Device connectivity and electronics housings Device connectivity and electronics housings | Powerful compact connector with PUSH IN wire connection Preliminary product data S2C-SMT 3.50/../90 Product data S2C-SMT 3.50/../90G Box IEC: 200 V / 10 A UL: 150 V / 10 A Closed side For additional articles and information, refer to catalog.weidmueller.com 3.6 0.142" L1 P max. 1.5 max. 0.559" max. 1.5 max. 0.559" 2.5 0.098" D max. 1.8 max. 0.071" d 4.1 0.159" 10.8 0.425" 2.5 0.098" 14.2 0.559" L1+4.9 L1+0.193" 0 C Dimensioned drawing L -0.3 High-temperature-resistant male header for side-by-side mounting. •Touch-safe •Pluggable to the female plug B2CF 3.50 PUSH IN •Plugging direction parallel to PCB (recumbent) •Housing variants: closed (G) and with solder flange (LF). •Packed in a carton (BX) •3.2-mm pin length suitable for reflow and wave soldering. Note: • Gold-plated contact surface on request • Tape packaged on request • See hole pattern for distance between rows • Rated voltage referenced to rated cross-section and minimum poles • P on drg. = pitch • Rated data relate to the respective component. Clearance and creepage distances to other components must be set in accordance with the relevant application standard. PASTE-FREE AREA Technical data In compliance with IEC 60664-1 / IEC 61984 Clamping range, max. mm² Solid core H05(07) V-U mm² Stranded H07 V-R Flexible H05(07) V-K mm² Flexible with ferrule mm² Ferrule with plastic collar mm² Stripping length mm Screwdriver blade mm According to norm Tightening torque range Nm Rated current, max. A 10 9 At ambient temperature 20°C 40°C For conductor cross-section mm² 1,5 Overvoltage category III III II Pollution severity 3 2 2 Rated voltage V 80 160 200 Rated impulse voltage kV 2,5 2,5 2,5 UL / CUL (Use Group) B C D Rated voltage V 150 50 Rated current A 10 10 AWG conductor AWG CSA (Use Group) B C D Rated voltage V 150 Rated current A 10 AWG conductor AWG General data Type of insulation material LCP GF Flammability class UL 94 V-0 Contact base material Copper alloy Material of contact surface tinned Pin dimensions = d mm 1,0, Octagonal Solder eyelet Ø = D mm 1,3 Solder eyelet Ø tolerance mm + 0,1 C.2 Accessories Note: Refer to the Accessories chapter for additional accessories. Coding Order No. B2L/S2L 3.5 KO OR 1849730000 B2L/S2L 3.5 KO SW 1849740000 LED light guide S2L-SMT 3.5 FLA 20/10 1814590000 Ordering data Solder pin length Colour Pitch 3,50 mm Pol. 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 L1 3,50 7,00 10,50 14,00 17,50 21,00 24,50 28,00 31,50 35,00 38,50 42,00 45,50 49,00 52,50 56,00 59,50 (inch) 0,138 0,276 0,413 0,551 0,689 0,827 0,965 1,102 1,240 1,378 1,516 1,654 1,791 1,929 2,067 2,205 2,343 Qty. 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20 20 20 1,5 mm black 3,2 mm black Order No. 1289630000 1289640000 1289650000 1289670000 1289680000 1289700000 1289710000 1289720000 1289730000 1289740000 1289750000 1289770000 1289780000 1289790000 1289800000 1289810000 1289820000 Order No. 1288980000 1289270000 1289280000 1289290000 1289300000 1289310000 1289320000 1289330000 1289340000 1289350000 1289370000 1289380000 1289390000 1289410000 1289420000 1289430000 1289440000 1349440000 – 2012 Device connectivity and electronics housings Device connectivity and electronics housings | Powerful compact connector with PUSH IN wire connection S2C-SMT 3.50/../90LF Box S2C-SMT 3.50/../180G Box S2C-SMT 3.50/../180LF Box With solder flange Closed side With solder flange Solder pin length Colour Pitch 3,50 mm Pol. 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 L1 3,50 7,00 10,50 14,00 17,50 21,00 24,50 28,00 31,50 35,00 38,50 42,00 45,50 49,00 52,50 56,00 59,50 (inch) 0,138 0,276 0,413 0,551 0,689 0,827 0,965 1,102 1,240 1,378 1,516 1,654 1,791 1,929 2,067 2,205 2,343 1349440000 – 2012 Qty. 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20 20 20 1,5 mm black 3,2 mm black Order No. 1289830000 1289840000 1289850000 1289870000 1289880000 1289890000 1289910000 1289930000 1289940000 1289950000 1289960000 1289970000 1289980000 1289990000 1290000000 1290010000 1290020000 Order No. 1289450000 1289460000 1289470000 1289480000 1289490000 1289500000 1289510000 1289520000 1289530000 1289540000 1289550000 1289570000 1289580000 1289590000 1289600000 1289610000 1289620000 Ordering data Solder pin length Colour Pitch 3,50 mm Pol. 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 L1 3,50 7,00 10,50 14,00 17,50 21,00 24,50 28,00 31,50 35,00 38,50 42,00 45,50 49,00 52,50 56,00 59,50 (inch) 0,138 0,276 0,413 0,551 0,689 0,827 0,965 1,102 1,240 1,378 1,516 1,654 1,791 1,929 2,067 2,205 2,343 Qty. 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20 20 20 PASTE-FREE AREA 1,5 mm black 3,5 mm black Order No. 1290410000 1290420000 1290430000 1290440000 1290450000 1290460000 1290470000 1290480000 1290490000 1290510000 1290520000 1290530000 1290540000 1290550000 1290560000 1290570000 1290580000 Order No. 1290030000 1290040000 1290050000 1290060000 1290070000 1290080000 1290090000 1290110000 1290120000 1290130000 1290140000 1290150000 1290160000 1290170000 1290180000 1290190000 1290210000 L1+7.1 L1+0.278" Ordering data Solder pin length Colour Pitch 3,50 mm Pol. 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 4.1 0.159" max. 1.2 max. 0.047" max. 1.4 max. 0.055" L1 3,50 7,00 10,50 14,00 17,50 21,00 24,50 28,00 31,50 35,00 38,50 42,00 45,50 49,00 52,50 56,00 59,50 (inch) 0,138 0,276 0,413 0,551 0,689 0,827 0,965 1,102 1,240 1,378 1,516 1,654 1,791 1,929 2,067 2,205 2,343 Qty. 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20 20 20 max. 1.05 max. 0.041" PASTE-FREE AREA 2.5 0.098" D max. 1.2 max. 0.047" max. 1.2 max. 0.047" 2.5 0.098" d P 2.5 0.098" max. 1.2 max. 0.047" 2.5 0.098" max. 1.4 max. 0.055" max. 1.8 max. 0.071" 4.5 0.175" Ordering data PASTE-FREE AREA 3.5 0.138" Ø 1.2 0.047" L1 D +0.1 0 .5 Ø 1 59" 0.0 L1+7.1 L1+0.278" C 10.8 0.425" max. 1.4 max. 0.055" Ø 1.5 +0.1 0 0.059 " P 14.2 0.559" L -0.3 4.1 0.159" 4.1 0.159" L1 2.5 0.098" D max. 1.2 max. 0.047" max. 1.4 max. 0.055" 3.1 0.12" P max. 1.4 max. 0.055" max. 0.3 max. 0.012" L1 5.6 0.219" 0 L1+3xP 14.2 0.559" d 10.8 0.425" 10.8 0.425" 3.6 0.142" d Ø 1.2 0.047" 2.5 0.098" 0 L -0.3 Dimensioned drawing 0 L -0.3 L1+4.9 L1+0.193" 2.5 0.098" 14.2 0.559" max. 0,3 max. 0.012" Dimensioned drawing L1+3xP 2.5 0.098" Dimensioned drawing 1,5 mm black 3,5 mm black Order No. 1290590000 1290610000 1290620000 1290640000 1290650000 1290660000 1290670000 1290680000 1290690000 1290710000 1290720000 1290730000 1290740000 1290750000 1290760000 1290770000 1290780000 Order No. 1290220000 1290230000 1290240000 1290250000 1290260000 1290270000 1290280000 1290290000 1290310000 1290320000 1290330000 1290340000 1290350000 1290360000 1290370000 1290380000 1290390000 C.3 Device connectivity and electronics housings Device connectivity and electronics housings | Powerful compact connector with PUSH IN wire connection Preliminary product data B2C 3.50/../180 Product data B2CF 3.50/../180 IEC: 320 V / 10 A / 0,14 - 1,5 mm² UL: 300 V / 10 A / AWG 26 - AWG 16 For additional articles and information, refer to catalog.weidmueller.com L1+P L1 P 26.2 1.033" 18.3 0.719" 15.7 0.619" 7 0.275" C Dimensioned drawing 2.5 0.098" Double female plug with PUSH IN wire connection. •Simply insert the prepared wire and it‘s ready. •Intuitive handling – since the wire-entry area and handling area are clearly separated. •Integrated push-button for opening the terminal point •High component density because of low heights •Optional: the lock and release requires no tools when using Weidmüller‘s patented (LR) release latch. •Approval according to IEC 60335 and GL pending Note: • Gold-plated contact surface on request • Crimping shape „A“ for wire end ferrules with PZ 1,5 crimping tools Order No. 9005990000 or PZ 6/5 Order No. 9011460000 recommended for the largest conductor cross-section • Rated voltage referenced to rated cross-section and minimum poles • Wire end ferrule without plastic collar to DIN 46228/1 • Wire end ferrule with plastic collar to DIN 46228/4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. • Compatible with Series S2L 3.50, S2L-SMT 3.50 and S2LD 3.50 In compliance with IEC 60664-1 / IEC 61984 Clamping range, max. mm² 0,14…1,5 Solid core H05(07) V-U mm² 0,14…1,5 Stranded H07 V-R Flexible H05(07) V-K mm² 0,14…1,5 Flexible with ferrule mm² 0,14…1,5 Ferrule with plastic collar mm² 0,14…1 Stripping length mm 12 Screwdriver blade mm According to norm Tightening torque range Nm Rated current, max. A 10,3 8,9 At ambient temperature 20°C 40°C For conductor cross-section mm² 1 Overvoltage category III III II Pollution severity 3 2 2 Rated voltage V 160 160 320 Rated impulse voltage kV 2,5 2,5 2,5 UL / CUL (Use Group) B C D Rated voltage V Rated current A AWG conductor AWG CSA (Use Group) B C D Rated voltage V 300 Rated current A 5 AWG conductor AWG 26-16 General data Type of insulation material PA 66 GF 30 Flammability class UL 94 V-0 Contact base material Copper alloy Material of contact surface tinned Pin dimensions = d mm Solder eyelet Ø = D mm Solder eyelet Ø tolerance mm Accessories Note: Refer to the Accessories chapter for additional accessories. Coding Order No. B2L/S2L 3.5 KO OR 1849730000 B2L/S2L 3.5 KO SW 1849740000 Strain relief Screwdriver Crimping tool BL 3.5 ZE 3 OR BL 3.5 ZE 3 SW BL 3.5 ZE 8 OR BL 3.5 ZE 8 SW 1629680000 1627820000 1629690000 1627830000 SD 0,4x2,5x75 9009030000 PZ 1.5 PZ 6/5 9005990000 9011460000 Ordering data Solder pin length Colour Pitch 3,50 mm Pol. 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 L1 3,50 7,00 10,50 14,00 17,50 21,00 24,50 28,00 31,50 35,00 38,50 42,00 45,50 49,00 52,50 56,00 59,50 (inch) 0,138 0,276 0,413 0,551 0,689 0,827 0,965 1,102 1,240 1,378 1,516 1,654 1,791 1,929 2,067 2,205 2,343 Qty. 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20 20 20 orange black Order No. 1277270000 1277280000 1277290000 1277310000 1277320000 1277330000 1277340000 1277350000 1277360000 1277370000 1277380000 1277390000 1277410000 1277420000 1277430000 1277440000 1277450000 Order No. 1277460000 1277470000 1277480000 1277490000 1277510000 1277520000 1277530000 1277540000 1277550000 1277560000 1277570000 1277580000 1277590000 1277610000 1277620000 1277630000 1277640000 Representative derating curve B2CF 3.50/../180 - S2C-SMT 3.50/../90 load current I [A] Technical data 14 C 12 10 A 8 B 6 4 A = 4-pos B = 36-pos. C = 1.0 mm2 (H05V-K1 / EN 60947-7-1) 2 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 ambient temperature T [°C] C.4 1349440000 – 2012 Device connectivity and electronics housings Device connectivity and electronics housings | Powerful compact connector with PUSH IN wire connection B2CF 3.50/../180F B2CF 3.50/../180LR With flange With release lever Dimensioned drawing P M2 L1 3,50 7,00 10,50 14,00 17,50 21,00 24,50 28,00 31,50 35,00 38,50 42,00 45,50 49,00 52,50 56,00 59,50 (inch) 0,138 0,276 0,413 0,551 0,689 0,827 0,965 1,102 1,240 1,378 1,516 1,654 1,791 1,929 2,067 2,205 2,343 1349440000 – 2012 FRONT PLATE CUT-OUT Ordering data Solder pin length Colour Pol. 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 5.5 0.215" FRONT PLATE CUT-OUT Ordering data Pitch 3,50 mm 11.2 0.441" 4.5 0.175" 5.5 0.215" 3.6 0.143" 10.2 0.4" 11.2 0.441" 4.5 0.175" L1+P+0.4 L1+P+0.016 C 18.3 0.719" L1+P+0.4 L1+P+0.016 2.6 0.102" 7 0.275" L1+P+6.3 L1+p+0.248" 7 0.275" L1+P+6.8 L1+p+0.268" 26.2 1.033" 15.7 0.619" 22.7 0.894" 8.2 0.324" 2.5 0.098" P L1+P L1 2.5 0.098" 1.7 0.067" 26.2 1.033" 18.3 0.719" 15.7 0.619" L1+P L1 10.2 0.4" 15.2 0.599" Dimensioned drawing Qty. 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20 20 20 orange black Order No. 1277650000 1277670000 1277680000 1277690000 1277720000 1277730000 1277740000 1277750000 1277760000 1277770000 1277780000 1277790000 1277810000 1277820000 1277830000 1277840000 1277850000 Order No. 1277860000 1277870000 1277880000 1277890000 1277900000 1277910000 1277920000 1277930000 1277940000 1277950000 1277970000 1277980000 1277990000 1278000000 1278010000 1278020000 1278030000 Solder pin length Colour Pitch 3,50 mm Pol. 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 L1 3,50 7,00 10,50 14,00 17,50 21,00 24,50 28,00 31,50 35,00 38,50 42,00 45,50 49,00 52,50 56,00 59,50 (inch) 0,138 0,276 0,413 0,551 0,689 0,827 0,965 1,102 1,240 1,378 1,516 1,654 1,791 1,929 2,067 2,205 2,343 Qty. 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20 20 20 orange black Order No. 1278040000 1278050000 1278060000 1278070000 1278080000 1278090000 1278100000 1278110000 1278120000 1278130000 1278140000 1278150000 1278170000 1278180000 1278190000 1278200000 1278210000 Order No. 1278230000 1278240000 1278250000 1278260000 1278270000 1278280000 1278290000 1278300000 1278310000 1278320000 1278340000 1278350000 1278370000 1278380000 1278390000 1278400000 1278410000 C.5