Z-Power LED X10490 Technical Data Sheet RoHS Preliminary Specification Acrich2 - 16W SMJD-2V16W2P4 (120V) SMJD-3V16W2P4 (220V) SSC Development Drawn Checked Approval SSC QC Customer Approval Approval Rev. 00 APRIL 2013 1 www.Acrich.com Z-Power LED X10490 Technical Data Sheet Acrich2 - 16W Acrich2 Features Description The Acrich2 series of products are designed to be driven directly off of AC • Connect using a AIC directly to AC power • High Power Efficiency • High Power Factor • Low THD • Long Life Time • Simplest BOM • Miniaturization • Lead Free product • RoHS compliant line voltage, therefore they do not need the standard converter essential for conventional general lighting products. The converter or driver found in most general lighting products can limit Applications the overall life of the product, but with the Acrich2 series of products the • Down light life of the product can more closely be estimated from the LED itself. This will also allow for a much smaller form factor from an overall fixture design allowing for higher creativity in the fixture. The modules have a high power factor which can contribute to a higher energy savings in the end application. Rev. 00 APRIL 2013 2 www.Acrich.com Z-Power LED X10490 Technical Data Sheet [ Contents ] 1. Characteristics 2. Thermal Resistance 3. Color spectrum 4. Power characteristics 5. Radiation pattern 6. Binning Structure 7. Marking 8. Part List 9. Outline dimensions 10. Circuit Drawing 11. Packing 12. Box labeling 13. Cautions for use 14. Handling of silicone resin for LEDs 15. Handling with regards to static electricity 16. Storage before use 17. Guidelines for properly working with Acrich2 Rev. 00 APRIL 2013 3 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 1. Characteristics 1-1. Electro-Optical characteristics of Acrich2 16W Value Parameter Luminous Flux [2] Correlated Color Temperature [4] Symbol ФV [3] Mark Unit Min Typ Max - 1070 1260 B 5300 5600 6000 C 4700 5000 5300 G 2900 3000 3200 H 2600 2700 2900 80 - - lm CCT CRI Ra Operating Voltage [5] v opt K - 120 V[RMS] 220 Power Dissipation PD 15.3 Operating Frequency Freq 50 / 60 Hz Power Factor PF Over 0.97 - View Angle 2Θ 1/2 120 deg. Tolerance of Surge [6] Vs 500 16 - 16.7 W - V 1-2. Absolute Maximum Ratings Parameter Symbol Max. Voltage v opt Raged Voltage Value 120V 140 220V 264 Unit V[RMS] Power Dissipation Pd 23 W Operating Temperature Topr -30 ~ 85 ºC Storage Temperature Tstg -40 ~ 100 ºC ESD Sensitivity - ±4,000V HBM - Rev. 00 APRIL 2013 4 www.Acrich.com Z-Power LED X10490 Technical Data Sheet * Notes : [1] At 120V and 220V RMS, Ta=25℃ [2] Acrich2 series maintain the tolerance of 10% on flux and power measurements. [3] ФV is the total luminous flux output measured with an integrated sphere. [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. [5] Operating Voltage doesn't indicate the maximum voltage which customers use but means tolerable voltage according to each country’s voltage variation rate. It is recommended that the solder pad temperature should be below 70℃. [6] It means surge voltage of product that can withstand. Surge value followed by the standard of IEC61000-4-5. Rev. 00 APRIL 2013 5 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 2. Thermal Resistance Part Package Power Dissipation [W] Maximum Junction Temp[℃] Rθj-s [℃/W] Acrich2 LED SAW8WA2A Max 1.55 125 23 Acrich2 IC Max 1.0 150 11.25 The Acrich2 LED has a thermal resistance of 23℃/W from junction of the LED to the LED lead. The maximum junction temperature of the Acrich2 LED package is 125℃, therefore the maximum lead temperature Ts_max is Ts_max = Tj_max - (Rqj-s * PD) = 125℃ - (23℃/W * 1.55W) = 89.35℃ Although this is the maximum lead temperature, it is recommended to keep the lead temperature under 70℃ The Acrich2 IC has a 16.4degC/W thermal resistance from junction to the top surface. The maximum junction temperature (Tt_max) of the IC is 125℃, therefore the maximum temperature of the top of the IC is Tt_max = Tj_max - (yj-t * PD) = 125℃ - (11.25℃/W * 1.0W) = 138.75℃ Rev. 00 APRIL 2013 6 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 3. Color spectrum Relative Spectral Power Distribution at Ta=25oC –G, H Relative Spectral Power Distribution 1.2 1 0.8 0.6 0.4 0.2 0 300 400 500 600 700 800 700 800 Wavelength[nm] Relative Spectral Power Distribution at Ta=25oC - B, C Relative Spectral Power Distribution 1.2 1 0.8 0.6 0.4 0.2 0 300 400 500 600 Wavelength[nm] Rev. 00 APRIL 2013 7 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 4. Power characteristic Relative Power Distribution vs. Voltage at Ta=25oC 1.6 Relative Power Distribution 1.4 1.2 1 0.8 0.6 0.4 0.2 0 100 110 120 130 Voltage[V] 140 150 160 200 210 220 230 Voltage[V] 240 250 260 1.4 Relative Power Distribution 1.2 1 0.8 0.6 0.4 0.2 0 Rev. 00 APRIL 2013 8 www.Acrich.com Z-Power LED X10490 Technical Data Sheet Relative Luminous flux vs. Forward Voltage, Ta=25oC Relative Luminous Flux [a.u.] 1.6 1.4 1.2 1 0.8 0.6 100 110 120 130 140 150 160 240 250 260 Voltage[RMS,V] Relative Luminous Flux [a.u.] 1.6 1.4 1.2 1 0.8 0.6 200 210 220 230 Voltage[RMS,V] Rev. 00 APRIL 2013 9 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 5. Radiation Pattern Rev. 00 APRIL 2013 10 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 6. Color & Binning 0.44 2600K 2700K 2900K 3000K H1 H0 3200K 0.42 G1 CIE Y G0 H3 H2 G3 G2 0.40 H4 H5 G5 G4 0.38 ANSI-Color Bin 0.40 0.42 0.44 0.46 0.48 CIE X ▷ COLOR RANK Bin code G0 G3 H0 H3 X Y 0.4299 0.4165 0.4248 0.4048 0.4374 0.4093 0.4430 Bin code X Y 0.4430 0.4212 X Y 0.4248 0.4048 0.4374 0.4093 0.4499 0.4138 0.4198 0.3931 0.4317 0.3973 0.4212 0.4562 0.4260 0.4374 0.4093 0.4374 0.4093 0.4198 0.3931 0.4317 0.3973 0.4317 0.3973 0.4147 0.3814 0.4259 0.3853 0.4436 0.4015 0.4259 0.3853 0.4373 0.3893 0.4499 0.4562 0.4138 0.4317 0.3973 0.4436 0.4015 0.4260 0.4687 0.4289 0.4499 0.4138 0.4499 0.4138 0.4620 0.4166 0.4436 0.4015 0.4620 0.4166 0.4740 0.4194 0.4551 0.4042 0.4687 0.4289 0.4810 0.4319 0.4620 0.4166 0.4620 0.4166 0.4436 0.4015 0.4551 0.4042 0.4551 0.4042 0.4373 0.3893 0.4483 0.3919 0.4666 0.4069 0.4483 0.3919 0.4593 0.3944 0.4740 0.4194 0.4551 0.4042 0.4666 0.4069 G1 G4 H1 H4 * Measurement Uncertainty of the Color Coordinates : ± 0.01 Bin code G2 G5 H2 H5 Rev. 00 APRIL 2013 11 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 0.38 4700K 5000K C1 CIE Y 5300K C0 0.36 5600K B1 C2 C5 6000K B0 0.34 B2 B3 C3 C4 B5 B4 ANSI-Color Bin 0.32 0.32 0.34 0.36 CIE X ▷ COLOR RANK Bin code B0 B3 C0 C3 X Y 0.3207 0.3462 0.3212 0.3389 0.3293 0.3461 0.3292 Bin code X Y 0.3292 0.3539 X Y 0.3212 0.3389 0.3293 0.3461 0.3217 0.3316 0.3373 0.3534 0.3293 0.3384 0.3539 0.3376 0.3616 0.3293 0.3461 0.3293 0.3461 0.3217 0.3316 0.3293 0.3384 0.3293 0.3384 0.3369 0.3451 0.3222 0.3243 0.3294 0.3306 0.3294 0.3306 0.3366 0.3369 0.3373 0.3534 0.3293 0.3384 0.3369 0.3451 0.3376 0.3616 0.3463 0.3687 0.3373 0.3534 0.3373 0.3534 0.3456 0.3601 0.3369 0.3451 0.3456 0.3601 0.3539 0.3669 0.3448 0.3514 0.3463 0.3687 0.3552 0.3760 0.3456 0.3601 0.3456 0.3601 0.3369 0.3451 0.3448 0.3514 0.3448 0.3514 0.3366 0.3369 0.3440 0.3428 0.3526 0.3578 0.3440 0.3428 0.3514 0.3487 0.3539 0.3669 0.3448 0.3514 0.3526 0.3578 B1 B4 C1 C4 * Measurement Uncertainty of the Color Coordinates : ± 0.01 Bin code B2 B5 C2 C5 Rev. 00 APRIL 2013 12 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 7. Marking XX00 : CCT - H rank : 2700 - G rank : 3000 - C rank : 5000 - B rank : 5600 XXXXXX : (Production date) Year/Month/date aaa : LED PKG Flux rank bb : Color bin XX00 XXXXXX aaabb Rev. 00 APRIL 2013 13 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 8. Part list NO. Item Silk Specification Unit Q’ty 1 LED - SAW8WA2A EA 16 2 IC IC DT3001B EA 1 3 Resistor Rbld 1608size 1K Ohm 1% EA 1 4 Resistor Rset EA 1 1608size 3.6K Ohm 1% (120V) 1608size 1.6K Ohm 1% (220V ) 5 Resistor R1, R2 6432size 91 Ohm 5% EA 2 6 TVS T1 P6SMB440A 440Vdc EA 1 7 Bridge Diode BD1 MB6S 600V 1A EA 1 8 Fuse F1 443 series 250V 1A EA 1 9 Varistor VR1 8S17SM251S 250Vac/330Vdc EA 1 10 Metal PCB - AL5052, Ø62, 1.6t EA 1 Rev. 00 APRIL 2013 14 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 9. Outline dimensions * Notes : [1] All dimensions are in millimeters. (Tolerance : ±0.2) [2] Scale : none Rev. 00 APRIL 2013 15 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 10. Circuit Drawing SMJD-2V16W2P4 (120V) SMJD-3V16W2P4 (220V) Rev. 00 APRIL 2013 16 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 11. Packing 1. Tray information 4. Box information & packing • 15pcs LED module packed per tray 2. Tray stack and taping 50ea Trays with LED module Taping • 300 EA module per BOX 1EA • 12 LED module trays and additional 2 dummy trays up and down (2 EA) of box • Add silica gel (1 EA) on top of the tray 3. Sealing packing Dielectric sealing pack (700x700) ** 1Box : 15 PCS per tray x 20 tray = 300ea about 5kg Rev. 00 APRIL 2013 17 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 12. Box labeling Model No. SMJD-XV16W2P4 1) Rank XXXXX 2) Type Quantity XX Date YYYY.MM.DD SEOUL SEMICONDUCTOR CO.,LTD. Note. 1) The model Number designation is explained as follow SMJD-XV16W2P4 Where SMJE : SSC internal code XV : Operating Voltage (2V = 120V / 3V = 220V) 16W : About Power Consumption 2 : Acrich IC Version P4: MJT PKG (SAW8WA2A) 2) It represents the LED PKG rank that consists of five characters. 3) It is attached to the top left corner of the box. TOTAL Quantity XX SEOUL SEMICONDUCTOR CO.,LTD. Rev. 00 18 Note. 1) It is attached to the bottom right corner of the box APRIL 2013 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 13. Usage precautions • Please review the Acrich2 Module Application Note for protective circuitry component usage. • Please note, the Acrich products run on high voltage so use caution when near the the device which the circuit is active. • DO NOT touch any of the circuit board, components or terminals with body or metal while circuit is active. • Please do not add or change wires while Acrich circuit is active • Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. • Please do not use adhesives to attach the LED that outgas organic vapor. • Please do not use together with the materials containing Sulfur • Please do not assemble under the condition of moisture and oxidizing gas in the air(Cl, H2S,NH3,SO2,NOX,etc) • Please do not make any modification on module. • Please be cautious as soldering in order to avoid short between different patterns. 14. Handling of silicone resin for LEDs • • Acrich series is encapsulated with silicone resin for high optical efficiency. Please do not touch the silicone resin area with sharp objects such as pincette(tweezers). • Finger prints on silicone resin area may affect the performance. • Please store LEDs in covered containers as it is dust sensitive. • Excessive force more than 3000gf to the silicone lens can result in fatal or permanent damage with LEDs. • Please do not cover the silicone resin area with any other resins such as epoxy, urethane, etc. Rev. 00 APRIL 2013 19 www.Acrich.com Z-Power LED X10490 Technical Data Sheet 15. Handling with regards to static electricity • The Acrich2 modules use an integrated circuit (IC) which can be damaged when exposed to static electricity. Please handle using equipment that prevents static electricity. Do not touch unless ESD protection is used. • The Acrich2 modules should also not be installed in end equipment with out ESD protection. 16. Storage before use • Do not impact or place pressure on this product because even a small amount of pressure can damage the product. The product should also not be placed in high temperatures, high humidity or direct sunlight since the device is sensitive to these conditions. (1) Please, confirm the lists below, when storing it in a long term. * It should be stored in the anti-static bag that Seoul-Semiconductor packed without opening it. * If you opened it in order to prevent humidity, you should seal it and not let the air and humidity into the bag. 17. Guidelines for Acrich module work • Discharge the lighting system minimum 2~3 times prior to starting work. • Use only the tested instruments, and insulated tools rated for the voltage and current specified. • Wear rubber made gloves and rubber bottom shoes or sneakers. • Do not wear any conductive items (such as jewelry) which could accidentally contact electric circuits. • Perform several tests with power off and the lighting system unplugged. • Faults, lightning, or switching transients can cause voltage surges in excess of the normal ratings. • Internal component failure can cause excessive voltages. • Stored or residual electricity in long wire could be hazardous. Make sure proper discharge prior to starting work. Rev. 00 APRIL 2013 20 www.Acrich.com