTypical Maximum Units Frequency Range 10 Small Signal Gain 47 1,000 MHz 50 54 dB Gain Flatness ±1.25 ±1.5 dB Gain Variance at OTR* ±1.5 dB Output at 1 dB Compression Point +16 +18 dBm Output at 1 dB Compression Point +16 +18 dBm Output 3rd Intercept Point +26 +28 dBm Noise Figure (50 MHz to 1,000 MHz) 1 Input VSWR 1.5:1 1.7:1 Output VSWR 1.6:1 1.8:1 Reverse Isolation 60 1.1 65 dB dB Spurious -60 dBc Operating DC Voltage 10 12 15 Volts Operating DC Current 100 130 160 mA Operating Temperature Range -40 +85 °C Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA PE15A1013 PE15A1013 REV 1.0 1 50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1013 . . *OTR= Base Plate Operating Temperature Range Absolute Maximum Rating Parameter Rating Units Source Voltage +15 Volts RF input Power +13 dBm Operating Temperature (base-plate) -55 to +125 °C Storage Temperature -40 to +85 °C ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. . Mechanical Specifications Size Length Width Height 1.5 in [38.1 mm] 0.85 in [21.59 mm] 0.375 in [9.53 mm] Input Connector Output Connector SMA Female SMA Female . Environmental Specifications Temperature Operating Range Storage Range -40 to +85 deg C -55 to +125 deg C . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Plotted and Other Data Notes: • Values at +25 °C, sea level • ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA PE15A1013 PE15A1013 REV 1.0 2 50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1013 Typical Performance Data dB Gain, Input Return Loss and Output Return Loss 60 50 40 Gain(dB) 25 C 30 IN_Return Loss(dB) 20 OUT_Return Loss(dB) 10 0 -10 -20 -30 -40 Freq.(MHz) dB Noise Figure 2 1.8 1.6 1.4 1.2 1 0.8 0.6 Noise Figure 0.4 0.2 10 40 70 100 130 160 190 220 250 280 310 340 370 400 430 460 490 520 550 580 610 640 670 700 730 760 790 820 850 880 910 940 970 1000 0 Freq.(MHz) Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA PE15A1013 PE15A1013 REV 1.0 3 50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1013 50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA PE15A1013 URL: http://www.pasternack.com/50-db-gain-1000-mhz-low-noise-high-gain-amplifier-sma-pe15a1013-p.aspx PE15A1013 REV 1.0 4 PE15A1013 CAD Drawing 50 dB Gain, 28 dBm IP3, 1 dB NF, 18 dBm P1dB, 10 MHz to 1,000 MHz, Low Noise High Gain Amplifier SMA PE15A1013 REV 1.0 5