Seoul Semiconductor

Z-Power LED
X10490
Technical
Data
Sheet
RoHS
Preliminary
Specification
Acrich2 – 8.7W
SMJC-2V08W2P4 (120V)
SMJC-3V08W2P4 (220V)
Rev. 00
APRIL 2013
1
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
Acrich2 - 8.7W
Acrich2
Features
Description
The Acrich2 series of products are designed to be driven directly off of AC
• Connect using a AIC
directly to AC power
• High Power Efficiency
• High Power Factor
• Low THD
• Long Life Time
• Simplest BOM
• Miniaturization
• Lead Free product
• RoHS compliant
line voltage, therefore they do not need the standard converter essential
for conventional general lighting products.
The converter or driver found in most general lighting products can limit
Applications
the overall life of the product, but with the Acrich2 series of products the
• Candle light
• Pendant
life of the product can more closely be estimated from the LED itself.
This will also allow for a much smaller form factor from an overall fixture
design allowing for higher creativity in the fixture.
The modules have a high power factor which can contribute to a higher
energy savings in the end application.
Rev. 00
APRIL 2013
2
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
[ Contents ]
1.
Characteristics
2.
Thermal Resistance
3.
Color spectrum
4.
Power characteristics
5.
Radiation pattern
6.
Binning Structure
7.
Part List
8.
Outline dimensions
9.
Circuit Drawing
10. Cautions for use
11. Handling of silicone resin for LEDs
12. Handling with regards to static electricity
13. Storage before use
14. Guidelines for properly working with Acrich2
Rev. 00
APRIL 2013
3
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
1. Characteristics
1-1. Electro-Optical characteristics of Acrich2 8.7W
Value
Parameter
Luminous Flux [2]
Correlated Color
Temperature [4]
Symbol
ФV [3]
Mark
Unit
Min
Typ
Max
-
580
670
B
5300
5600
6000
C
4700
5000
5300
G
2900
3000
3200
H
2600
2700
2900
80
-
-
lm
CCT
CRI
Ra
Operating Voltage [5]
v opt
K
-
120
V[RMS]
220
Power Dissipation
PD
8.0
8.7
9.3
W
Operating Frequency
Freq
50 / 60
Hz
Power Factor
PF
Over 0.97
-
View Angle
2Θ 1/2
120
deg.
Raged
Voltage
Value
Unit
120V
140
220V
264
1-2. Absolute Maximum Ratings
Parameter
Symbol
Max. Voltage
v opt
V[RMS]
Power Dissipation
Pd
11.5
W
Operating Temperature
Topr
-30 ~ 85
ºC
Storage Temperature
Tstg
-40 ~ 100
ºC
ESD Sensitivity
-
±4,000V HBM
-
Rev. 00
APRIL 2013
4
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
* Notes :
[1] At 120V and 220V RMS, Ta=25℃
[2] Acrich2 series maintain the tolerance of 10% on flux and power measurements.
[3] ФV is the total luminous flux output measured with an integrated sphere.
[4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram.
[5] Operating Voltage doesn't indicate the maximum voltage which customers use but means
tolerable voltage according to each country’s voltage variation rate.
It is recommended that the solder pad temperature should be below 70℃.
Rev. 00
APRIL 2013
5
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
2. Thermal Resistance
Part
Package Power
Dissipation [W]
Maximum Junction
Temp[℃]
Rθj-s
[℃/W]
Acrich2 LED
SAW8WA2A Max 1.55
125
23
Acrich2 IC
Max 1.0
150
11.25
The Acrich2 LED has a thermal resistance of 27℃/W from junction of the LED to the LED lead.
The maximum junction temperature of the Acrich2 LED package is 125℃, therefore the maximum
lead temperature Ts_max is
Ts_max = Tj_max - (Rqj-s * PD)
= 125℃ - (23℃/W * 1.55W) = 89.35℃
Although this is the maximum lead temperature, it is recommended to keep the lead temperature
under 70℃
The Acrich2 IC has a 16.4degC/W thermal resistance from junction to the top surface.
The maximum junction temperature (Tt_max) of the IC is 125℃, therefore the maximum
temperature of the top of the IC is
Tt_max = Tj_max - (yj-t * PD)
= 125℃ - (11.25℃/W * 1.0W) = 138.75℃
Rev. 00
APRIL 2013
6
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
3. Color spectrum
Relative Spectral Power Distribution at Ta=25oC – G. H
Relative Spectral Power
Distribution
1.2
1
0.8
0.6
0.4
0.2
0
300
400
500
600
700
800
700
800
Wavelength[nm]
Relative Spectral Power Distribution at Ta=25oC – B, C
Relative Spectral Power
Distribution
1.2
1
0.8
0.6
0.4
0.2
0
300
400
500
600
Wavelength[nm]
Rev. 00
APRIL 2013
7
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
4. Power characteristic
Relative Power Distribution vs. Voltage at Ta=25oC
1.6
Relative Power
Distribution
1.4
1.2
1
0.8
0.6
0.4
0.2
0
100
110
120
130
Voltage[V]
140
150
160
200
210
220
230
Voltage[V]
240
250
260
1.4
Relative Power
Distribution
1.2
1
0.8
0.6
0.4
0.2
0
Rev. 00
APRIL 2013
8
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
Relative Luminous flux vs. Forward Voltage, Ta=25oC
Relative Luminous Flux [a.u.]
1.6
1.4
1.2
1
0.8
0.6
100
110
120
130
140
150
160
240
250
260
Voltage[RMS,V]
Relative Luminous Flux [a.u.]
1.6
1.4
1.2
1
0.8
0.6
200
210
220
230
Voltage[RMS,V]
Rev. 00
APRIL 2013
9
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
5. Radiation Pattern
Rev. 00
APRIL 2013
10
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
6. Color & Binning
0.44
2600K
2700K
2900K
3000K
H1
H0
3200K
0.42
G1
CIE Y
G0
H3
H2
G3
G2
0.40
H4
H5
G5
G4
0.38
ANSI-Color Bin
0.40
0.42
0.44
0.46
0.48
CIE X
▷ COLOR RANK
Bin code
G0
G3
H0
H3
X
Y
0.4299
0.4165
0.4248
0.4048
0.4374
0.4093
0.4430
Bin code
X
Y
0.4430
0.4212
X
Y
0.4248
0.4048
0.4374
0.4093
0.4499
0.4138
0.4198
0.3931
0.4317
0.3973
0.4212
0.4562
0.4260
0.4374
0.4093
0.4374
0.4093
0.4198
0.3931
0.4317
0.3973
0.4317
0.3973
0.4147
0.3814
0.4259
0.3853
0.4436
0.4015
0.4259
0.3853
0.4373
0.3893
0.4499
0.4562
0.4138
0.4317
0.3973
0.4436
0.4015
0.4260
0.4687
0.4289
0.4499
0.4138
0.4499
0.4138
0.4620
0.4166
0.4436
0.4015
0.4620
0.4166
0.4740
0.4194
0.4551
0.4042
0.4687
0.4289
0.4810
0.4319
0.4620
0.4166
0.4620
0.4166
0.4436
0.4015
0.4551
0.4042
0.4551
0.4042
0.4373
0.3893
0.4483
0.3919
0.4666
0.4069
0.4483
0.3919
0.4593
0.3944
0.4740
0.4194
0.4551
0.4042
0.4666
0.4069
G1
G4
H1
H4
* Measurement Uncertainty of the Color Coordinates : ± 0.01
Bin code
G2
G5
H2
H5
Rev. 00
APRIL 2013
11
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
0.38
4700K
5000K
C1
CIE Y
5300K
C0
0.36
5600K
B1
C2
C5
6000K
B0
0.34
B2
B3
C3
C4
B5
B4
ANSI-Color Bin
0.32
0.32
0.34
0.36
CIE X
▷ COLOR RANK
Bin code
B0
B3
C0
C3
X
Y
0.3207
0.3462
0.3212
0.3389
0.3293
0.3461
0.3292
Bin code
X
Y
0.3292
0.3539
X
Y
0.3212
0.3389
0.3293
0.3461
0.3217
0.3316
0.3373
0.3534
0.3293
0.3384
0.3539
0.3376
0.3616
0.3293
0.3461
0.3293
0.3461
0.3217
0.3316
0.3293
0.3384
0.3293
0.3384
0.3369
0.3451
0.3222
0.3243
0.3294
0.3306
0.3294
0.3306
0.3366
0.3369
0.3373
0.3534
0.3293
0.3384
0.3369
0.3451
0.3376
0.3616
0.3463
0.3687
0.3373
0.3534
0.3373
0.3534
0.3456
0.3601
0.3369
0.3451
0.3456
0.3601
0.3539
0.3669
0.3448
0.3514
0.3463
0.3687
0.3552
0.3760
0.3456
0.3601
0.3456
0.3601
0.3369
0.3451
0.3448
0.3514
0.3448
0.3514
0.3366
0.3369
0.3440
0.3428
0.3526
0.3578
0.3440
0.3428
0.3514
0.3487
0.3539
0.3669
0.3448
0.3514
0.3526
0.3578
B1
B4
C1
C4
* Measurement Uncertainty of the Color Coordinates : ± 0.01
Bin code
B2
B5
C2
C5
Rev. 00
APRIL 2013
12
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
7. Part list
NO.
Item
Silk
Specification
Q’ty
1
LED
-
SAW8WA2A
8
2
IC
IC
DT3001B
1
3
Resistor
R2
1608size 1K Ohm 1%
1
4
Resistor
R1
1608size 1.6K Ohm 1% (120V)
1
1608size 820 Ohm 1% (220V )
5
Metal PCB
-
AL5052, 25.3*35.9mm, 1.6T
1
8. Outline dimensions
* Notes :
[1] All dimensions are in millimeters. (Tolerance : ±0.2)
13
[2] Scale : none
Rev. 00
APRIL 2013
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
9. Circuit Drawing
SMJE-2V08W2P4 (120V)
SMJE-3V04W2P4 (220V)
Rev. 00
APRIL 2013
14
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
10. Cautions for use
• Please review the Acrich2 Application Note for proper protective
circuitry usage
• Please note, Acrich2 products run off of high voltage, therefore caution should be
taken when working near Acrich2 products.
• DO NOT touch any of the circuit board, components or terminals with body or
metal while circuit is active.
• Please do not add or change wires while Acrich2 circuit is active
• Long time exposure to sunlight or UV can cause the lens to discolor.
• Please do not use adhesives to attach the LED that outgas organic vapor.
• Please do not use together with the materials containing Sulfur.
• Please do not assemble in conditions of high moisture and/or oxidizing gas such
as Cl, H2S,NH3,SO2,NOX,etc.
• Please do not make any modification on module.
• Please be cautious when soldering to board so as not to create a short between
different trace patterns.
11. Handling of silicone resin for LEDs
•
•
•
•
•
•
Acrich2 series is encapsulated with silicone resin for high optical efficiency.
Please do not touch the silicone resin area with sharp objects such as
pincette(tweezers).
Finger prints on silicone resin area may affect the performance.
Please store LEDs in covered containers to prevent dust accumulation as this
may affect performance.
Excessive force more than 3000gf to the silicone lens can result in fatal or
permanent damage with LEDs.
Please do not cover the silicone resin area with any other resins such as
epoxy, urethane, etc.
Rev. 00
APRIL 2013
15
www.Acrich.com
Z-Power LED
X10490
Technical
Data
Sheet
12. Handling with regards to static electricity
• The Acrich2 products use an integrated circuit (IC) which can be damaged when
exposed to static electricity. Please handle using equipment that prevents static
electricity. Do not touch unless ESD protection is used.
• The Acrich2 product should also not be installed in end equipment without
ESD protection.
13. Storage before use
• Do not impact or place pressure on this product because even a small amount of
pressure can damage the product. The product should also not be placed in high
temperatures, high humidity or direct sunlight since the device is sensitive to
these conditions.
• When storing devices for a long period of time before usage, please following
these guidelines:
* The devices should be stored in the anti-static bag that it was shipped in from
Seoul-Semiconductor with opening.
* If the anti-static bag has been opened, re-seal preventing air and moisture from
being present in the bag.
14. Guidelines for properly working with Acrich2
• Discharge the lighting system a minimum of 2-3 times prior to working with
the module.
• Use only properly rated test equipment and tools for the rated voltage and current
of the product being tested.
• It is strongly suggested to wear rubber insulated gloves and rubber bottom shoes.
• Do not wear any conductive items (such as jewelry) which could accidentally contact
electric circuits.
• Perform several tests with power off and the lighting system unplugged.
• Faults, lightning, or switching transients can cause voltage surges in excess of the
normal ratings.
• Internal component failure can cause excessive voltages.
• Stored or residual electricity in long wire could be hazardous.
• Make sure proper discharge prior to starting work.
Rev. 00
APRIL 2013
16
www.Acrich.com