Download

For flexible equipment design with fully automatic SMD assembly
OMNIMATE Signal LSF-SMD unites connection efficiency & design flexibility
Let’s connect.
OMNIMATE – device connectivity
You have stringent requirements from device design to installation
We support SMD assembly with “PUSH IN” PCB terminals
One of the goals in having freedom of design during device development is to
efficiently assemble printed circuit boards while ensuring a high level of quality.
During installation, handling and time savings are of paramount importance. With
a wide range of “PUSH IN” PCB terminals designed for the SMD reflow soldering
process, Weidmüller meets the requirements of practical application: from fully
automatic surface mounting to the practical plug-in connections for installing
devices.
Thanks to its tried-and-tested OMNIMATE products, Weidmüller is a longstanding partner of renowned device
manufacturers.
Their needs are of primary importance when it comes to developing new products and solutions. At Weidmüller, the focus is
therefore on using the increasingly popular SMD reflow soldering process. As the technique allows the connection elements
to be processed fully automatically with the component assembly in a single manufacturing process, a consistently high
degree of efficiency can be achieved in the manufacturing of devices for the electronics sector. Maximum freedom in device
design also relies on space being available on the PCB and the possibility of assembling different kinds of material. This is
also an area which calls for SMD assembly, which is now used for both active and passive components.
SMD soldering implies space saving and design freedom. When SMD components are used, the reverse side
of the PCB remains free and can be used for mounting other components.
Device manufacturers have, at best, double the amount of space at their disposal in the case of a dual-sided PCB assembly –
alternatively, they can use a circuit board half the size, which allows the entire device to have a more compact design.
Connectivity is also possible with composite PCBs ​​made of glass, ceramic or aluminium, a feature which plays an important
role when designing devices in the area of LED lighting, for example. This often involves the installation of aluminium heat
sinks, which provides no possibility for drilling holes. In such cases, SMD technology is the ideal solution for attaching the
necessary connection components.
The new OMNIMATE Signal LSF-SMD product line from Weidmüller is characterised by numerous special
features and has been optimally adapted for use in multiple fields through a uniquely wide range of products.
The LSF-SMD family expands the diverse product portfolio of reflow-compatible LSF-SMT components and meets all of the
requirements of fully automatic PCB surface mounting for three main pitches and three wire outlet directions. In combination
with its ubiquitous “PUSH IN” connection system, Weidmüller is fully able to satisfy the demand for high efficiency from
circuit board assembly to the installation of ready-to-use devices.
2
3
Your future lies in SMD assembly
OMNIMATE Signal LSF-SMD provides enormous scope for design
Fast wire connection method
The proven “PUSH IN” direct connectivity
enables secure contacts up to 1.5 mm² without
the need for tools. Conductors can be released
simply and quickly by pressing the release
button.
Efficient assembly
Automatic assembly is supported by the tapeon-reel packaging in standard belt widths. Pickand-Place pads guarantee reliable attaching and
setting down.
Freedom of design in device development involves the goal of efficiently
assembling printed circuit boards so as to ensure quality.
Our LSF-SMD family featuring “PUSH IN” direct connectivity supports
the requirements of fully-automatic surface installation. Let’s connect.
Maximum freedom with regard to PCB design calls for flexible terminal solutions
that can also establish secure contacts with composite PCBs made from glass,
ceramic or aluminium.
SMD
With our new LSF-SMD family, we are satisfying demands for fully-automatic
PCB surface installation using the SMD soldering procedure. Two soldering pads
per pole provide a high level of mechanical stability according to IPC A 610 Class
2. A reliable connection is established without tools thanks to “PUSH IN” direct
connectivity.
The 3.50 mm, 5.00 mm and 7.50 mm pitches and the 90°, 135° and 180°
conductor outlet directions cover a multitude of device requirements and offer
high component density with a maximum connection cross-section of 1.5
mm². Use of the distortion-free insulating material LCP, which is resistant to
high temperatures and has a moisture level of MSL 1, enables a high level of
dimensional stability, thus guaranteeing co-planarity for the reflow soldering
process without the need for a drying phase beforehand.
Reliable processing
Use of the LCP insulating material means that
assembly can take place directly during the SMT
process without the need for pre-drying. There is
no risk of blisters forming.
Stable soldering connections
Featuring two soldering pads per pole, LSFSMD PCB terminals satisfy the most stringent
mechanical fixing requirements without the
need for additional mounting flanges.
More design freedom for design ideas
Drilled holes and feed-throughs on PCBs cost time, take up space and compromise the freedom of developers. Our wide SMD range featuring “PUSH IN”
direct connectivity is economical and opens up new design possibilities. For LED devices featuring an aluminium cooling element, for instance, where no
holes can be drilled.
4
5
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
In compliance with IEC 60664-1 / IEC 61984
Clamping range, max.
mm²
0.13...1.5
Solid core H05(07) V-U
mm²
0.2...1.5
Stranded H07 V-R
0.2...1.5
Flexible H05(07) V-K
mm²
0.25...1.5
Flexible with ferrule
mm²
0.25...0.75
Ferrule with plastic collar
mm²
8
Stripping length
mm
mm
Screwdriver blade
According to norm
Tightening torque range
Nm
17.5
Rated current, max.
A 17.5
20°C
40°C
At ambient temperature
1.5
For conductor cross-section
mm²
III
III
II
Overvoltage category
3
2
2
Pollution severity
Rated voltage
V 160 160 320
Rated impulse voltage
kV 2.5 2.5 2.5
B
C
D
UL / CUL (Use Group)
300
Rated voltage
V 300
10
Rated current
A 12
24-16
AWG
AWG conductor
B
C
D
CSA (Use Group)
300
Rated voltage
V 300
10
Rated current
A 10
AWG
24-16
AWG conductor
General data
LCP GF
Type of insulation material
V-0
UL 94 flammability rating
Copper alloy
Contact base material
tinned
Material of contact surface
6
LSF-SMD 3.5/../135
Reflow-compatible PCB terminal
IEC: 320 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
For additional articles and information, refer to
catalog.weidmueller.com
For additional articles and information, refer to
catalog.weidmueller.com
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
Dimensioned drawing
max. 14
max. 0.551"
12.3
0.484"
L1
11.85
0.467"
1.9
0.075"
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
0.8
0.032"
7.75
0.305"
L1+4.2
L1+0.165"
L1+4.2
L1+0.165"
3.50 mm
L1
3.50
7.00
10.50
14.00
17.50
21.00
24.50
28.00
31.50
35.00
38.50
Black
(inch)
0.138
0.276
0.413
0.551
0.689
0.827
0.965
1.102
1.240
1.378
1.516
Representative deratings curve
Qty.
320
320
320
320
320
320
320
320
320
320
320
Order No.
1412410000
1412420000
1473510000
1473520000
1473530000
1473540000
1473550000
1473570000
1473590000
1473620000
1473650000
In compliance with IEC 60664-1 / IEC 61984
Clamping range, max.
mm²
0.13...1.5
Solid core H05(07) V-U
mm²
0.2...1.5
Stranded H07 V-R
0.2...1.5
Flexible H05(07) V-K
mm²
0.25...1.5
Flexible with ferrule
mm²
0.25...0.75
Ferrule with plastic collar
mm²
8
Stripping length
mm
mm
Screwdriver blade
According to norm
Tightening torque range
Nm
17.5
Rated current, max.
A 17.5
20°C
40°C
At ambient temperature
1.5
For conductor cross-section
mm²
III
III
II
Overvoltage category
3
2
2
Pollution severity
Rated voltage
V 160 160 320
Rated impulse voltage
kV 2.5 2.5 2.5
B
C
D
UL / CUL (Use Group)
300
Rated voltage
V 300
10
Rated current
A 12
24-16
AWG
AWG conductor
B
C
D
CSA (Use Group)
300
Rated voltage
V 300
10
Rated current
A 10
AWG
24-16
AWG conductor
General data
LCP GF
Type of insulation material
V-0
UL 94 flammability rating
Copper alloy
Contact base material
tinned
Material of contact surface
12.7
0.5"
9.5
0.374"
L1
1.9
0.075"
3.4
0.132"
Technical data
Solder pin length
Colour
Pol.
2
3
4
5
6
7
8
9
10
11
12
Dimensioned drawing
1.6
0.063"
Ordering data
Pitch
PCB terminal for fully automatic assembly using reflow
soldering (SMD). with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires & stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 135°
SMD
12.9
0.508"
SMD
5.25
0.207"
Technical data
Product data
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
1.2
0.047"
Reflow-compatible PCB terminal
IEC: 320 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires & stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 90°
LSF-SMD 3.5/../135
LSF-SMD 3.5/../90
11.4
0.447"
Product data
13.25
0.522"
LSF-SMD 3.5/../90
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
1.6
0.063"
Ordering data
Solder pin length
Colour
Pitch
Pol.
2
3
4
5
6
7
8
9
10
11
12
3.50 mm
L1
3.50
7.00
10.50
14.00
17.50
21.00
24.50
28.00
31.50
35.00
38.50
Black
(inch)
0.138
0.276
0.413
0.551
0.689
0.827
0.965
1.102
1.240
1.378
1.516
Qty.
210
210
210
210
210
210
210
210
210
210
210
Order No.
1473310000
1473320000
1473330000
1473340000
1473350000
1473370000
1473380000
1473390000
1473410000
1473420000
1473430000
Representative deratings curve
7
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
Reflow-compatible PCB terminal
IEC: 320 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
Product data
LSF-SMD 5.00/../90
Reflow-compatible PCB terminal
IEC: 500 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
For additional articles and information, refer to
catalog.weidmueller.com
For additional articles and information, refer to
catalog.weidmueller.com
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
11.7
0.461"
8.5
0.335"
14.3
0.563"
14.7
0.579"
10.3
0.406"
2.1
0.083"
In compliance with IEC 60664-1 / IEC 61984
Clamping range, max.
mm²
0.13...1.5
Solid core H05(07) V-U
mm²
0.2...1.5
Stranded H07 V-R
0.2...1.5
Flexible H05(07) V-K
mm²
0.25...1.5
Flexible with ferrule
mm²
0.25...0.75
Ferrule with plastic collar
mm²
8
Stripping length
mm
mm
Screwdriver blade
According to norm
Tightening torque range
Nm
17.5
Rated current, max.
A 17.5
20°C
40°C
At ambient temperature
1.5
For conductor cross-section
mm²
III
III
II
Overvoltage category
3
2
2
Pollution severity
Rated voltage
V 160 160 320
Rated impulse voltage
kV 2.5 2.5 2.5
B
C
D
UL / CUL (Use Group)
300
Rated voltage
V 300
10
Rated current
A 12
24-16
AWG
AWG conductor
B
C
D
CSA (Use Group)
300
Rated voltage
V 300
10
Rated current
A 10
AWG
24-16
AWG conductor
General data
LCP GF
Type of insulation material
V-0
UL 94 flammability rating
Copper alloy
Contact base material
tinned
Material of contact surface
8
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
Ordering data
Technical data
Solder pin length
Colour
Pitch
Pol.
2
3
4
5
6
7
8
9
10
11
12
3.50 mm
L1
3.50
7.00
10.50
14.00
17.50
21.00
24.50
28.00
31.50
35.00
38.50
Black
(inch)
0.138
0.276
0.414
0.552
0.690
0.828
0.966
1.104
1.242
1.380
1.518
Representative deratings curve
Qty.
180
180
180
180
180
180
180
180
180
180
180
Order No.
1250360000
1250370000
1250380000
1250390000
1250410000
1250420000
1250430000
1250440000
1250450000
1250460000
1250470000
In compliance with IEC 60664-1 / IEC 61984
Clamping range, max.
mm²
0.13...1.5
Solid core H05(07) V-U
mm²
0.2...1.5
Stranded H07 V-R
0.2...1.5
Flexible H05(07) V-K
mm²
0.25...1.5
Flexible with ferrule
mm²
0.25...0.75
Ferrule with plastic collar
mm²
8
Stripping length
mm
mm
Screwdriver blade
According to norm
Tightening torque range
Nm
17.5
Rated current, max.
A 17.5
20°C
40°C
At ambient temperature
1.5
For conductor cross-section
mm²
III
III
II
Overvoltage category
3
2
2
Pollution severity
Rated voltage
V 250 320 500
4
4
Rated impulse voltage
kV 4
B
C
D
UL / CUL (Use Group)
300
Rated voltage
V 300
10
Rated current
A 12
24-16
AWG
AWG conductor
B
C
D
CSA (Use Group)
300
Rated voltage
V 300
10
Rated current
A 10
AWG
24-16
AWG conductor
General data
LCP GF
Type of insulation material
V-0
UL 94 flammability rating
Copper alloy
Contact base material
tinned
Material of contact surface
11.85
0.467"
3.4
0.134"
5.25
0.207"
11.4
0.447"
Accessories
max. 14
max. 0.551"
12.3
0.484"
L1+4.2
L1+0.165"
1.4
0.055"
Technical data
Dimensioned drawing
8.5
0.335"
Dimensioned drawing
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires & stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 90°
SMD
13.25
0.522"
SMD
3.4
0.132"
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires & stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 180°
LSF-SMD 5.00/../90
LSF-SMD 3.50/180
0.8
0.031"
Product data
0.8
0.032"
LSF-SMD 3.50/180
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
1.6
0.063"
Ordering data
Solder pin length
Colour
Pitch
Pol.
2
3
4
5
6
7
8
5.00 mm
L1
5.00
10.00
15.00
20.00
25.00
30.00
35.00
Black
(inch)
0.197
0.394
0.591
0.787
0.984
1.181
1.378
Qty.
320
320
320
320
320
320
320
Order No.
1473770000
1473780000
1473790000
1473800000
1473810000
1473820000
1473830000
Representative deratings curve
9
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
In compliance with IEC 60664-1 / IEC 61984
Clamping range, max.
mm²
0.13...1.5
Solid core H05(07) V-U
mm²
0.2...1.5
Stranded H07 V-R
0.2...1.5
Flexible H05(07) V-K
mm²
0.25...1.5
Flexible with ferrule
mm²
0.25...0.75
Ferrule with plastic collar
mm²
8
Stripping length
mm
mm
Screwdriver blade
According to norm
Tightening torque range
Nm
17.5
Rated current, max.
A 17.5
20°C
40°C
At ambient temperature
1.5
For conductor cross-section
mm²
III
III
II
Overvoltage category
3
2
2
Pollution severity
Rated voltage
V 250 320 500
4
4
Rated impulse voltage
kV 4
B
C
D
UL / CUL (Use Group)
300
Rated voltage
V 300
10
Rated current
A 12
24-16
AWG
AWG conductor
B
C
D
CSA (Use Group)
300
Rated voltage
V 300
10
Rated current
A 10
AWG
24-16
AWG conductor
General data
LCP GF
Type of insulation material
V-0
UL 94 flammability rating
Copper alloy
Contact base material
tinned
Material of contact surface
10
LSF-SMD 5.00/../180
Reflow-compatible PCB terminal
IEC: 500 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
For additional articles and information, refer to
catalog.weidmueller.com
For additional articles and information, refer to
catalog.weidmueller.com
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
Dimensioned drawing
L1+4.2
L1+0.165"
9.5
0.374"
L1
3.4
0.134"
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
1.2
0.047"
14.45
0.569"
12.7
0.5"
Pol.
2
3
4
5
6
7
8
L1
5.00
10.00
15.00
20.00
25.00
30.00
35.00
Black
(inch)
0.197
0.394
0.591
0.787
0.984
1.181
1.378
Representative deratings curve
Qty.
210
210
210
210
210
210
210
Order No.
1473690000
1473700000
1473710000
1473720000
1473740000
1473750000
1473760000
In compliance with IEC 60664-1 / IEC 61984
Clamping range, max.
mm²
0.13...1.5
Solid core H05(07) V-U
mm²
0.2...1.5
Stranded H07 V-R
0.2...1.5
Flexible H05(07) V-K
mm²
0.25...1.5
Flexible with ferrule
mm²
0.25...0.75
Ferrule with plastic collar
mm²
8
Stripping length
mm
mm
Screwdriver blade
According to norm
Tightening torque range
Nm
17.5
Rated current, max.
A 17.5
20°C
40°C
At ambient temperature
1.5
For conductor cross-section
mm²
III
III
II
Overvoltage category
3
2
2
Pollution severity
Rated voltage
V 250 320 500
4
4
Rated impulse voltage
kV 4
B
C
D
UL / CUL (Use Group)
300
Rated voltage
V 300
10
Rated current
A 12
24-16
AWG
AWG conductor
B
C
D
CSA (Use Group)
300
Rated voltage
V 300
10
Rated current
A 10
AWG
24-16
AWG conductor
General data
LCP GF
Type of insulation material
V-0
UL 94 flammability rating
Copper alloy
Contact base material
tinned
Material of contact surface
8.5
0.335"
L1
10.5
0.413"
3.4
0.134"
3.4
0.132"
Technical data
Solder pin length
Colour
5.00 mm
Dimensioned drawing
L1+4.2
L1+0.165"
1.6
0.063"
Ordering data
Pitch
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires & stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 180°
SMD
max. 14
max. 0.551"
12.3
0.484"
SMD
3.4
0.132"
Technical data
Product data
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
0.8
0.032"
Reflow-compatible PCB terminal
IEC: 500 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires & stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 135°
LSF-SMD 5.00/../180
LSF-SMD 5.00/../135
11.4
0.447"
Product data
11.4
0.447"
LSF-SMD 5.00/../135
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
1.6
0.063"
Ordering data
Solder pin length
Colour
Pitch
Pol.
2
3
4
5
6
7
8
5.00 mm
L1
5.00
10.00
15.00
20.00
25.00
30.00
35.00
Black
(inch)
0.197
0.394
0.591
0.787
0.984
1.181
1.378
Qty.
180
180
180
180
180
180
180
Order No.
1473560000
1473580000
1473610000
1473640000
1473660000
1473670000
1473680000
Representative deratings curve
11
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
In compliance with IEC 60664-1 / IEC 61984
Clamping range, max.
mm²
0.13...1.5
Solid core H05(07) V-U
mm²
0.2...1.5
Stranded H07 V-R
0.2...1.5
Flexible H05(07) V-K
mm²
0.25...1.5
Flexible with ferrule
mm²
0.25...0.75
Ferrule with plastic collar
mm²
8
Stripping length
mm
mm
Screwdriver blade
According to norm
Tightening torque range
Nm
17.5
Rated current, max.
A 17.5
20°C
40°C
At ambient temperature
1.5
For conductor cross-section
mm²
III
III
II
Overvoltage category
3
2
2
Pollution severity
Rated voltage
V 500 630 800
6
6
Rated impulse voltage
kV 6
B
C
D
UL / CUL (Use Group)
Rated voltage
V 300 150 300
Rated current
A 12 10 10
24-16
AWG
AWG conductor
B
C
D
CSA (Use Group)
Rated voltage
V 300 150 300
10
10
Rated current
A 10
AWG
24-16
AWG conductor
General data
LCP GF
Type of insulation material
V-0
UL 94 flammability rating
Copper alloy
Contact base material
tinned
Material of contact surface
12
LSF-SMD 7.50/../135
Reflow-compatible PCB terminal
IEC: 800 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
For additional articles and information, refer to
catalog.weidmueller.com
For additional articles and information, refer to
catalog.weidmueller.com
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
7.75
0.305"
L1+4.2
L1+0.165"
11.85
0.467"
L1
5.9
0.232"
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
max. 14
max. 0.551"
12.3
0.484"
0.8
0.031"
Dimensioned drawing
Pol.
2
3
4
5
6
L1
7.50
15.00
22.50
30.00
37.50
Black
(inch)
0.295
0.591
0.886
1.181
1.476
Representative deratings curve
Qty.
320
320
320
320
320
Order No.
1473940000
1473950000
1473960000
1473970000
1473980000
In compliance with IEC 60664-1 / IEC 61984
Clamping range, max.
mm²
0.13...1.5
Solid core H05(07) V-U
mm²
0.2...1.5
Stranded H07 V-R
0.2...1.5
Flexible H05(07) V-K
mm²
0.25...1.5
Flexible with ferrule
mm²
0.25...0.75
Ferrule with plastic collar
mm²
8
Stripping length
mm
mm
Screwdriver blade
According to norm
Tightening torque range
Nm
17.5
Rated current, max.
A 17.5
20°C
40°C
At ambient temperature
1.5
For conductor cross-section
mm²
III
III
II
Overvoltage category
3
2
2
Pollution severity
Rated voltage
V 500 630 800
6
6
Rated impulse voltage
kV 6
B
C
D
UL / CUL (Use Group)
300
Rated voltage
V 300
10
Rated current
A 12
24-16
AWG
AWG conductor
B
C
D
CSA (Use Group)
300
Rated voltage
V 300
10
Rated current
A 10
AWG
24-16
AWG conductor
General data
LCP GF
Type of insulation material
V-0
UL 94 flammability rating
Copper alloy
Contact base material
tinned
Material of contact surface
12.7
0.5"
L1
9.5
0.374"
5.9
0.232"
3.4
0.132"
Technical data
Solder pin length
Colour
7.50 mm
Dimensioned drawing
L1+4.1
L1+0.160"
1.6
0.063"
Ordering data
Pitch
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires & stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 135°
SMD
12.9
0.508"
SMD
5.25
0.207"
Technical data
Product data
1.2
0.047"
Reflow-compatible PCB terminal
IEC: 800 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires & stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 90°
LSF-SMD 7.50/../135
LSF-SMD 7.50/../90
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
11.4
0.447"
Product data
13.25
0.522"
LSF-SMD 7.50/../90
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
1.6
0.063"
Ordering data
Solder pin length
Colour
Pitch
Pol.
2
3
4
5
6
7.50 mm
L1
7.50
15.00
22.50
30.00
37.50
Black
(inch)
0.295
0.591
0.886
1.181
1.476
Qty.
210
210
210
210
210
Order No.
1473890000
1473900000
1473910000
1473920000
1473930000
Representative deratings curve
13
OMNIMATE Signal – LSF-SMD | “PUSH IN” spring connection
LSF-SMD 7.50/../180
Product data
LSF-SMD 7.50/../180
Flexible, robust and practical
LSF-SMD PCB terminals fulfil the highest standards
Reflow-compatible PCB terminal
IEC: 800 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - 16
For additional articles and information, refer to
catalog.weidmueller.com
SMD
Dimensioned drawing
Technical data
In compliance with IEC 60664-1 / IEC 61984
Clamping range, max.
mm²
0.13...1.5
Solid core H05(07) V-U
mm²
0.2...1.5
Stranded H07 V-R
0.2...1.5
Flexible H05(07) V-K
mm²
0.25...1.5
Flexible with ferrule
mm²
0.25...0.75
Ferrule with plastic collar
mm²
8
Stripping length
mm
mm
Screwdriver blade
According to norm
Tightening torque range
Nm
17.5
Rated current, max.
A 17.5
20°C
40°C
At ambient temperature
1.5
For conductor cross-section
mm²
III
III
II
Overvoltage category
3
2
2
Pollution severity
Rated voltage
V 500 630 800
6
6
Rated impulse voltage
kV 6
B
C
D
UL / CUL (Use Group)
Rated voltage
V 300 150 300
Rated current
A 12 10 10
24-16
AWG
AWG conductor
B
C
D
CSA (Use Group)
Rated voltage
V 300 150 300
10
10
Rated current
A 10
AWG
24-16
AWG conductor
General data
LCP GF
Type of insulation material
V-0
UL 94 flammability rating
Copper alloy
Contact base material
tinned
Material of contact surface
14
8.5
0.335"
0.8
0.032"
12.3
0.484"
max. 14
max. 0.551"
L1+4.2
L1+0.165"
10.5
0.413"
L1
Conformity with standards and the consistently high level of quality of all electronic parts and components are
among the key factors of success in product development, particularly in the industrial environment. Our LSF-SMD
product family meets all of the requirements of PCB terminals in the industrial environment, the conditions of which
are simulated in our accredited laboratory.
LSF-SMD PCB terminals from Weidmüller were specifically designed for soldering using the SMD reflow process
and are able to withstand temperatures of up to 260 °C. The terminals fulfil JEDEC requirements as regards process
sensitivity (PSL) and moisture sensitivity levels (MSL) with the highest rating class. Our LSF-SMD PCB terminals also
stand up to any comparison in terms of coplanarity, strength and vibration resistance. As such, they can easily be
integrated into all of the current production processes.
Accessories
Screwdriver
SDIS 0.4X2.5X75
SDS 0.4X2.5X75
Order No.
9008370000
9009030000
11.4
0.447"
5.9
0.232"
3.4
0.132"
PCB terminal for fully automatic assembly using reflow
soldering (SMD), with PUSH IN wire connections.
Conductor inserted and slider operated in same direction
(TOP).
• Solid wires & stranded wires with wire-end ferrules
need only to be inserted and they are ready.
• When connecting stranded wires without wire-end
ferrules the handling area is used to open the terminal
point
• Intuitive handling – since the wire-entry area and
handling area are clearly separated.
• Packaged in tape-on-reel
• Conductor outlet direction 180°
Note:
• Additional push button colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Operating force of slider max. 40 N
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed in
accordance with the relevant application standards.
• Crimping shape „A“ for wire end ferrules with PZ 6/5 crimping tool
are recommended for the largest cable sizes.
Coplanarity:
1.6
0.063"
Ordering data
Solder pin length
Colour
Pitch
Pol.
2
3
4
5
6
7.50 mm
L1
7.50
15.00
22.50
30.00
37.50
Black
(inch)
0.295
0.591
0.886
1.181
1.476
Qty.
180
180
180
180
180
Order No.
1473840000
1473850000
1473860000
1473870000
1473880000
To ensure reliable soldering quality in the manufacturing process, the contact surfaces
of solder pins must be wetted with the solder paste immediately after assembly. This
allows the flux contained within the paste to react with the Sn coating, resulting in
a reliable soldering quality. The LSF-SMD has a coplanarity of up to 100 μm. We
recommend a stencil thickness of 150 to 200 μm.
max. 100 µm
Mechanical stability:
F
Stability properties are covered by normative values ​​as well as additional practical
testing. The axial torque per contact point (pole) is significantly higher than the values
permitted by the standard IEC 60947-7-4. A clamping force per pole of around 150 N
(40 N limit value for 1.5 mm² conductor cross-sections) in the axial direction is many
times higher than the normative requirements.
Vibration and shock resistance:
Representative deratings curve
A simulated service life test is performed. The test spectrum includes increased
broadband noise and shock in accordance with IEC 61373/10.2011 with a category
1B severity level (“body mounted”) in the 5-to-150-Hz frequency range and with an ASD
level of 1.857 (m/s²)²/Hz 3 dB and an effective acceleration of 5.72 m/s² and 240
degrees of freedom (DOF). The test duration is five hours per axis.
The half-sine shock wave form has a peak acceleration of 50 m/s² and a nominal
duration of 30 ms.
5 – 150 Hz
5G
15
Weidmüller – Your partner in Industrial Connectivity
As experienced experts we support our customers and partners around the world
with products, solutions and services in the industrial environment of power,
signal and data. We are at home in their industries and markets and know the
technological challenges of tomorrow. We are therefore continuously developing
innovative, sustainable and useful solutions for their individual needs. Together we
set standards in Industrial Connectivity.
We cannot guarantee that there are no mistakes in the publications or software
provided by us to the customer for the purpose of making orders. We try our best to
quickly correct errors in our printed media.
All orders are based on our general terms of delivery, which can be reviewed on the
websites of our group companies where you place your order. On demand we can
also send the general terms of delivery to you.
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
32758 Detmold, Germany
Telefon +49 5231 14-0
Telefax +49 5231 14-2083
[email protected]
www.weidmueller.com
Made in Germany
Your local Weidmüller partner can
be found on our website:
www.weidmueller.com/countries
4 050118 323764
Bestellnummer: 1516240000/03/2014/SMKW