SSAJ 0.7（H）mm, 1.4mm-travel Surface Mount Type Compact type with 0.7mm body height Detector ■ Typical Specifications Items Specifications 10mA 5V DC / 50μA 3V DC Contact resistance （Initial performance / After lifetime） 300mΩ max. / 500mΩ max. Operating force Slide Rating（max.）（ / min.） （Resistive load） 1.5±1N Push Without load 10,000 cycles Operating life With load 10,000 cycles（10mA 5V DC） Rotary Product Line Travel Operating section （mm） directions Positions Changeover timing Soldering 1 2 Not specified Reflow Location lug Minimum order unit（pcs.） Japan Export 5,000 20,000 With 1.4 Horizontal Without Products No. Drawing No. SSAJ110100 1 SSAJ120100 2 Unit:mm 1 case /Japan 1 case /export packing Tape width （mm） 5,000 10,000 20,000 16 417×409×139 Reel size Small size General Use Type 1 reel Export package measurements （mm） Number of packages（pcs.） Dual-in-line Package Type Packing Specifications Taping Power Poles Big size General Use Type Refer to P111 for soldering conditions. 75 SSAJ 0.7（H）mm, 1.4mm-travel Surface Mount Type Unit:mm No. PC board mounting hole and land dimensions （Viewed from the direction A） Style Slide 5.5 Terminal No. C 2 3-0.4 Terminal No.㈰ Terminal No.㈪ Push 0.7 1.18 1.25 0.075 1.1 1.61 1.3 2 Power 2C 0. 0.1 0.6 1.2 1.4 3 0.9 A 0.9 5.1 Note the arrangement of circuit patterns Dual-in-line Package Type 0.5 0.7 ø0.7 3 6.5 Small size General Use Type 5.5 2 Terminal No. C 3-0.4 Terminal No.㈰ Terminal No.㈪ 2 0.7 0.4 1.18 2.5 1.3 2 0. C 2- 1.4 0.7 Circuit Diagram（Viewed from Direction A） C 2 0.1 0.9 5.1 0.9 Note the arrangement of circuit patterns 6.5 1 3 0.6 1.2 2 Big size General Use Type 0.6 0.6 0.6 A 76 0.6 le ho Rotary 1 0.6 .1 +0 0 2.5 .8 ø0 2- 0.4 2 0.6 1.1 1.61 Detector Dimensions Slide Switches List of Varieties SSAG SSSS7 Horizontal ● ● ● ● ● ● Vertical — — ● — — — 1-2 ● — ● ● — ● 1-3 — ● ● — ● ● 1-4 — — — — — — 2-2 — — ● — — — 2-3 — — ● — — — 2-4 — — — — — — 4-2 — — — — — — 1.4 1.5 1.5, 2 2 1.5 2 Photo Actuator direction Poles-positions Travel（mm） Automotive use −10℃ to ＋60℃ −30℃ to ＋60℃ −40℃ to ＋85℃ ̶ ̶ ̶ 10mA 5V DC 1mA 5V DC 0.3A 5V DC −40℃ to ＋85℃ ̶ ̶ Life cycle Rating（max.） （Resistive load） Rating（min.） （Resistive load） Operating life with load Load: as rating Initial contact resistance 50μA 3V DC 10,000 cycles 500mΩ max. 10,000 cycles 300mΩ max. 300mΩ max. 200mΩ max. Voltage proof 10,000 cycles 100mΩ max. 10,000 cycles 130mΩ max. 30,000 cycles （Lock side） 100,000 cycles （Recoil side） 500mΩ max. 10,000 cycles 130mΩ max. 10Ω max. 200mΩ max. 70mΩ max. 70mΩ max. 100MΩ min. 100V DC 100MΩ min. 500V DC 100V AC for 1minute 500V AC for 1minute Terminal strength Environmental performance 10,000 cycles 100mΩ max. 100,000 cycles 10Ω max. 3N for 1minute Operating direction 10N Pulling direction Cold −40℃ 96h −40℃ 500h −40℃ 96h −20℃ 500h Dry heat 85℃ 96h 85℃ 500h 85℃ 96h 85℃ 500h 40℃, 90 to 95%RH 96h 60℃, 90 to 95%RH 500h Damp heat Page Big size General Use Type Electrical Insulation resistance performance Mechanical performance Actuator strength 0.3A 4V DC Small size General Use Type Durability Operating life without load 10mA 5V DC Dual-in-line Package Type ̶ −10℃ to ＋60℃ Power Operating temperature range Rotary SSAL Push SSSS8※ Slide SSAH Detector SSAJ Series 40℃, 90 to 95%RH 96h 60℃, 90 to 95%RH 240h 60℃, 90 to 95%RH 500h 75 77 79 82 84 87 Slide Switches Soldering Conditions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 111 Slide Switches Cautions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 112 Notes 1. ※ The operating temperature range for automotive applications can be raised upon request. Please contact us for details. 2. ● Indicates applicability to all products in the series. 73 Slide Switches Soldering Conditions 200 Push Temperature (C ) A max. B D E 100 1-pole, 3-position Horizontal 1-pole, 2-position 1-pole, 3-position 2-pole, 3-position Vertical 1-pole, 2-position SSAH, SSAG, SSAJ, SSAL, SSSS8 A（℃） 3s max. C B（℃） C（s） D（℃） E（℃） F（s） 230 40 180 150 120 260 250 260 Notes Big size General Use type 1. The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board’s temperature greatly differs from that of the switch, depending on the PC board’s material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Small size General Use type SSSS7 Pre-heating F max. Dual-in-line Package Type Vertical Time (s) Power Series（Reflow type） Rotary Room temperature SSSS2 Slide 300 Detector Example of Reflow Soldering Condition 1. Heating method: Double heating method with infrared heater. 2. T emperature measurement: T hermocouple φ 0.1 to 0.2 CA（K）or CC（T）at soldering portion（copper foil surface）. A heat resisting tape should be used for fixed measurement. 3. Temperature profile Reference for Hand Soldering Series Soldering temperature Soldering time SSSF, SSSU 350±10℃ 3+1/0s SSSS2 350±10℃ 4s max. SSSS9 350±10℃ 3s max. SSAH, SSAG, SSAJ, SSAL 350±5℃ 3s max. SSSS8 330±5℃ 3s max. SSSS7 320±5℃ 3s max. SSAC 300±10℃ 2s max. Reference for Dip Soldering (For PC board terminal types) Series Items Dip soldering Preheating temperature Preheating time Soldering temperature Duration of immersion 100℃ max. 60s max. 260±5℃ 3±1s SSSS9 120℃ max. 60s max. 260±5℃ 5+0/-1s（2 times） SSSF, SSSU 100℃ max. 60s max. 260±5℃ 10±1s/5±1s SSAC 100℃ max. 60s max. 260±5℃ 5±1s SSSS2 111