LL06ED-ADxxL DATA SHEET FOR EDISON 1LA5

LL06ED-ADxxL Data Sheet
For EDIXEON Multi-Color and Single-Color LEDs
Features:
• High efficiency
• Available in 4 beam Patterns
• Optimized for uniform effects
• Lens without Housing
Typical applications :
• Stage Lighting
• Street Lights
• Decorative Light
• Architectural Lighting
• Down Light
Table of Contents
General Information................................................................................................................................................................................. 2
General Specifications............................................................................................................................................................................. 2
Optical Specifications.............................................................................................................................................................................. 3
Mechanical Specifications...................................................................................................................................................................... 4
Illumination charts.................................................................................................................................................................................... 5
Package Specifications........................................................................................................................................................................... 6
Product Nomenclature........................................................................................................................................................................... 7
www.ledlink-optics.com
General Information
• Compatible Led Type :
The L L 0 6 E D - A D x x L 6 in 1 lenses are optimized for both Multi-Color R.G.B E d i s o n LEDs and
Single-Color Edison LEDs (Edixeon 1LA5 White) from Edison Opto.
(1)
• Beam Angle Type :
An optimized profile integrate different front shape enable the generation of four different
lens models : smallest beam(08deg);medium beam (25~40deg);biggest beam(60deg).(2)
• The Way to Assembly :
The Lens should be assembled to the PCB board or MCPCB upon LEDs which provides the most
appropriate related position, so as to achieve the best uniform results
* Manually installation or if necessary thermal glue are recommended.
• Function :
L L 0 6 E D - A D x x L provides exceptional color mixing result with the highest efficiency through
careful engineering and precision manufacturing process.
• Lens Material
Optical Grade PMMA PC
• Operating Temperature range
-40˚C ~ + 70˚C (upper limit +80˚C)
• Storage Temperature range
-40˚C ~ + 70˚C (upper limit +80˚C)
*Average transmittance in visible spectrum 400nm~700nm> 90%
Notes:
(1) Edixeon 1LA5 is a trademark of Edison,Inc , for technical information on LEDs, please refer to Edison,Inc, http://www.edison-opto.com.tw/
(2) Typical beam divergence will be affected by different color of LEDs.
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.
www.ledlink-optics.com
Optical Specifications [ Typical beam Angle and intensity (cd/lm) of LL06 lenses ]
• Edixeon 1LA5 LED
Typical Cone Angle (degree)(3) with Edixeon 1LA5
Part Number
Red LEDs
Green LEDs
Blue LEDs
LL06ED-AD08L
17
18
17
LL06ED-AD25L
25
28
31
LL06ED-AD40L
35
35
40
LL06ED-AD60L
60
55
58
The typical cone angle measures where the luminous intensity is 90% of the peak value of intensity.This typical cone varies with
LED color due to different chip size and chip position tolerance.
Typical on axis intensity (cd/6w)(4) with Edixeon 1LA5
Part Number
Red LEDs
Green LEDs
Blue LEDs
LL06ED-AD08L
3840
10080
840
LL06ED-AD25L
1020
2580
210
LL06ED-AD40L
720
1800
120
LL06ED-AD60L
390
1200
90
Luminous intensity depends on the flux binning and tolerance of the LEDs. Please refer to the LEDs data sheet for more details on
Flux binning and mechanical tolerance.
• Edixeon 1LA5 LED
Typical Cone Angle (degree)(3) with Edixeon 1LA5
Part Number
White LEDs
Warm white LEDs
LL06ED-AD08L
22
24
LL06ED-AD25L
34
40
LL06ED-AD40L
36
40
LL06ED-AD60L
46
66
The typical cone angle the full angle measured where the luminous intensity is 90% of the peak value of intensity. That typical
cone varies with LED color due to different chip size and chip position tolerance.
Typical on axis intensity (cd/6w)(4) with Edixeon 1LA5
Part Number
White LEDs
Warm white LEDs
LL06ED-AD08L
4920
2580
LL06ED-AD25L
3480
1440
LL06ED-AD40L
1800
810
LL06ED-AD60L
1200
420
Luminous intensity depends on the flux binning and tolerance of the LEDs. Please refer to the LEDs data sheet for more detail on
Flux binning and mechanical tolerance
Notes:
(3) The typical divergence will be changed by different color, chip size and chip position tolerance.The typical total divergence is the full angle measured where the
luminous intensity is half of the peak value.
(4) The efficiency value listed above is the total value of the whole lens model, the value depends on the total flux of the LED used. Luminous intensity depends on
the LEDs flux and its tolerances, for more details of LED flux, please check Edixeon data sheet athttp://www.edison-opto.com.tw/
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.
www.ledlink-optics.com
• Usage and Maintenance :
1. If necessary, clean lenses with mild soap, water and soft cloth
2. Never use any commercial cleaning solvents on lenses, like alcohol
3. Please handle or install lenses with wearing gloves, skin oils may damage lens or its optical characteristic.
1. Lens + Leds+MCPCB assembly instruction
3. Lens dimensions and Top Views:
Lens
15
15
10
10
15
10
Edixeon 1LA5 LED
PCB Board
2. View assembly lens with MCPCB:
1
Notes:
(1) All dimensions are in mm.
(2) Drawing not to scale.
(3) Collimator material is PMMA.
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.
www.ledlink-optics.com
Illumination charts
*Edixeon 6 in 1 white LED: Edixeon 1LA5
LL06ED-AD08L
LL06ED-AD25L
1. Beam Pattern
1. Beam Pattern
2. Light Distribution Curve
2. Light Distribution Curve
100
100
80
80
60
60
40
40
20
20
0
-90 -75 -60 -45 -30 -15 0
15 30 45 60 75 90
3. Illuminance
0
-90 -75 -60 -45 -30 -15 0
15 30 45 60 75 90
3. Illuminance
57.9 x
1m
40.9 x
1m
15.5 x
2m
8.5 x
2m
5.6 x
3m
3.5 x
Notes: The Flux of Edixeon 1LA5 LED is 85 lm
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.
3m
www.ledlink-optics.com
Illumination charts
*Edixeon 6 in 1 white LED: Edixeon 1LA5
LL06ED-AD40L
LL06ED-AD60L
1. Beam Pattern
1. Beam Pattern
2. Light Distribution Curve
2. Light Distribution Curve
100
100
80
80
60
60
40
40
20
20
0
-90 -75 -60 -45 -30 -15 0
15 30 45 60 75 90
3. Illuminance
0
-90 -75 -60 -45 -30 -15 0
15 30 45 60 75 90
3. Illuminance
21.2 x
1m
14.1 x
1m
4.9 x
2m
2.8 x
2m
2.1 x
3m
1.4 x
3m
Notes: The Flux of Edixeon 1LA5 LED is 85 lm
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.
www.ledlink-optics.com
Package
Item
Quantity
Total
Size (long*width* high)
Tray
16
16pcs
34*30*3.5 cm
Inner box
10tray/box
160pcs
35*31*21 cm
Outer box
2 Inner box/outer box
320pcs
64.7*36.5*24 cm
16pcs/tray
160pcs/inner box
ITEM NO.:
QTY:
G.W.:
N.W.:
MEAS:
KGS
KGS
320pcs/outer box
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.
www.ledlink-optics.com
Product Nomenclature
X6:Type
L:Lens
X7: Assemblies
M: Lens+Housing
X8:Housing Color
1: Black
2: White
3:Clear
LL 06 ED- AD xx L - M x
X1
X2
X3
X4
X5
X6
X7
X8
The material number
has no this part without
housing.
X5:Lens Angle
8,10,15,15*50 ,25,30,40,45,60,70,80,25*45
X4:Serial Number
AA,AB,AC,AD,AE,AF,AG,AH
X3:Led Type
ED:Edixeon CR:CREE OSRAM:OS LUXEON:LU
X2:Lens Q’ty
01,02,03,04,06,07,09,12,24,36
X1:Lens Item
Ledlink
Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.