LL04ED-BDxxL Data Sheet For EDIXEON Multi-Color and Single-Color LEDs Features: • High efficiency • Available in 3 beam Patterns • Optimized for uniform effects • Lens without Housing Typical applications : • Stage Lighting • Street Lights • Decorative Light • Architectural Lighting • Down Light Table of Contents General Information................................................................................................................................................................................. 2 General Specifications............................................................................................................................................................................. 2 Optical Specifications.............................................................................................................................................................................. 3 Mechanical Specifications...................................................................................................................................................................... 4 Illumination charts.................................................................................................................................................................................... 5 Package Specifications........................................................................................................................................................................... 6 Product Nomenclature........................................................................................................................................................................... 7 www.ledlink-optics.com General Information • Compatible Led Type : The L L 0 4 E D - B D x x L 4 in 1 lenses are optimized for both Multi-Color R.G.B E d i s o n LEDs and Single-Color Edison LEDs (Edixeon 1LA5 White) from Edison Opto. (1) • Beam Angle Type : An optimized profile integrate different front shape enable the generation of three different lens models : smallest beam(15deg);medium beam (25deg);biggest beam (40deg). (2) • The Way to Assembly : The Lens should be assembled to the PCB board or MCPCB upon LEDs which provides the most appropriate related position, so as to achieve the best uniform results * Manually installation or if necessary thermal glue are recommended. • Function : L L 0 4 E D - B D x x L provides exceptional color mixing result with the highest efficiency through careful engineering and precision manufacturing process. • Lens Material Optical Grade PMMA PC • Operating Temperature range -40˚C ~ + 70˚C (upper limit +80˚C) • Storage Temperature range -40˚C ~ + 70˚C (upper limit +80˚C) *Average transmittance in visible spectrum 400nm~700nm> 90% Notes: (1) Edixeon 1LA5 is a trademark of Edison,Inc , for technical information on LEDs, please refer to Edison,Inc, http://www.edison-opto.com.tw/ (2) Typical beam divergence will be affected by different color of LEDs. Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. www.ledlink-optics.com Optical Specifications [ Typical beam Angle and intensity (cd/lm) of LL04 lenses ] • Edixeon 1LA5 LED Typical Cone Angle (degree)(3) with Edixeon 1LA5 Part Number Red LEDs Green LEDs Blue LEDs LL04ED-BD15L 18 19 17 LL04ED-BD25L 27 30 28 LL04ED-BD40L 42 42 38 The typical cone angle measures where the luminous intensity is 90% of the peak value of intensity.This typical cone varies with LED color due to different chip size and chip position tolerance. Typical on axis intensity (cd/4w)(4) with Edixeon 1LA5 Part Number Red LEDs Green LEDs Blue LEDs LL04ED-BD15L 2000 6640 440 LL04ED-BD25L 960 3600 224 LL04ED-BD40L 680 1860 100 Luminous intensity depends on the flux binning and tolerance of the LEDs. Please refer to the LEDs data sheet for more details on Flux binning and mechanical tolerance. • Edixeon 1LA5 LED Typical Cone Angle (degree)(3) with Edixeon 1LA5 Part Number White LEDs Warm white LEDs LL04ED-BD15L 25 26 LL04ED-BD25L 37 35 LL04ED-BD40L 48 45 The typical cone angle the full angle measured where the luminous intensity is 90% of the peak value of intensity. That typical cone varies with LED color due to different chip size and chip position tolerance. Typical on axis intensity (cd/4w)(4) with Edixeon 1LA5 Part Number White LEDs Warm white LEDs LL04ED-BD15L 3840 1560 LL04ED-BD25L 2600 1160 LL04ED-BD40L 1480 820 Luminous intensity depends on the flux binning and tolerance of the LEDs. Please refer to the LEDs data sheet for more detail on Flux binning and mechanical tolerance Notes: (3) The typical divergence will be changed by different color, chip size and chip position tolerance.The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. (4) The efficiency value listed above is the total value of the whole lens model, the value depends on the total flux of the LED used. Luminous intensity depends on the LEDs flux and its tolerances, for more details of LED flux, please check Edixeon data sheet athttp://www.edison-opto.com.tw/ Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. www.ledlink-optics.com • Usage and Maintenance : 1. If necessary, clean lenses with mild soap, water and soft cloth 2. Never use any commercial cleaning solvents on lenses, like alcohol 3. Please handle or install lenses with wearing gloves, skin oils may damage lens or its optical characteristic. 1. Lens + Leds+MCPCB assembly instruction 3. Lens dimensions and Top Views: Ø4 9.70±0.1 8.00±0.1 1.50±0.1 3. ± 0. 00 ± 5. 90 Ø2 Lens 1 0. 1 Edixeon 1LA5 LED PCB Board 2. View assembly lens with MCPCB: 1 Notes: (1) All dimensions are in mm. (2) Drawing not to scale. (3) Collimator material is PMMA. Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. www.ledlink-optics.com Illumination charts *Edixeon 4 in 1 white LED: Edixeon 1LA5 LL04ED-BD15L LL04ED-BD25L 1. Beam Pattern 1. Beam Pattern 2. Light Distribution Curve 2. Light Distribution Curve 100 100 80 80 60 60 40 40 20 20 0 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 3. Illuminance 0 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 3. Illuminance 45.1 x 1m 30.5 x 1m 10.4 x 2m 9.0 x 2m 3m 4.0 x 3m 6.0 x Notes: The Flux of Edixeon 1LA5 LED is 85 lm Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. www.ledlink-optics.com Illumination charts *Edixeon 4 in 1 white LED: Edixeon 1LA5 LL04ED-BD40L 1. Beam Pattern 2. Light Distribution Curve 100 80 60 40 20 0 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 3. Illuminance 17.4 x 1m 4.2 x 2m 2.0 x 3m Notes: The Flux of Edixeon 1LA5 LED is 85 lm Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. www.ledlink-optics.com Package Item Quantity Total Size (long*width* high) Tray 25 25pcs 34*30*3.5 cm Inner box 10tray/box 250pcs 35*31*21 cm Outer box 2 Inner box/outer box 500pcs 64.7*36.5*24 cm 25pcs/tray 250pcs/inner box ITEM NO.: QTY: G.W.: N.W.: MEAS: KGS KGS 500pcs/outer box Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. www.ledlink-optics.com Product Nomenclature X6:Type L:Lens X7: Assemblies M: Lens+Housing X8:Housing Color 1: Black 2: White 3:Clear LL 04 ED- BD xx L - M x X1 X2 X3 X4 X5 X6 X7 X8 The material number has no this part without housing. X5:Lens Angle 8,10,15,15*50 ,25,30,40,45,60,70,80,25*45 X4:Serial Number AA,AB,AC,AD,AE,AF,AG,AH X3:Led Type ED:Edixeon CR:CREE OSRAM:OS LUXEON:LU X2:Lens Q’ty 01,02,03,04,06,07,09,12,24,36 X1:Lens Item Ledlink Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.