LL01CR-DGxxL-Mx Data Sheet For CREE Multi-Color and Single-Color LEDs Features: • High efficiency • Available in 5 beam Patterns • Optimized for uniform effects • Lens with Housing Typical applications : • Stage Lighting • Street Lights • Decorative Light • Architectural Lighting • Down Light Table of Contents General Information................................................................................................................................................................................. 2 General Specifications............................................................................................................................................................................. 2 Optical Specifications.............................................................................................................................................................................. 3 Mechanical Specifications...................................................................................................................................................................... 4 Illumination charts.................................................................................................................................................................................... 5 Package Specifications........................................................................................................................................................................... 6 Product Nomenclature........................................................................................................................................................................... 7 www.ledlink-optics.com General Information • Compatible Led Type : The L L 0 1 C R - D G x x L - M x Single lens are optimized for both Multi-Color R.G.B CREE LEDs and Single-Color Cree LEDs (Cree MC-E White)from Cree Opto. (1) • Beam Angle Type : An optimized profile integrate different front shape enable the generation of five different lens models : smallset beam(20deg),medium beam (30-40deg),biggest beam(50-60deg)(2) • The Way to Assembly : The Lens should be assembled to the PCB board or MCPCB upon LEDs which provides the most appropriate related position, so as to achieve the best uniform results * Manually installation or if necessary thermal glue are recommended. • Function : L L 0 1 C R - D G x x L - M x provides exceptional color mixing result with the highest efficiency through careful engineering and precision manufacturing process. *Lens holders are available in Black, white and clear. • Lens Material Optical Grade PMMA PC • Operating Temperature range -40˚C ~ + 70˚C (upper limit +80˚C) • Storage Temperature range -40˚C ~ + 70˚C (upper limit +80˚C) *Average transmittance in visible spectrum 400nm~700nm> 90% Notes: (1) Cree MC-E is a trademark of Cree,Inc , for technical information on LEDs, please refer to Cree,Inc, www.cree.com/xlamp. (2) Typical beam divergence will be affected by different color of LEDs. Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. www.ledlink-optics.com Optical Specifications [ Typical beam Angle and intensity (cd/lm) of LL01 lens ] • CREE MC-E LED Typical Cone Angle (degree)(3) with CREE MC-E Part Number Red LEDs Green LEDs Blue LEDs LL01CR-DG20L-M2 -- -- -- LL01CR-DG30L-M2 -- -- -- LL01CR-DG40L-M2 -- -- -- LL01CR-DG50L-M2 -- -- -- LL01CR-DG60L-M2 -- -- -- The typical cone angle measures where the luminous intensity is 90% of the peak value of intensity.This typical cone varies with LED color due to different chip size and chip position tolerance. Typical on axis intensity (cd/w) (4) with CREE MC-E Part Number Red LEDs Green LEDs Blue LEDs LL01CR-DG20L-M2 -- -- -- LL01CR-DG30L-M2 -- -- -- LL01CR-DG40L-M2 -- -- -- LL01CR-DG50L-M2 -- -- -- LL01CR-DG60L-M2 -- -- -- Luminous intensity depends on the flux binning and tolerance of the LEDs. Please refer to the LEDs data sheet for more details on Flux binning and mechanical tolerance. • CREE MC-E LED Typical Cone Angle (degree)(3) with CREE MC-E Part Number White LEDs Warm white LEDs LL01CR-DG20L-M2 28 27 LL01CR-DG30L-M2 32 29 LL01CR-DG40L-M2 43 42 LL01CR-DG50L-M2 46 -- LL01CR-DG60L-M2 65 -- The typical cone angle the full angle measured where the luminous intensity is 90% of the peak value of intensity. That typical cone varies with LED color due to different chip size and chip position tolerance. Typical on axis intensity (cd/w) (4) with CREE MC-E Part Number White LEDs Warm white LEDs LL01CR-DG20L-M2 3100 1900 LL01CR-DG30L-M2 2900 1800 LL01CR-DG40L-M2 1700 910 LL01CR-DG50L-M2 1650 -- LL01CR-DG60L-M2 615 -- Luminous intensity depends on the flux binning and tolerance of the LEDs. Please refer to the LEDs data sheet for more detail on Flux binning and mechanical tolerance Notes: (3) The typical divergence will be changed by different color, chip size and chip position tolerance.The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. (4) The efficiency value listed above is the total value of the whole lens model, the value depends on the total flux of the LED used. Luminous intensity depends on the LEDs flux and its tolerances, for more details of LED flux, please check Cree data sheet at www.cree.com. Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. www.ledlink-optics.com • Usage and Maintenance : 1. If necessary, clean lenses with mild soap, water and soft cloth 2. Never use any commercial cleaning solvents on lenses, like alcohol 3. Please handle or install lenses with wearing gloves, skin oils may damage lens or its optical characteristic. 1. Lens + Leds+MCPCB assembly instruction 3. Lens dimensions and Top Views: ０ ８± ． ２８ １６．６±０．１ １４．６±０．１ ．１ １．０±０．１ Ø ０．１ ．８± ４ ２ Ø Lens ８．７±０．１ Ø７．９±０．１ Holder CREE MC-E LED PCB Board 2. View assembly lens with MCPCB: 4. Lens assembly Dimensions and Top Views : １ ０． ０．１ ．８± ８ ２ Ø ．１ ８±０ Ø２４． ± ．８ １．４±０．１ ０．７０±０．１ 1 ２ Ø３ ０° １５．７０ ±0.1 °± １２０ ３．５±０．１ １８．０±０．１ Notes: (1) All dimensions are in mm. (2) Drawing not to scale. (3) Collimator material is PMMA. Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. ７．５０ ±0.1 １１．００ ±0.1 ６．９０ ±0.1 www.ledlink-optics.com Illumination charts *CREE single white LED: CREE MC-E LL01CR-DG20L-M2 LL01CR-DG30L-M2 1. Beam Pattern 1. Beam Pattern 2. Light Distribution Curve 2. Light Distribution Curve 100 100 80 80 60 60 40 40 20 20 0 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 3. Illuminance 10.2 x 2.3 x 1.3 x 0 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 3. Illuminance 1m 9.7 x 1m 2m 2.2 x 2m 3m 1.2 x Notes: The Flux of CREE MC-E LED is 303 lm Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. 3m www.ledlink-optics.com Illumination charts *CREE single white LED: CREE MC-E LL01CR-DG40L-M2 LL01CR-DG50L-M2 1. Beam Pattern 1. Beam Pattern 2. Light Distribution Curve 2. Light Distribution Curve 100 100 80 80 60 60 40 40 20 20 0 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 3. Illuminance 0 -90 -75 -60 -45 -30 -15 0 15 30 45 60 3. Illuminance 5.6 x 1m 5.4 x 1m 1.3 x 2m 0.8 x 2m 3m 0.3 x 3m 0.7 x Notes: The Flux of CREE MC-E LED is 303 lm Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. 75 90 www.ledlink-optics.com Package *CREE single white LED: CREE MC-E LL01CR-DG60L-M2 1. Beam Pattern 2. Light Distribution Curve 100 80 60 40 20 0 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 3. Illuminance 2.0 x 1m 0.5 x 2m 0.2 x 3m Notes: The Flux of CREE MC-E LED is 303 lm Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. www.ledlink-optics.com Product Nomenclature Item Quantity Total Size (long*width* high) Tray 48 48pcs 34*30*3.5 cm Inner box 10tray/box 480pcs 35*31*21 cm Outer box 2 Inner box/outer box 960pcs 64.7*36.5*24 cm 42pcs/tray 420pcs/inner box ITEM NO.: QTY: G.W.: N.W.: MEAS: KGS KGS 840pcs/outer box Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice. www.ledlink-optics.com X6:Type L:Lens X7: Assemblies M: Lens+Housing X8:Housing Color 1: Black 2: White 3:Clear LL 01 CR- DG xx L - M x X1 X2 X3 X4 X5 X6 X7 X8 The material number has no this part without housing. X5:Lens Angle 8,10,15,15*50 ,25,30,40,45,60,70,80,25*45 X4:Serial Number AA,AB,AC,AD,AE,AF,AG,AH X3:Led Type ED:Edixeon CR:CREE OSRAM:OS LUXEON:LU X2:Lens Q’ty 01,02,03,04,06,07,09,12,24,36 X1:Lens Item Ledlink Copyright © 2008-2009 All rights reserved. The information in this document is subject to change without notice.