Z-Power LED X10490 Technical Data Sheet RoHS Specification Acrich2 – MR 100V 4.3W SMJP-1V04W1P1 SSC Drawn Approval Customer Approval Rev. 01 June 2012 1 www.Acrich.com Z-Power LED X10490 Technical Data Sheet Acrich2 Acrich2 - 100V 4.3W MR Features Description The Acrich 2 series, which are designed for AC drive(or • Connect using a AIC directly to AC power • High Power Efficiency • High Power Factor • Low THD • Long Life Time • Simplest BOM • Miniaturization • Lead Free product • RoHS compliant operation), do not need the standard converter essential for a conventional general lighting product. The modules also have a high power factor which can contribute to high energy savings in many lighting applications. Applications Since there is no need for a converter, the Acrich 2 series life- • • • • time can be estimated Bulb light Down light Factory Ceiling light Industrial Light closer to the LED because it is not as dependent on the other electronics in the system. It also allows for better utilization of space without the converter. * The appearance and specifications of the product can be changed for improvement without notice. Rev. 01 June 2012 2 www.Acrich.com Z-Power LED X10490 Technical Data Sheet [ Contents ] 1. Characteristics ----------------------------4 2. Therm al Resistance ----------------------6 3. Color spectrum------------------------------7 4. Power characteristics --------------------7 5. Radiat ion p att ern-------------------------8 6. C o l o r & B i n n i n g - ----------- ------------- -9 7. Marking-------------------------------------11 8. Outline dimensions------------------------11 9. Circuit Drawing---------------------12 10. P a c k i n g - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 3 11. U s a g e p r e c a u t i o n s---------- ------ ------14 12. Handling of silicone resin for LEDs-------14 13. Handling with regards to static electricity--15 14. S t o r a g e b e f o r e u s e - - - - - - - - - - - - - - - - - 1 5 Rev. 01 June 2012 3 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 1. Characteristics 1-1-1. Electro-Optical characteristics of SMJP-1V04W1P1-G rank Parameter Value Symbol Unit Min Typ Max ФV [3] 220 245 - lm Correlated Color Temperature [4] CCT 2900 3000 3200 K CRI Ra 80 - - - Luminous Flux [2] Operating Voltage [5] vopt 100 Power Dissipation PD Operating Frequency Freq 50 / 60 Hz Power Factor PF Over 0.95 - 120 deg. View Angle 2 4.0 Θ 1/2 4.3 V[RMS] 4.6 W 1-1-2. Electro-Optical characteristics of SMJP-1V04W1P1-H rank Parameter Value Symbol Unit Min Typ Max ФV [3] 220 245 - lm Correlated Color Temperature [4] CCT 2600 2700 2900 K CRI Ra 80 - - - Luminous Flux [2] Operating Voltage [5] vopt 100 4.0 4.3 V[RMS] 4.6 W Power Dissipation PD Operating Frequency Freq 50 / 60 Hz Power Factor PF Over 0.95 - 120 deg. View Angle 2 Θ 1/2 Rev. 01 June 2012 4 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 1-2 Absolute Maximum Ratings Parameter Symbol Value Unit Max. Voltage vopt 120 V[RMS] Power Dissipation Pd 5.7 W Operating Temperature Topr -30 ~ 85 ºC Storage Temperature Tstg -40 ~ 100 ºC ESD Sensitivity - ± 4,000V HBM - * Notes : [1] At 100V RMS, Ta=25ºC [2] Acrich 2 series maintain the tolerance of ±10% on flux and power measurements. [3] V is the total luminous flux output measured with an integrated sphere. [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. [5] Operating Voltage doesn't indicate the maximum voltage which customers use but means tolerable voltage according to each country’s voltage variation rate. It is recommended that the solder pad temperature should be below 70 . Ф ℃ Rev. 01 June 2012 5 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 2. Thermal Resistance Part Package power dissipation [W] Maximum Junction Temp[ ] Acrich2 LED AZ4 Max. 1.2 125 5.7 Acrich2 IC Max. 1.2 125 16.4 ℃ Rθ θj-S [ ℃/W] The Acrich2 LED has a thermal resistance of 27degC/W from junction to the LED lead. The maximum junction temperature of Acrich2 LED package is 125degC, therefore the maximum lead temperature Ts_max is Ts_max = Tj_max - (Rθj-s * PD) = 125 ℃ - (5.7℃/W * 1.2W) = 118.2℃ Although this is the maximum lead temperature, it is recommended to keep the lead temperature under 70degC The Acrich2 IC has a 16.4degC/W thermal resistance from junction to the top surface. The maximum junction temperature (Tt_max) of the IC is 125degC, therefore the maximum temperature of the top of the IC is Tt_max = Tj_max - (ψj-t * PD) = 125 ℃ - (16.4℃/W * 1.2W) = 105.3℃ Rev. 01 June 2012 6 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 3. Color spectrum 4. Power characteristic Rev. 01 June 2012 7 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 5. Radiation Pattern 0 1.0 30 Relative luminous flux 0.8 0.6 60 0.4 0.2 0.0 -80 -60 -40 -20 0 90 Angle(deg.) Rev. 01 June 2012 8 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 6. Color & Binning 0.46 2700K 0.44 3000K 0.40 4700K CIE Y 5000K 0.38 C1 B9 6000K 6500K 7000K 7600K 8200K 0.30 Z1 A0 A2 A1 A3 A5 B0 B3 C4 B2 B5 H6 H7 G7 G6 F7 F6 E7 D5 C3 E6 D4 B1 C2 G4 F4 E5 E4 D2 C0 B8 0.34 E2 D3 G5 F5 E3 H5 H4 F3 F2 H3 H2 G3 G2 E1 D1 D0 C8 G0 F1 F0 E8 E0 D8 C9 5300K 5600K 0.36 4200K 4500K D9 G1 F8 E9 H1 H0 F9 3700K 4000K G9 G8 3500K 0.42 H9 H8 3200K 0.32 2600K 2900K D7 C5 D6 C7 C6 ANSI-Color Bin B4 B7 B6 A4 A7 Z3 A6 A9 Z2 Z5 Z4 Z7 A8 Z6 Z9 Z8 0.28 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 CIE X *Notes : For more detailed information on Acrich binning see the “Acrich Binning and Labeling” document at www.Acrich.com * Measurement Uncertainty of the Color Coordinates : ± 0.01 Rev. 01 June 2012 9 www.Acrich.com Z-Power LED X10490 Technical Data Sheet ▷ COLOR RANK Rev. 01 June 2012 10 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 7. Marking YYMMDD: Production Date XXXX – LED PKG Flux Rank / Color Bin Rank 8. Outline dimensions * Notes : [1] All dimensions are in millimeters. (Tolerance : ± 0.2) [2] Scale : none [3] The appearance and specifications of the product may be changed for improvement without notice Rev. 01 June 2012 11 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 9. Circuit Drawing 1 2 DN2 N1 VAC1 1 D1 Acrich U1 DN1 N VP 3 D2 Acrich 4 DN4 1 VAC2 L1 DN3 5 D3 Acrich 6 7 L D4 Acrich Rev. 01 June 2012 12 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 10. Packing < 1Box : 100 PCS per tray x Max.10 layer = Max.1000 PCS about 6kg < Box size( L x W x H ) = 590 x 330 x 260 Rev. 01 June 2012 13 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 11. Usage precautions • Please review the Acrich2 Module Application Note for protective circuitry component usage. • Please note, the Acrich products run on high voltage so use caution when near the the device which the circuit is active. • DO NOT touch any of the circuit board, components or terminals with body or metal while circuit is active. • Please do not add or change wires while Acrich circuit is active • The appearance and specifications of the product may be modified for improvement without notice. • Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. • Please do not use adhesives to attach the LED that outgas organic vapor. • Please do not use together with the materials containing Sulfur • Please do not assemble under the condition of moisture and oxidizing gas in the air(Cl, H2S,NH3,SO2,NOX,etc) 12. Handling of silicone resin for LEDs • • Acrich series is encapsulated with silicone resin for high optical efficiency. Please do not touch the silicone resin area with sharp objects such as pincette(tweezers). • Finger prints on silicone resin area may affect the performance. • Please store LEDs in covered containers as it is dust sensitive. • Excessive force more than 3000gf to the silicone lens can result in fatal or permanent damage with LEDs. • Please do not cover the silicone resin area with any other resins such as epoxy, urethane, etc. Rev. 01 June 2012 14 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 13. Handling with regards to static electricity • The Acrich2 modules use an integrated circuit (IC) which can be damaged when exposed to static electricity. Please handle using equipment that prevents static electricity. Do not touch unless ESD protection is used. • The Acrich2 modules should also not be installed in end equipment with out ESD protection. 14. Storage before use • Do not impact or place pressure on this product because even a small amount of pressure can damage the product. The product should also not be placed in high temperatures, high humidity or direct sunlight since the device is sensitive to these conditions. (1) Please, confirm the lists below, when storing it in a long term. * It should be stored in the anti-static bag that Seoul-Semiconductor packed without opening it. * If you opened it in order to prevent humidity, you should seal it and not let the air and humidity into the bag. Rev. 01 June 2012 15 www.Acrich.com