SURFACE MOUNT MICROPROCESSOR CRYSTAL SERIES AS-4PD FEATURES EXCELLENT CLOCK SIGNAL GENERATOR FOR CPU’s AVAILABLE IN EXTENDED TEMPERATURE RANGE LOW PROFILE SURFACE MOUNT EPSON MA506 PIN OUT COMPATIBLE SPECIFICATIONS FREQUENCY RANGE 3.20 MHz TO 70.00 MHz FUNDAMENTAL 3.20 MHz TO 40.320 MHz THIRD OVERTONE 24.576 MHz TO 70.00 MHz MODE OF OSCILLATION FREQUENCY TOLERANCE AT 25°C ±30 PPM TYPICAL ±50 PPM MAXIMUM FREQUENCY STABILITY OVER TEMPERATURE RANGE ±50 PPM TYPICAL ±100 PPM MAXIMUM -20º C TO +70º C STANDARD OPERATING TEMPERATURE RANGE -40º C TO +85º C EXTENDED STORAGE TEMPERATURE RANGE -55º C TO +125º C AGING ±5 PPM PER YEAR MAXIMUM LOAD CAPACITANCE 10 pF TO 32 pF OR SERIES EQUIVALENT SERIES RESISTANCE (ESR) SEE TABLE DRIVE LEVEL 0.1 mW TYPICAL CRYSTAL CUT AT STRIP TYPICAL FREQUENCIES AND ESR CHARACTERISTICS FREQUENCY (MHz) OHMS MAX MODE 3.579545 TO 4.000 180 FUND 4.000 TO 4.900 150 FUND 5.000 TO 6.900 100 FUND 7.000 TO 14.900 50 FUND 15.000 TO 23.900 40 FUND 24.000 TO 36.000 30 FUND 25.000 TO 40.000 40 FUND 30.000 TO 60.000 100 3rd OT PART NUMBERING SYSTEM HOLDER TYPE FREQUENCY - AS HC-49/S SMD LOAD CAPACITANCE - IN MHz 10 TO 32pF FOR PARALLEL S FOR SERIES MODE - FUND 3OT FUNDAMENTAL THIRD OVERTONE - EXTENDED TEMPERATURE EXT CONFIGURATION 4PD 4 PAD SMD TYPE TAPE AND REEL TR Raltron Electronics 10400 NW 33rd Street Miami, Florida 33172 U.S.A. Tel: 305-593-6033 Fax: 305-594-3973 e-mail: [email protected] Internet: http://www.raltron.com SURFACE MOUNT MICROPROCESSOR CRYSTAL OUTLINE DRAWING NOTE: Pin orientation is controlled by plastic base. Marking orientation should not be used to identify pin orientation. 13.0 MAX 4.73 MAX .186 MAX .512 MAX MARKING 5.0 MAX .197 MAX 11.4 MAX .449 MAX 3 1 2 1.20 .047 2.0 4 .079 9.0 ± 0.3 .354 ± .012 mm Scale none Dimensio n in inch RECOMMENDED SOLDER PATTERN 9.0 2.2 2.3 1.5 DIA ± 0.1 2.0 ± 0.1 .079 ± .004 4.0 ± 0.1 .157 ± .004 NOTE: Units to be oriented in tape with PIN 1 nearest to sprocket holes 24.0 ± 0.3 .945 ± .008 .059 DIA ± .004 1.75 ± 0.1 .069 ± .004 11.5 ± 0.1 .453 ± .004 2.3 .090 .090 CARRIER TAPE DIMENSIONS 330 mm REEL DIAMETER 24 mm TAPE WIDTH 12 mm PITCH 1000 PIECES PER REEL .085 3.5 .139 2.2 .085 .354 1.6 DIA ± 0.1 .063 DIA ± .004 12.0 ± 0.1 .472 ± .004 5.5 ± 0.1 .216 ± .004 REFLOW SOLDERING PROFILE May 2013 rd Raltron Electronics 10400 NW 33 Street Miami, Florida 33172 U.S.A. Tel: 305-593-6033 Fax: 305-594-3973 e-mail: [email protected] Internet: http://www.raltron.com