9 9 2 6 S e r i e s B r a n c h R a t e d C i rc u i t B re a k e r s – A C Ve r s i o n Circuit Breakers Hydraulic Magnetic Type 9926 Series Double Pole Single pole and double pole versions 120/240 VAC, 50/60 Hz Up to 25A Just 13 mm wide Mounts on 35mm DIN-rail cULus listed according to UL489 CSA C22.2 No. 5.02, CE, VDE Ordering Data Technical Data Voltage Current Type: Single Pole (up to 120 VAC) Current Ratings (amps) Part No. TS 35 0.5 1 2 Description Part No. TS 35 Description 9926251000 9926251001 9926251002 QL-1-13-DM-KM-0.5 QL-1-13-DM-KM-01 QL-1-13-DM-KM-02 0.5 1 2 9926252000 9926252001 9926252002 QL-2-13-DM-KM-0.5 QL-2-13-DM-KM-01 QL-2-13-DM-KM-02 3 9926251003 QL-1-13-DM-KM-03 3 9926252003 QL-2-13-DM-KM-03 4 5 9926251004 9926251005 QL-1-13-DM-KM-04 QL-1-13-DM-KM-05 4 5 9926252004 9926252005 QL-2-13-DM-KM-04 QL-2-13-DM-KM-05 6 9926251006 QL-1-13-DM-KM-06 6 9926252006 QL-2-13-DM-KM-06 7 8 9926251007 9926251008 QL-1-13-DM-KM-07 QL-1-13-DM-KM-08 7 8 9926252007 9926252008 QL-2-13-DM-KM-07 QL-2-13-DM-KM-08 10 13 15 16 20 25 9926251010 9926251013 9926251015 9926251016 9926251020 9926251025 QL-1-13-DM-KM-10 QL-1-13-DM-KM-13 QL-1-13-DM-KM-15 QL-1-13-DM-KM-16 QL-1-13-DM-KM-20 QL-1-13-DM-KM-25 10 13 15 16 20 25 9926252010 9926252013 9926252015 9926252016 9926252020 9926252025 QL-2-13-DM-KM-10 QL-2-13-DM-KM-13 QL-2-13-DM-KM-15 QL-2-13-DM-KM-16 QL-2-13-DM-KM-20 QL-2-13-DM-KM-25 9926 Series AC Version - dimensions in mm (in.) 120/240 VAC, 50/60Hz Operating temperature Wire size* 0.5-15A: -40…+65°C 26 (1.02) 92.8 (3.65) 14AWG min., 10AWG max. Additional trip curves and amp ratings are available upon request. Minutes Tripping Time 0.01 0.01 0.001 0.001 (%) Rated Current 4000 5000 Although the 9926 series uses a magnetic only trip mechanism, CSA testing indicates a trip characteristic similar to thermal magnetic trip mechanisms. No de-rating is required at elevated temperatures. 0.1 2000 2500 3000 0.4 0.1 1500 0.6 1 1000 1.5 1 10 400 500 4 10 1 300 28 1 Ambient Temperature 30°C 10 100 105 125 150 200 125% 150% 200% 400% 600% 800% 1000% minimum 15 8 4 0.7 0.09 0.007 0.005 (sec) 10 Seconds Sample trip characteristics - KM 100 Ambient Temperature 30°C 4000 5000 Trip Curves—Hydraulic Magnetic Type Typical time/current characteristics at 30ºC Operating Characteristics Curve KM Operating Characteristics Curve 1 100 Tripping Time The 9926 circuit breakers do not have provisions for marking tags. A possible solution is to cut the adhesive SchS2 tag rail to length (approximately 20 mm on a single pole unit so the current rating remains visible or approximately 30 mm on a two pole unit). The SchS2 accepts DEK, WS and ESG 8/17 marking tags. The part number for adhesive SchS2 is 1720600000. 1000 1000 *Wire sizes: gauges specified are the minimum allowable as per CSA and UL standards. 9926 Series–AC version Trip Curve 2000 2500 3000 67101961 67101913 9926 Series–AC version Trip Curve 1500 Power lug, 90° Lock-out handle 64.8 (2.55) 1000 67101960 45 (1.77) 400 500 Power lug, straight 5 (0.2) Minutes 67101974 13 (0.51) 32 (1.26) 100 105 130 150 200 Bus-bar end cap, 2 pole 19 (0.75) Seconds 20-25A: 10AWG min. Torque 20 in.-lb Approval cULus listed according to UL489 CSA C22.2 No. 5.02, CE, VDE Accessories Part No. Bus-bar (1 pole, insulated, 1 m) 67101904 Bus-bar (2 pole, insulated, 1 m) 67101972 Bus-bar end cap, 1 pole 67101973 90 57 (2.24) 100MM 10000 mechanical operations 13 (0.51) 28.5 (1.12) Insulation resistance Operating life 66 (2.6) 71.4 (2.81) 0.5A 25A 10,000A 1500V, 50/60Hz 17.9 (0.7) 74 (2.91) minimum maximum Interrupting capacity Dielectric strength maximum 300 (sec) Type: Double Pole (up to 240 VAC) Current Ratings (amps) 300 • • • • • • 9926 Series Single Pole (%) Rated Current Trip Curve 1 applies to the following part numbers where "XX" is the current rating: Single Pole— 99262512XX Double Pole— 99262522XX 53 9926 Series Mounting Options and Accessories Mounting Options 93% 95 ON OFF 95 OF F ON OF F ON 5 N VERT 45 W ON OFF 100% ON VERT D 4 O R 5 N HO IZ DO 4 W 10 ON OF F ON OF F % ON OF F 5% 100% HORIZ 4 5 OFF UP UP It is important to note that in environments that are exposed to a high degree of vibration, the cables that connect to the circuit breaker must be securely held in place, as the breaker is not designed to carry the weight of the cables. A maximum of 35N can be applied to the terminal area, in a direction perpendicular to the mounting axis. % % If the product is not vertically mounted in the normal DIN-rail mounting orientation, a rating factor must be applied. Figure 1 shows a diagram of the rating factor to apply. The published curves for these circuit breaker products are produced with the circuit breaker in the vertical mounting position. The rating factor only applies to the must hold and must trip points of the curve as the other parts (instantaneous trip point) stay largely unaffected. 10 5 107% Accessories Technical Data Current Rating Voltage Short Circuit Strength Part Number Table - Example 80A max. 500V max. 25kA Type Bus bar (1 pole, insulated 1m) Bus bar (2 pole, insulated 1m) Part No. 67101904 67101972 Bus bar (3 pole, insulated 1m) 67101971 To order 9926 Series Single Pole Circuit Breaker Part No. 9926251100 • Current Rating of 1.0 amp • Internal Resistance per Pole of 1.1 ohms • Trip Curve – M1, Medium (Standard) 9 9 2 6 2 5 1 0 0 0 Amperage Type Bus bar end cap, 1 pole Bus bar end cap, 2 pole or 3 pole "00" - 0.5A "01" - 1A "02" - 2A Part No. 67101973 67101974 / "60" - 60A Trip Curves (Types 5-9) "0" - Branch AC KM (Standard) "1" - Branch AC OP (Instantaneous) "2" - Branch AC 1 (Fast) "3" - Supplemental 9 (Slow) "4" - Branch 80VDC 1 (Fast) "5" - Supplemental 2 (Standard) "6" - Branch 125VDC OP (Instantaneous) "7" - Branch 80VDC OP (Instantaneous) "8" - Branch 125VDC U2 (Standard) "9" - Branch 80VDC U2 (Standard) Poles 1 Pole 2 Pole 3 Pole Technical Data Current Rating Wire Size Dimensions Type Power lug, straight Power lug, 90° 85A max. 10 AWG min., 4 AWG max. A: 6 mm B: 32 mm Type "5" - Base Breaker "6" - With Auxiliary Contact "7" - With Trip Alarm Contact "8" - Combo Aux/Trip Contact "9" - GFCI Part No. 67101960 67101961 9 9 2 6 2 4 1 0 0 0 Amperage Type Lock-out handle Part No. 67101913 "00" - 0.5A "01" - 1A "02" - 2A / "60" - 60A Trip Curves (Type 4) "0" - Supplemental 1 (Slow) "1" - Supplemental 3 (Fast) "3" - Branch AC 9 (Slow) Poles 1 Pole 2 Pole 3 Pole Type "4" - Base Breaker 59