SPUJ 2mm-travel Horizontal Type Horizontal type suitable for multiple circuits Detector ■ Typical Specifications Items Specifications Slide Rating(max.)( / min.) (Resistive load) 0.1A 30V DC / 50BA 3V DC Contact resistance (Initial/After operating life) 20mΩ max. / 40mΩ max. 2-pole 1.5±1N 4-pole 2.3±1N Push Operating forces Without load 10,000 cycles Rotary Operating life With load 10,000 cycles(0.1A 30V DC) Product Line Power Changeover timing Travel (mm) Total travel (mm) Mounting method Poles Dual-in-line Package Type 3 Momentary PC board SPUJ190900 SPUJ191000 3,000 Straight SPUJ191500 SPUJ191900 100 Snap-in SPUJ193700 Straight Latching 4 Product No. Export Snap-in 2 2 Japan Straight Latching Non shorting Minimum order unit(pcs.) Terminal type Operation Momentary SPUJ193900 2,000 Snap-in SPUJ194500 Straight Horizontal Type Note Please contact us for automotive use. Vertical Type Packing Specifications Bulk Number of packages(pcs.) Product No. 1 case / Japan 1 case / export packing SPUJ190900, SPUJ191000, SPUJ191500, SPUJ191900 600 3,000 SPUJ193700, SPUJ193900, SPUJ194500 400 2,000 Export package measurements(mm) 400×270×290 Dimensions Unit:mm PC board mounting hole dimensions (Viewed from the direction A) Style 2-pole, 4-pole Total travel 4-pole:22.7 8.8 ø1 hole 4 12.5 2-pole 2-pole 2.5G5 7.2 7.4 4-pole 5 7 P2.5 0.6 15.2 A (2.5) 4-pole 2 3.2 2.5 Terminal No.1 (5) 9.8 5 0.9 Travel 12.5 つまみ Snap-in terminal 3 7.5 Straight terminal 0.7 2.5G5 0.7Gø0.9 hole Thickness of PC board t=1.6mm PC board mounting face 120 Refer to P.138 for soldering conditions. SPUJ/2mm-travel Horizontal Type Unit:mm Circuit Diagram(Viewed from Direction A) 4-pole 2-pole H H Unit:mm Knob outline drawing Model Rotary Color:Black 4.6 Push Attached Parts 1 2 3 1 2 3 4 5 6 Slide 4 5 6 7 8 9 !0 !11 !2 Detector Actuator Configuration at Front Edge 9 UJ206022 1. Other knob varieties are also available. Please inquire. 2. We recommend the use of adhesive to secure the knob when mounting onto switches. Dual-in-line Package Type Notes Power 5 Knob Horizontal Type Knob face Vertical Type 121 Push Switches List of Varieties SPPJ3 SPPJ2 SPUJ※ SPUN SPUN 5 or 6.6 7.2 7.5 10 15.2 22.7 24 36 8.8 13 medium current※ Detector Horizontal Series Photo Dimensions (mm) D 8.3 9.6 2.5 2 2.5 Total travel(mm) 3.5 3 3.5 1 2 Operating temperature range −40℃ to +85℃ Automotive use ● 2 4 2 −10℃ to +60℃ — ● — — Rating(max.) (Resistive load) 0.2A 30V DC 0.1A 30V DC Rating(min.) (Resistive load) Durability Operating life without load 1A 25V DC 30,000 cycles 40mΩ max. 10,000 cycles 40mΩ max. Operating life with load (at max. rated load) 5,000 cycles 40mΩ max. Insulation resistance 100MΩ min. 500V DC Voltage proof 500V AC for 1minute Terminal strength 5N for 1minute 50N 30N 50N — — 50N −40℃ 96h −20℃ 96h Dry heat 85℃ 96h Damp heat 40℃, 90 to 95%RH 96h Page Vertical Type 20mΩ max. Cold 10,000 cycles 40mΩ max. 10,000 cycles 40mΩ max. Initial contact resistance Mechanical Operating performance Actuator direction strength Pulling direction Environmental performance 50μA 3V DC 116 Horizontal Type Electrical performance 1A 25V DC Dual-in-line Package Type Life cycle Power Number of poles Rotary Travel(mm) Push H 12 Slide W 118 120 122 Push Switches Soldering Conditions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 138 Push Switches Cautions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 139 Notes 1. ※ The operating temperature range for automotive applications can be raised upon request. Please contact us for details. 2. ● Indicates applicability to all products in the series. 113 Push Switches Soldering Conditions Detector Example of Reflow Soldering Condition 1. Heating method: Double heating method with infrared heater. 2. Temperature measurement: Thermocouple φ 0.1 to 0.2 CA (K) or CC (T) at soldering portion (copper foil surface). A heat resisting tape should be used for fixed measurement. 3. Temperature profile Push Temperature (˚C ) Slide 300 A max. B 200 D E 100 Rotary Room temperature Time (s) Pre-heating F max. C Power Dual-in-line Package Type Series(Reflow type) A(℃) 3s max. B(℃) C(s) D(℃) E(℃) F(s) 260 230 40 180 150 120 SPEG SPEJ SPEF SPEH Horizontal Type Notes 1. The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Vertical Type Reference for Hand Soldering Series Soldering temperature Soldering time SPPJ3, SPPJ2, SPUN, SPPH4, SPPH1 350±10℃ 3+1/0s SPED2, SPED4 350±10℃ 3±0.5s SPEJ 350±10℃ 4s max. SPEG, SPEF 350±5℃ 3s max. SPEH, SPPH2 350℃ max. 3s max. SPUJ 300±10℃ 3+1/0s Reference for Dip Soldering (For PC board terminal types) Series 138 For PC board 端子タイプに適用 Items Dip soldering Preheating temperature Preheating time Soldering temperature Duration of immersion SPPJ3 100℃ max. 60s max. 260±5℃ 5±1s SPUN 100℃ max. 60s max. 260±5℃ 10±1s SPUJ, SPPH2, SPPH4 — 260±5℃ 5±1s SPPJ2, SPPH1, SPED2, SPED4, SPEF — 260±5℃ 10±1s