UL/DL Series Accessories Type/ Cat No. Description Contacts Type Std Pk H10UL 1 Auxiliary Contact 1NO H11UL 2 Auxiliary Contacts 1NO + 1NC H12UL 3 Auxiliary Contacts 1NO + 2NC H21UL 3 Auxiliary Contacts 2NO + 1NC HLS11L* 1 Auxiliary/1 Signal Contact 1CO + 1CO (Signal) Rated Operating Currents 6 6 6 6 6 10A@240V AC 3A@110V DC 1A@220V DC 1mA @ 24V DC max. 0.8Nm (7 lb.in) Minimum Contact Load Torque Wire Range: Single Wire Stranded Wire Stranded Wire with Ferrule 45 mm Auxiliary Contact, Alarm Switch E335632 17.7 mm US LISTED C.B. ACC. 3NY7 87 mm 52.7 mm 6 mm 63.8 mm 8.8 mm Dimensions HxxUL. 68.4 mm 9 mm 43.8 mm 88 mm 1.0mm² - 2.5mm² (18-14 AWG) 1.0mm² - 1.5mm² (18-16 AWG) 1.0mm² - 1.5mm² (18-16 AWG) Shunt Trip Type/ Cat No. Rated Voltage UN FA12UL FA24UL FA48UL 12V AC/DC 24V AC/DC 48 - 72V AC/DC FA110UL 110 - 240V AC/DC, 277V AC Max. Operating Current @ UN 1.3A 0.6A 0.2A 0.25A @ 110V 0.5A @ 240V 0.58A @ 277V 45 mm C For mounting instructions please refer to page 43. Std Pk 5 5 5 63.8 mm 12.4 mm 6 mm Dimensions HLS11L. 5 21.8 mm ca. 180-200 AWG 23 Undervoltage Trip* Line Voltage VE Std Pk UA120UL 120V AC, 60Hz 5 45 mm Reset-Hold Voltage = 0.85 x VE Drop-Out Voltage = 0.35 ~ 0.7 x VE 45 mm 89.5 mm Type/ Cat No. VE = Rated Voltage Neutral Pole 43.6 mm 68.4 mm 6 mm Type/ Cat No. Rated Current IN Rated Voltage UN Std Pk N32UL N63UL 0.3 - 32A 40 - 63A 480Y/277V AC 240V AC 6 6 51.5mm 37.5mm Cooling Spacer 25.5mm to cover the terminal screw holes on the switching devices, neutral Poles and shunt trips for increased touch protection. BS.UL 100 15.960 1 to connect the auxiliary contact and shunt trip or neutral Pole to the circuit breaker. 14 Lock-out Adapter** Type/ Cat No. Std Pk Type/ Cat No. Std Pk E983419 10 EASS 10 ** UL and DL series can also be locked in the on and off position by simply using a common lead or meter seal, which gets fed through the hole in the handle and a corresponding hole in the housing. 45mm Std Pk 34.5mm Type/ Cat No. 105.3mm Std Pk 7mm 52.5mm Type/ Cat No. 36.8mm 6mm Mounting Screw 34mm * UL Pending Dimensions UA120UL 36.5mm Touch Protection Caps 17.5 mm 17.5mm 8mm 14.5mm 4mm 30.5mm 51.5mm 68.4mm Dimensions NxxUL, FAxxUL For the latest on Altech Circuit Breakers specifications please visit www.altechcorp.com/breaker.