A-1130 Wien Lilienberggasse 13 Tel.: +43-1-403 08 12 Fax: +43-1-408 72 13 e-mail: [email protected] http://www.knap.at Wolfgang Knap Gesellschaft m.b.H. & Co.KG 86SMX(MC) Abmessungen in mm dimensions in mm 13,0 +0 - 0,1 #4 #3 #1 #2 2,0 2,0 • • • • • the crystal type 86SMX(MC) features a low profile plastic holder with a height of only 4,2 mm low space consumption: 13 x 4,7 mm frequency range from 3,5 to 60 MHz easy oscillator design due to the fundamental oscillator mode and the low ESR the standard load capacitance is 20 pF holder type frequency range 4,3 (#2 & #3: NC) 4 3 1 2 oscillation mode frequ. tolerance at +25°C temperature stability operating temperature range storage temperature range load capacitance TO TS CL 9,4 equivalent series resistance 3,5 3,0 6,4 (1000 pcs per reel Ø330 mm) 4,0±0,1 2,0 ±0,1 +0,1 Ø1,5 - 0,0 -40 #4 #2 #3 3,57 - 3,99 MHz 4,00 - 4,99 MHz 5,00 - 5,99 MHz 6,00 - 6,99 MHz 7,00 - 8,99 MHz 9,0 - 12,9 MHz 13,0 - 19,9 MHz 20,0 - 33,9 MHz ±100 ppm -10/+60°C 100 Ω C0 7,0 pF max. drive level P 0,1 mW max. Δf/F ±5ppm per year max. at +25°C aging 11,5±0,1 insulation resistance 24,0 40 Ω 500 MΩ min. at 100V DC ±0,3 4,3 ±0,1 -60 #1 200 Ω 150 Ω 120 Ω 100 Ω 80 Ω 60 Ω 50 Ω 40 Ω 32,0 - 50 MHz BT fund. shunt capacitance 1,75±0,1 3° max. ±0,1 RS max. 3,0 tape specification 86SMX(MC) 13,1 3,579 - 40 MHz AT fund. Δf/F Δf/F soldering patterns 0,4 ±0,05 86SMX(MC) 32,0 - 60 MHz AT 3rd ±50 ppm ±50 ppm -20/+70°C -40°C to +90°C 20 pF typ. F 1,2 1,8 1,2 9,4 4,7 +0 - 0,1 1,8 4,2+0 - 0,2 • 2,0 1,5 2,0 • • • die Quartztype 86SMX(MC) hat ein Plastikge-häuse niedriger Bauhöhe von nur 4,2 mm geringer Platzbedarf: 13 x 4,7 mm Frequenzbereich von 3,5 bis 60 MHz die Schwingungsart Grundwelle und der niedrige ESR erleichtert das Oszillatordesign die Standardlastkapazität beträgt 20 pF 0,15 • SM-Quartz / SM-crystal 5,3 ±0,1 AT-Cut -20 0 12,0±0,1 reflow soldering condition Ø2,2 ±0,1 Temperature (°C) +20 +40 +60 +80 +100 +80 +60 +40 +20 Δf/f (ppm) 0 -20 -40 -60 -80 -100 TR 10 seconds max. at +255°C ±5°C moisture sensitivity level MSL1 typischer Temperaturverlauf der Frequenzabweichung -60 -40 BT-Cut -20 0 Temperature (°C) +20 +40 +60 +80 +100 0 -20 -40 -60 Δf/f (ppm) -80 -100 -120 -140 -160 -180 -200 typical temperature characteristics of the frequency tolerance Standardfrequenzen - frequency designators Bestellbezeichnung / order code 86 M 147 - 16 (MC) holder type package type circuit calibration load capacitance (CL) frequency designator Beispiele / examples Oszillatorschaltung circuit cal. cond. parallel res. 16pF series res. Frequenz frequency 14,7456 MHz 20,0000 MHz Gehäuse holder type 86SMX(MC) 86SMX(MC) SMI-Bestellnr. SMI part no. 86M147-16(MC) 86S200(MC) Seite - 29 - f (MHz) 3,579545 3,686400 4,000000 4,096000 4,194304 4,433619 4,608000 4,915200 5,000000 5,068800 5,120000 6,000000 6,144000 6,400000 7,372800 7,680000 8,000000 designator 035 0368 040 0409 041 044 046 049 050 0506 0512 060 061 064 073 0762 080 f (MHz) 8,192000 9,216000 9,830400 10,000000 10,240000 11,059200 12,000000 12,288000 13,560000 14,318180 14,745600 15,000000 15,360000 16,000000 16,384000 18,432000 19,200000 designator 081 092 098 100 1024 1105 120 122 1356 143 147 150 1536 160 163 184 192 f (MHz) 19,660800 20,000000 20,480000 22,118400 24,000000 24,576000 25,000000 27,000000 29,491200 30,000000 32,000000 33,868800 36,000000 39,321600 40,000000 40,320000 50,000000 designator 196 200 204 221 240 245 250 270 294 300 320 338 360 3rd 393 BT 400 BT 403 3rd 500 3rd Ausgabedatum: 07-01-11