This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC FILTER (CERAFIL®) For FM Receivers SFE10.7/SFT10.7/CDA10.7 Series CERAMIC FILTER (CERAFIL®) Murata Manufacturing Co., Ltd. Cat.No.P61E- 5 . This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 !Index !Introduction ............................................................................................................ 1 !For FM Receiver SFE10.7 Series ....................................................................... 2Y4 !For FM Receiver Chip Type SFECV10.7 Series ................................................ 5Y6 !Wide Bandwidth / Narrow Bandwidth Type SFE10.7 Series ................................ 7 !Low Loss Type A10 Series ..................................................................................... 8 !Low Profile Type C10 Series .................................................................................. 9 !3-element Type SFT10.7 Series ........................................................................... 10 !For Stereo Tuners SFE10.7 Series ................................................................ 11Y12 !For FM Detection CDA10.7 Series ................................................................ 13Y15 !For FM Detection Chip Type CDACV10.7 Series .......................................... 16Y18 !Example of applied circuit ............................................................................. 19Y20 !ISO9000 CERTIFICATIONS Manufacturing plants of these products in this catalog have obtained the ISO9002 quality system certificate. Plants Certified Date *1 Himi Murata Manufacturing Co., Ltd. Jul. 29. 1992 RCJ Taiwan Murata Electronics Co., Ltd. Nov. 26. 1993 BCIQ *2 *1 RCJ : Reliability Center for Electronic Components of Japan *2 BCIQ : Bureau of Commodity Inspection and Quarantine 2 Organization Registration No. RCJ-86M-07 5E8Y001-00 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 Introduction FM-broadcasting generally has high fidelity and a high S/N ratio. In Europe and North America, there is a particularly large number of FM-broadcasting stations. The performance of FM-receivers is, therefore, greatly dependent on the characteristics of the intermediate frequency filter (selectivity, waveform symmetry, group delay time, etc.). Murata's ceramic filter SFE 10.7/SFT 10.7 Series for FMreceivers are monolithic type ceramic filters which use the energy trapped thickness vibration-mode of the piezoelectric ceramic. Ceramic filters are compact and of simple structure, with high selectivity, excellent temperature and environmental characteristics, and favorable waveform symmetry. Because of these excellent features, Murata's ceramic filter has stable receiving performance. In recent years, FM-receiver technology has progressed rapidly; ¡Electronic tuners have replaced mechanical tuners. ¡Tuners have progressively been given higher selectivity and better functions for car-radio receivers. ¡High fidelity characteristics have rapidly improved for home audio equipment. ¡One-chip, non-adjustment ICs have been developed. ¡Compact and low profile because of many chip components used (e. g. for headphone audio). ¡Automatic insertion technology for taped components has progressed. Various types of ceramic filters for FM receivers (SFE 10.7/SFT 10.7 series) are available to meet the needs of divers types of FM receivers. !NOTICE ¡Matching condition should be evaluated to perform stable electrical characteristics which are specified ¡Covering filter with over coat,conditions,such as material of resin cure temperature and so on be evaluated well. ¡Conformal coating of filter is not acceptable due to unsealed construction. ¡Filter might be damaged when an excess stress will be applied. ¡We can no warrant against defects caused by any use of the filter which deviates from the intended use as described in this catalog. Please contact us for any other characteristics, using conditions or application to the device which need to be extremely reliable. !Part Numbering(*Please specify the part numbers when ordering.) (Ex.) SF E q w 10.7M A5 e r H t Y Z y qApplication, Function. wAppearance, Shape, Dimensions E : 2 section filter on I wafer T : 3 section filter on I wafer eCenter Frequency "M"is added at the end when unit is MHz. ex.) 10.7MHz / 10.7 M rRating, Characteristics. (Customers Specifications) tTolerance of Center Frequency T30kHZ T25kHZ T20kHZ yRank of Center Frequency Code D B A C E Z M 25kHz Step 30kHz Step 10.650MHzT25kHz 10.64MHzT30kHz 10.675MHzT25kHz 10.67MHzT30kHz 10.700MHzT25kHz 10.70MHzT30kHz 10.725MHzT25kHz 10.73MHzT30kHz 10.750MHzT25kHz 10.76MHzT30kHz Combination A, B, C, D, E Combination A, B, C ¡Two center-frequency series are available : 30kHz step and 25kHz No Code H K step. The 25kHz series is designated by the letter "H" at the end of the part number. Ex : SFE10.7MS3H-A ¡Center frequency series T20kHz step is available for synthesizer tuners. These are designated by the letter "K" at the end of the part number. Ex : SFE10.7MS3K-A 1 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC FILTER *CERAFIL® is the Registered Trademark of Murata's Ceramic Filters. For FM Receiver SFE10.7 Series !FEATURES 1. These miniature filters have high mechanical strength. 2. Low loss, favorable waveform symmetry, and high selectivity 3. Various band widths are available for applications in wide to narrow bands. 4. Small dispersion and stable characteristics. MA5-A 5. Change in center frequency is typically within T30ppm/D MS2-A MS3-A at Y20 to W80D. 6. High reliability. !DIMENSIONS 7.0T2.0 7.0T2.0 E10.7 * * 5.0T1.0 1.38T0.2 1.7T0.1 0.3T0.1 0.5T0.1 e w 3.0T1.0 2.5 2.5 T0.2 T0.2 q (in mm) !MEASURING CIRCUIT R1 q w e RF Voltmeter Rg SSG R2 C2 qInput wGround eOutput RgWR1=R2=330Ω C2=10pF (Including stray capacitance and capacitance of RF voltmeter) !SPECIFICATIONS Part Number 3dB Band Width (kHz) 20dB Band width (kHz) max. Insertion Loss (dB) Spurious Attenuation (9–12MHz) (dB) min. SFE10.7MA5-Z 280T50 650 (520) 6 (4) 30 (43) SFE10.7MS2-Z 230T50 600 (420) 6 (4) 40 (45) SFE10.7MS3-Z 180T40 520 (380) 7 (4.5) 40 (45) ¡Input/output matching impedance : 330Ω 2 ( )Typ.value This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 !FREQUENCY CHARCTERISTICS 0.8 3 0.6 4 0.4 5 0.2 6 0 10.5 10.6 10.7 10.8 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 7 10.9 10.5 10.6 Frequency (MHz) 0.6 4 0.4 5 0.2 0 6 7 10.9 10.5 10.6 0 10 10 10 30 40 50 70 20 30 40 50 70 SFE10.7MA5-A SFE10.7MS2-A 10 10 50 60 9.7 10.7 11.7 Frequency (MHz) 20 30 40 50 60 70 8.7 12.7 Attenuation (dB) 10 Attenuation (dB) 0 40 30 40 50 9.7 10.7 11.7 Frequency (MHz) 10.2 10.7 11.2 Frequency (MHz) SFE10.7MS3-A 0 30 20 70 10.2 10.7 11.2 Frequency (MHz) 0 20 10.9 60 60 10.2 10.7 11.2 Frequency (MHz) 10.8 SFE10.7MS3-A 0 20 10.7 Frequency (MHz) SFE10.7MS2-A 60 70 8.7 0.8 3 0 Attenuation (dB) Attenuation (dB) 10.8 1.0 2 Frequency (MHz) SFE10.7MA5-A Attenuation (dB) 10.7 1.2 1 Attenuation (dB) 7 1 0 Group Delay Time (µsec.) 2 1.2 Attenuation (dB) 1.0 Attenuation (dB) 1 SFE10.7MS3-A 0 Group Delay Time (µsec.) SFE10.7MS2-A 1.2 Group Delay Time (µsec.) Attenuation (dB) SFE10.7MA5-A 0 20 30 40 50 60 70 8.7 12.7 9.7 10.7 11.7 Frequency (MHz) 12.7 !SPURIOUS RESPONSE SFE10.7MA5-A Attenuation (dB) 0 10 20 30 40 50 60 70 0 20 40 60 80 Frequency (MHz) 100 !TEMPERATURE CHARACTERISTICS SFE10.7MS2-A Variation (kHz) 0 Y20 Y20 0 W20 W40 Temperature (D) W60 0 Y1 Y2 W40 Y20 0 W20 W40 Temperature (D) W60 0 Y20 Y20 0 W20 W40 Temperature (D) W60 W80 0 W20 W40 Temperature (D) W60 W80 W60 W80 W60 W80 Insertion loss 0 Y1 W40 3dB Band width Y20 W1 Y2 W80 W20 Y40 0 Y20 W2 Insertion loss W1 Center frequency W20 Y40 W80 Variation (kHz) W2 Variation (kHz) Center frequency W20 Y40 Variation (kHz) SFE10.7MS3-A W40 Variation (kHz) Variation (kHz) W40 Y20 0 W20 W40 Temperature (D) 3dB Band width W20 0 Y20 Y40 Y20 0 W20 W40 Temperature (D) 3 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 !MATCHING CONDITIONS ¡When using ceramic filters, it is most important to match the input/output load to impedance 330Ω (pure resistance). Waveform symmetry is damaged when reactance is added to the input/output load. ¡Two ceramic filters directly connected can be used for high selectivity. For reducing waveform variation, it is recommended to input a buffer AMP between ceramic filters. ¡The SFE 10.7 and SFT 10.7 series are of input/output symmetric structure so that in theory there is no input/output directionality. Actual circuits may use different input/output loading conditions (for example, mismatched impedance) or capacitance load. In such cases, the waveform will be a little changed by the direction of the input/output of the ceramic filters. Load resistance and waveform of SFE10.7MS2-A (Rg W R1 = 330Ω) 1.2 1 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 10.5 10.6 10.7 10.8 Frequency (MHz) 1.2 1 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 7 10.9 10.5 1.2 1 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 10.5 10.6 10.7 10.8 Frequency (MHz) Attenuation (dB) 0 7 10.9 R2= 1kΩ Group Delay Time (µsec.) Attenuation (dB) R2= 560Ω 10.6 10.7 10.8 Frequency (MHz) 0 1.2 1 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 7 10.9 10.5 10.6 10.7 10.8 Frequency (MHz) Group Delay Time (µsec.) 7 0 Group Delay Time (µsec.) 0 Attenuation (dB) R2= 330Ω Group Delay Time (µsec.) Attenuation (dB) R2= 220Ω 10.9 Loaded capacitance and waveform for SFE10.7MS2-A (R1 W Rg = R2 = 330Ω) 1.2 1 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 10.5 10.6 10.7 10.8 Frequency (MHz) 1.2 1 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 7 10.9 10.5 1.2 1 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 Attenuation (dB) 0 7 10.9 C2= 82pF Group Delay Time (µsec.) Attenuation (dB) C2= 56pF 10.6 10.7 10.8 Frequency (MHz) 0 1.2 1 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 7 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 Group Delay Time (µsec.) 7 0 Group Delay Time (µsec.) 0 Attenuation (dB) C2= 33pF Group Delay Time (µsec.) Attenuation (dB) C2= 10pF This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC FILTER *CERAFIL® is the Registered Trademark of Murata's Ceramic Filters. Chip Ceramic Filter SFECV10.7 Series Contributing to the Reduction of AM/FM IF Circuit The chip CERAFIL® SFECV series is high performance filter compare to the conventional series (SFECA). Together with the PFWCC455 filter series for AM, the SFECV10.7 filter series reduces the size of IF circuit in AM/FM radios. !FEATURES 1. Super-thin. Only 1.5mm. The most suitable ceramic filter available for thinning substrates. 2. Heat resistant. Reflow soldering can be performed because of its excellent heat resistance. 3. The piezoelectric element is connected in the sandwich shape by heat heat resistant substrates, thus it has excellent mechanical strength, and it is suitable for automatic mounting. 4. Various band-widths are available. Select a suitable type in accordance with the desired selectivity. 5. Electrical characteristics are the same as conventional Cerafil ®. !APPLICATIONS 1. Small, thin radios 3. CAR radios 2. Headphone stereos !DIMENSIONS !FREQUENCY CHARACTERISTICS 6.9T0.3 4.05T0.4 1.2T0.3 1.2T0.5 SFECV10.7MA5-A 1.2T0.5 1.2T0.3 B 30 (3) 40 50 60 70 8.700 * (2) (1) 1.5T0.2 Attenuation (dB) 20 ** 2.9T0.3 0 10 (1) , (3) : Input/Output (2) : Ground * : EIAJ Monthly Code ** : Rank 1.0T0.5 9.700 10.700 11.700 1.0T0.5 1.0T0.5 12.700 Frequency (MHz) (in mm) SFECV10.7MS2-A !DIMENSIONS OF PLASTICS TAPE 0 1.5 20 φ1.5W0.1 Y0.0 4.0T0.1 2.0T0.05 12.0 50 12.0 5.5T0.05 7.3T0.1 40 W0.08 Y0.2 30 Frequency (MHz) 11.700 12.700 Peeling of strength 0.1Y0.7N Cover Tapes Chip Filter 4.0T0.3 3.3T0.1 3°max. 10° 1.9T0.1 10.700 0.05 1.7 9.700 W0.1 70 8.700 1.7Y0.05 60 0.3T0.05 Attenuation (dB) 10 User direction of feel Packaging Quantity : 2000 pcs / reel (φ180mm) (in mm) 5 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 !SPECIFICATIONS Part Number SFECV10.7MA5-Z Char. SFECV10.7MS2-Z SFECV10.7MS3-Z SFECV10.7MJ-Z A : 10.700MHzT30kHz max. B : 10.670MHzT30kHz max. D : 10.640MHzT30kHz max. C : 10.730MHzT30kHz max. E : 10.760MHzT30kHz max. Provided that the center point of 3dB band width should be the center frequency and identified by the letters : A, B, C, D or E Center Frequency(f0) 3dB Pass Band Width 280T50kHz 230T50kHz 180T40kHz 150T40kHz 20dB Attenuation Band Width 590kHz max. 510kHz max. 470kHz max. 380kHz max. 3.0T2.0dB 3.5T2.0dB 4.0T2.0dB 5.5T2.0dB 35dB mn. 35dB min. 35dB min. 35dB min. Insertion Loss Spurious Attenuation (9-12 MHz) Input/Output Matching Impedance 330Ω !APPLICATIONS (3) Cleaning conditions (1) Standard Land Dimensions Please avoid cleaning this chip ceramic filter with vapor or immersion because this type is not perfectly shielded. SFECV10.7 1.2 1.2 4.0 1.2 1.65 1.65 2.85 2.85 (in mm) (2) Soldering Conditions ¡Standard soldering conditions Reflow Solder 5sec. Temperature (D) 240 230 Gradual cooling 150 60 30 Time(sec.) ¡Soldering with iron Soldering conditions : Soldering iron temperature 300D Soldering time less than 3 seconds. Note : Please solder this chip ceramic filter so that the soldering iron should not touch the chip body directly. 6 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC FILTER *CERAFIL® is the Registered Trademark of Murata's Ceramic Filters. Wider/Narrow Band-width Type SFE10.7 Series !FEATURES 1. Realizes wider or narrower band characteristics not obtained by conventional ceramic filters. 2. Temperature characteristics are the best available, the same as those of Murata's conventional ceramic filters. Thus, even in the case of narrow band filters, the center frequency is stable even if temperature changes. MA19 MA20-A MHY-A MT MV !DIMENSIONS 7.0T2.0 E10.7 E10.7 7.0T2.0 7.0T2.0 e w 0.5T0.1 3.0T1.0 2.5 2.5 T0.2 T0.2 5.0T1.0 0.5T0.1 1.38T0.2 1.7T0.1 q 2.5 2.5 T0.2 T0.2 e w 3.0T1.0 5.0T1.0 1.38T0.2 1.7T0.1 * * 0.3T0.1 * * 0.3T0.1 MT/MV 7.0T2.0 MA19/MA20-A/MHY-A q (in mm) !SPECIFICATIONS Part Number SFE10.7MA19 SFE10.7MA20-A SFE10.7MHY-A 3dB Band Width (kHz) 20dB Band Width (kHz) max. Insertion Loss (dB) Spurious Attenuation (9Y12MHz) (dB) 350 min. (450) 950 max. (750) 3T2 20 min. (30) 330T50 680 max. (615) 4T2 30 min. (40) 110T30 350 max. (260) 7T2 30 min. (42) SFE10.7MT T25kHz min. (82) 200 max. (160) 6.5T2.5 30 min. (48) SFE10.7MV T13kHz min. (56) 135 max. (110) 6T2 30 min. (41) ¡Input/output matching impedance : 330Ω (MA20-A, MHY-A, MT, MV), 470Ω (MA19) ( )Typ.value !FREQUENCY CHARACTERISTICS SFE10.7MHY-A SFE10.7MV 0 10 10 10 20 30 40 50 20 30 40 50 Attenuation (dB) 0 Attenuation (dB) Attenuation (dB) SFE10.7MA19 0 20 30 40 50 60 60 60 70 10.2 10.7 11.2 Frequency (MHz) 70 10.2 10.7 11.2 Frequency (MHz) 70 10.2 10.7 11.2 Frequency (MHz) 7 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC FILTER *CERAFIL® is the Registered Trademark of Murata's Ceramic Filters. -A10 Series Low Loss Type SFE10.7- !FEATURES 1.Insertion loss is 1Y1.5dB lower than conventional products. This types are useful for elevating the sensitivity of sets. 2. Excellent shape factor of frequency response. 3. Good wareform symmetry. SFE10.7MA5A10-Z 280T50 590 (480) 2.5T2.0 Spurious Attenuation (9Y12MHz) (dB) min. 30 (42) SFE10.7MS2A10-Z 230T50 520 (400) 3.0T2.0 35 (43) SFE10.7MS3A10-Z 180T40 470 (360) 3.5T1.5 35 (43) SFE10.7MJA10-Z 150T30 360 (290) 4.0T2.0 35 (44) 3dB Band Width 20dB Band Width Insertion Loss Part Number (kHz) (kHz) max. (dB) ¡Input/output matching impedance : 330Ω ( MA5A10-A MS2A10-A MS3A10-A MJA10-A !DIMENSIONS 7.0T2.0 10.7 )Typ.value A 7.0T2.0 !SPECIFICATIONS * * 5.0T1.0 1.38T0.2 1.7T0.1 2.5 2.5 T0.2 T0.2 3.0T1.0 0.3T0.1 0.5T0.1 e w q (in mm) !FREQUENCY CHARACTERISTICS 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 7 10.5 10.6 10.7 10.8 10.9 0 1.2 1 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 7 10.5 Frequency (MHz) 10 10 20 30 40 50 60 10.8 10.9 20 30 40 50 60 10.7 Frequency (MHz) 8 10.7 SFE10.7MJA10-A 0 Attenuation (dB) Attenuation (dB) SFE10.7MS3A10-A 0 70 10.2 10.6 Frequency (MHz) 11.2 70 10.2 10.7 Frequency (MHz) 11.2 Group Delay Time (µsec.) 1 Attenuation (dB) SFE10.7MJA10-A 1.2 Group Delay Time (µsec.) Attenuation (dB) SFE10.7MS3A10-A 0 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC FILTER *CERAFIL® is the Registered Trademark of Murata's Ceramic Filters. -C10 Series Low Profile Type SFE10.7- !FEATURES 1. Installed height is 5 mm, making it well suited for compact, thin sets. 2. Electrical characteristics and performance are the same as those of the ceramic filter SFE 10.7 series. !SPECIFICATIONS SFE10.7MA5C10-Z 280T50 650 (546) 3.0T2.0 Spurious Attenuation (9Y12MHz) (dB) min. 30 (47) SFE10.7MS2C10-Z 230T50 570 (474) 3.0T2.0 40 (48) SFE10.7MS3C10-Z 180T40 470 (360) 3.5T2.0 35 (45) 3dB Band Width 20dB Band Width Insertion Loss (kHz) (kHz) max. (dB) Part Number MA5C10-A MS2C10-A MS3C10-A !DIMENSIONS 7.0T2.0 ( )Typ.value 10.7 6.0 max. ¡Input/output matching impedance : 330Ω ** C 1.5 5.0T1.0 1.3T0.1 0.3T0.1 0.5 2.5T0.2 3.0T1.0 2.5T0.2 e w q (in mm) !FREQUENCY CHARACTERISTICS 3 0.6 4 0.4 5 0.2 6 0 10.5 10.6 10.7 10.8 10.9 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 7 10.5 10.6 Frequency (MHz) 10.7 10.8 10.9 1.2 1 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 0 7 10.5 SFE10.7MA5C10-A SFE10.7MS2C10-A 10 10 10 20 20 20 50 60 Attenuation (dB) 0 40 30 40 50 60 10.7 Frequency (MHz) 11.2 70 10.2 10.8 10.9 SFE10.7MS3C10-A 0 30 10.7 Frequency (MHz) 0 70 10.2 10.6 Frequency (MHz) Attenuation (dB) 7 1 0 Group Delay Time (µsec.) 0.8 1.2 Attenuation (dB) 2 SFE10.7MS3C10-A 0 Group Delay Time (µsec.) 1.0 Attenuation (dB) 1 Group Delay Time (µsec.) SFE10.7MS2C10-A 1.2 Attenuation (dB) Attenuation (dB) SFE10.7MA5C10-A 0 30 40 50 60 10.7 Frequency (MHz) 11.2 70 10.2 10.7 11.2 Frequency (MHz) 9 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC FILTER *CERAFIL® is the Registered Trademark of Murata's Ceramic Filters. 3-element Type SFT10.7 Series !FEATURES 1. It has an excellent shape factor, and it is possible to obtain 1.5 times more excellent selectivity than SFE 10.7 series(by detuningT300 or 400kHz). 2. Good performance of spurious suppression. 3. Having the same terminal pitch as the SFE 10.7 series, it easily replaces that series. 4. By replacing two SFE 10.7 series filters with one SFT 10.7 filter,more compact sets can be made. 5. Well-suited for 1-chip ICs. MA5-A !SPECIFICATIONS 50 (60) SFT10.7MS3-Z 180T40 550 (500) 8T2 50 (60) ¡Input/output matching impedance : 330Ω ¡SFT10.7 series is good to replace with ¡SFE10.7 series because of its higher selectivity. T10.7 ** 0.4T0.1 0.65T0.1 1.4T0.1 0.5T0.1 )Typ.value 0.3T0.1 ( 6.0T1.0 6T2 5.0T1.0 650 (580) 10.0T1.0 2.5T0.2 2.5T0.2 3.0T1.0 230T40 MS3-A !DIMENSIONS Spurious Attenuation 3dB Band Width 40dB Band Width Insertion Loss Part Number (9Y12MHz) (kHz) (kHz) max. (dB) (dB) min. SFT10.7MA5-Z 280T50 700 (630) 6T2 50 (60) SFT10.7MS2-Z MS2-A e w q (in mm) !FREQUENCY CHARACTERISTICS 0.6 4 0.4 5 0.2 6 0 7 10.5 10.6 10.7 10.8 2 0.8 3 0.6 4 0.4 5 0.2 6 0 7 10.9 10.5 Frequency (MHz) 10.8 10.9 2 0.8 3 0.6 4 0.4 5 0.2 6 7 10.2 0 10 10 0 20 20 10 40 50 60 70 80 8.7 9.7 10.7 11.7 Frequency (MHz) 12.7 Attenuation (dB) 0 30 30 40 50 60 70 80 8.7 10.4 10.6 10.8 11.0 Frequency (MHz) 11.2 20 30 40 50 60 9.7 10.7 11.7 Frequency (MHz) 12.7 70 8.7 9.7 10.7 11.7 Frequency (MHz) 1.2 1 1.0 2 0.8 3 0.6 4 0.4 5 0.2 6 7 10.2 0 10.4 10.6 10.8 Frequency (MHz) SFT10.7MS2-A Spurious Response SFT10.7MS3-A 0 Attenuation (dB) Attenuation (dB) 10.7 1.0 Frequency (MHz) SFT10.7MS2-A 10 10.6 1 0 12.7 11.0 11.2 Group Delay Time (µsec.) 3 1.0 1.2 Attenuation (dB) 0.8 1 SFT10.7MS3-A 0 Group Delay Time (µsec.) 2 1.2 Attenuation (dB) 1.0 SFT10.7MS2-A 0 Group Delay Time (µsec.) 1 Attenuation (dB) SFT10.7MS3-A 1.2 Group Delay Time (µsec.) Attenuation (dB) SFT10.7MS2-A 0 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC FILTER *CERAFIL® is the Registered Trademark of Murata's Ceramic Filters. For Stereo Tuners (G. D. T. Waveform Control Product) SFE10.7 Series MX Series MX2-A MZ1-A MZ2-A ML-A MP3-A MM-A MA8-A MS2G-A MS3G-A !DIMENSIONS 7.0T2.0 E10.7 E10.7 2.5 2.5 T0.2 T0.2 e w 5.0T1.0 0.5T0.1 1.38T0.2 1.7T0.1 0.5T0.1 q 2.5 2.5 T0.2 T0.2 e w 3.0T1.0 1.38T0.2 1.7T0.1 * * 0.3T0.1 * * 7.0T2.0 SFE10.7ML/MA8 Series 9.0 max. 11.0 max. SFE10.7MX Series 5.0T1.0 1. Little dispersion of amplitude characteristics and phase characteristics(G. D. T. characteristics) 2. The SFE 10.7 MX series has G.D.T characteristics and is useful for obtaining low distortion. SFE 10.7 ML series, in these ceramic filters, being in harmony with flatness of G.D.T., roundness of the amplitude and selectivity characteristics, therefore, these ceramic filters are suitable to high-grade stereo tuners. Even if mismatching condition, they can keep little distortion because of low Qm of ceramic material. The SFE 10.7 MA8 series is based on SFE 10.7 MA5/MS2 /MS3, and it obtains high selectivity with low loss. There is little dispersion of amplitude and G.D.T. characteristics, and low distortion rate can be obtained. 3. All products are inspected for symmetry and roundness of amplitude characteristics, and the flatness of G.D.T. characteristics. 4.0 max. !FEATURES MA8 Series 0.3T0.1 MX-A ML Series q (in mm) !SPECIFICATIONS Char. Part Number SFE10.7MX-Z MX Series ML Series MA8 Series 3dB Band Width (kHz) 20dB Band Width (kHz) max. Insertion Loss (dB) max. 250T40 670 (620) 12 (10) Spurious Attenuation. min. 25 (33) G. D. T. Band Width (kHz) min. Deviation : 0.2µ sec. max. (Within of T110kHz) Deviation : 0.15µ sec. max. (Within of T80kHz) Deviation : 0.15µ sec. max. (Within of T60kHz) Deviation : 0.15µ sec. max. (Within of T50kHz) SFE10.7MX2-Z 220T40 610 (560) 12.5 (10.5) 30 (37) SFE10.7MZ1-Z 180T30 530 (460) 14 (12.3) 33 (38) SFE10.7MZ2-Z 150T30 500 (420) 14 (12.6) 35 (41) SFE10.7ML-Z 280T50 650 (610) 9 (7) 25 (33) 0.25µsec. f0T70 (T105) kHz SFE10.7MP3-Z 250T50 650 (550) 10 (8) 30 (35) 0.25µsec. f0T65 (T90) kHz SFE10.7MM-Z 230T50 600 (510) 11 (9) 30 (38) 0.25µsec. f0T60 (T85) kHz SFE10.7MA8-Z 280T50 650 (520) 6 (4) 30 (43) 0.5µsec. f0T80 (T100) kHz SFE10.7MS2G-Z 230T50 600 (420) 7 (4.5) 40 (45) 0.5µsec. f0T60 (T75) kHz SFE10.7MS3G-Z 180T40 520 (380) 9 (5) 40 (45) 0.5µsec. f0T45 (T60) kHz ¡Input/output matching impedance : 330Ω ( )Typ.value 11 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC FILTER *CERAFIL® is the Registered Trademark of Murata's Ceramic Filters. For Stereo Tuners (G. D. T. Waveform Control Product) SFE10.7 Series !FREQUENCY CHARACTERISTICS ¡MX series SFE10.7MX-A SFE10.7MX2-A 3 0 10.6 10.7 10.8 0.5 3 0 10.9 10.5 Frequency (MHz) SFE10.7MZ1-A Attenuation (dB) 0 10.8 10.9 0 Group Delay Time (µsec.) Attenuation (dB) 3 10.7 10.8 SFE10.7MZ2-A 0.5 10.6 10.7 Frequency (MHz) 0 10.5 10.6 0.5 3 0 10.9 10.5 Frequency (MHz) 10.6 10.7 10.8 Group Delay Time (µsec.) 10.5 Attenuation (dB) 0.5 Group Delay Time (µsec.) 0 Group Delay Time (µsec.) Attenuation (dB) 0 10.9 Frequency (MHz) ¡ML series SFE10.7ML-A SFE10.7MP3-A SFE10.7MM-A 10.5 10.6 10.7 10.8 0 10.9 10.5 10.6 10.7 10.8 Attenuation (dB) 0.5 3 0.5 3 0 10.9 10.5 10.6 10.7 10.8 Frequency (MHz) Frequency (MHz) Frequency (MHz) SFE10.7MA8-A SFE10.7MS2G-A SFE10.7MS3G-A Group Delay Time (µsec.) 0 0 Group Delay Time (µsec.) 0.5 3 Attenuation (dB) 0 Group Delay Time (µsec.) Attenuation (dB) 0 10.9 ¡MA8 series 10.5 10.6 10.7 10.8 Frequency (MHz) 12 10.9 0 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 Attenuation (dB) 0.5 3 0.5 3 0 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 Group Delay Time (µsec.) 0 0 Group Delay Time (µsec.) 0.5 3 Attenuation (dB) 0 Group Delay Time (µsec.) Attenuation (dB) 0 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC DISCRIMINATOR Ceramic Discriminator CDA10.7 Series For FM Detection Well-suited for Miniaturization without Adjustment In conformity with trends for higher performance audio devices, demand has grown for non-adjustment, single chip ICs. Murata's ceramic discriminator CDA10.7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in wide bandwidths. MC1-A !FEATURES !DIMENSIONS * * 10.7 0.4T0.1 0.65T0.1 5.0T0.2 3.0T1.0 0.3T0.1 0.5T0.1 5.0T1.0 8.0T1.0 5.0T1.0 1. Compact and excellent mechanical strength. 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. The MG type for wide bandwidths and the MC type for narrow bandwidths are available. 5. Stable temperature characteristics. 6. We recommend kits : ceramic discriminator CDA10.7 series and Cerafil® SFE10.7 of the same frequency rank. MG1-A (in mm) !SPECIFICATIONS Demodulation Output (mV) at f0 Distortion Factor (%) max. at f0 Demodulation 3dB Band width (kHz) min. Detection System CDA10.7MG1-Z 25 min. 1.0 (0.1) 345 (500) Quadrature CDA10.7MG16-Z 60Y90 min. 0.9 (0.5) 300 (370) Quadrature CDA10.7MG48-Z 700 min. 1.0 (0.2) 400 (560) Quadrature Part Number CDA10.7MC1-Z 35 min. 1.0 (0.2) 242 (370) Quadrature IC CX20029 CX20111 TA8122AN/AF LA1835 CXA1019M CX20091 ( * Input signal conditions CDA10.7MG1-Z : Input Level CDA10.7MG16-Z : Input Level CDA10.7MG48-Z : Input Level CDA10.7MC1-Z : Input Level ¡Center frequency rank A (Red) : 10.70MHzT30kHz B (Blue) : 10.67MHzT30kHz C (Orange) : 10.73MHzT30kHz D (Black) : 10.64MHzT30kHz E (White) : 10.76MHzT30kHz Z : A.B.C.D.E 5 ranks mixed. 100dBµ 180dBµ 112dBµ 100dBµ Mod.Freq.1400Hz Mod.Freq.1000Hz Mod.Freq.1000Hz Mod.Freq.1400Hz )Typ.value Freq.Dev. T22.5kHz Freq.Dev. T22.5kHz Freq.Dev. T.575kHz Freq.Dev. T22.5kHz 13 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC DISCRIMINATOR Ceramic Discriminator CDA10.7 Series For FM Detection !FREQUENCY CHARACTERISTICS TEST CIRCUIT OF CDA10.7MG1-Z 0.47µ CDA10.7MG1-Z CDA10.7MG1-A 500 V (ref.) 0.01µ FMIF Input 280 0.01µ CX20029 (SONY) 35343332313029 28 27 26 25 4.7µ 1µ 100K 300K 1µ 33µ S.S.G. Rg=50 13 14 15 16 17 18 19 20 21 22 23 24 10µ VCCW3V AF Output V(AFC) TEST CIRCUIT OF CDA10.7MG16-Z Distorsion Rate 0.1 1 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) 500 DC OUT AF OUT 22 21 20 19 18 0.1µ 17 16 15 14 13 9 11 12 TA8122AN 3 4 5 22µ 2 7 8 10 0.022µ 10 Distorsion Rate 1 CDA10.7MG16-Z 0.1 1 Input signal conditions Input Level 80dBµ Mod.Freq. 1000Hz Freq.Dev. T22.5kHz 270 IF IN 6 0.022µ 1 Demodulation Output Distorsion Rate (%) 23 Demodulation Output (mV) 24 10 100 24K 0.033µ 2.5µ 330p 1K VCC=3V CDA10.7MG16-A 1 10 Input signal conditions Input Level 100dBµ Mod.Freq. 400Hz Freq.Dev. T22.5kHz 100µ 3.3K 3.3K 3.3K 2.2K 1 2 3 4 5 6 7 8 9 10 11 12 Demodulation Output Distorsion Rate (%) 47µ 48 47 46 45 44 43 42 41 40 39 38 36 10 100 Demodulation Output (mV) 1000p SFE10.7MA19-Z TEST CIRCUIT OF CDA10.7MG48-Z 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) CDA10.7MG48-A 500 Vt 33n L. P. F. 100 3.3µ CSB456F W 15k Rch 10µ 10µ 5k Lch 1µ 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 LA1835 (SANYO) 2 3 4 W 0.047µ 5 6 7 8 9 10µ 0.047µ 75 10 11 12 13 1k IF-IN 3k 10µ CDA10.7MG48-Z 10µ REG. 15 1µ 1k 20k 47n 14 150 1 300 VCC = (7V) 0.47µ VCC=5V AF Output 0.1 500 10 0.01µ 4.7µ 10µ 10µ 0.1µ 100µ 28 27 26 25 24 23 22 21 20 19 18 17 16 15 CXA 1019M(SONY) 5 6 7 8 9 1K 4 10µ CDA10.7MC1-Z 100 14 3 Ref. 10 11 12 13 14 Demodulation Output (mV) 100 2 1 0.01µ FM S.S.G Rg=50 1 10 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) CDA10.7MC1-A AFC Distorsion Rate 1 Input signal conditions Input Level 112dBµ Mod.Freq. 1000Hz Freq.Dev. T75kHz TEST CIRCUIT OF CDA10.7MC1-Z 10 Demodulation Output Demodulation Output 10 Distorsion Rate 0.1 1 Input signal conditions Input Level 100dBµ Mod.Freq. 400Hz Freq.Dev. T22.5kHz 1 Distorsion Rate (%) AFC 47n Demodulation Output (mV) L. P. F. Distorsion Rate (%) 33n 1500p 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC DISCRIMINATOR Ceramic Discriminator CDA10.7 Series For FM Detection !CERAMIC DISCRIMINATOR LIST FOR FM RECEIVER CDA10.7MG Type Part Number CDA10.7MG1-Z CDA10.7MG2-Z CDA10.7MG4-Z CDA10.7MG6-Z CDA10.7MG7-Z CDA10.7MG8-Z CDA10.7MG9-Z CDA10.7MG12-Z CDA10.7MG13-Z CDA10.7MG14A-Z CDA10.7MG15-Z CDA10.7MG16-Z CDA10.7MG17-Z CDA10.7MG18-Z CDA10.7MG19-Z CDA10.7MG20-Z CDA10.7MG21 CDA10.7MG22-Z CDA10.7MG23-Z CDA10.7MG24 CDA10.7MG25V CDA10.7MG26-Z CDA10.7MG27-Z CDA10.7MG28-Z CDA10.7MG29 CDA10.7MG30-Z CDA10.7MG31-Z CDA10.7MG32-Z CDA10.7MG33-Z CDA10.7MG34V CDA10.7MG35-Z CDA10.7MG36-Z CDA10.7MG37-Z CDA10.7MG39-Z CDA10.7MG40-Z CDA10.7MG41-Z CDA10.7MG42-Z CDA10.7MG43-Z CDA10.7MG45-Z CDA10.7MG46-Z CDA10.7MG47A CDA10.7MG48-Z CDA10.7MG49-Z CDA10.7MG50-Z Corresponding IC CX-20029/CX-20111 CX-831 BA4234L TA7640AP LA1260 TA7303P TA7130P CXA1030P AN7007SU AN7006S LA1816 TA8122AN TEA5591 TA8132N BA1440 NE604 TBA229-2 LA1810 LA7770 TDA2557 U829B LA1805 CXA1238 U2501B TBA120U TE5592 TA2003 CXA1343M TA2007 U4490B TEA5594 TA2029 LA1830 TA8186 TEA5710 BA4220 SA605 LA1831 TA2008 LA1832 SA626 LA1835 MC13156 TA2022 Part Number CDA10.7MG51-Z CDA10.7MG52-Z CDA10.7MG53-Z CDA10.7MG54-Z CDA10.7MG55-Z CDA10.7MG56-Z CDA10.7MG57-Z CDA10.7MG58-Z CDA10.7MG59V CDA10.7MG60-Z CDA10.7MG61-Z CDA10.7MG62-Z CDA10.7MG63-Z CDA10.7MG64-Z CDA10.7MG65-Z CDA10.7MG66-Z CDA10.7MG67-Z CDA10.7MG68-Z CDA10.7MG69-Z CDA10.7MG70-Z CDA10.7MG71-Z CDA10.7MG72 CDA10.7MG74-Z CDA10.7MG75-Z CDA10.7MG76-Z CDA10.7MG77-Z CDA10.7MG82-Z Corresponding IC TDA1576T MC13173 AN7232 CXA1376 TEA5712T uPC1391H TA2057 TA2046 KA2244 BA1448/1449 TEA5762 TK14581 KA2292 KA2295 KA2298 BA4110 BA4240L CXA1991N CXA1538 LA1150 TA7765AF TA31161 LA1838 CXA1611 CXA3067M TA2111 TA2099 CDA10.7MC Type Part Number CDA10.7MC1-Z CDA10.7MC2-Z CDA10.7MC3 CDA10.7MC4A-Z CDA10.7MC5A-Z CDA10.7MC6-Z CDA10.7MC10-Z CDA10.7MC19-Z CDA10.7MC30-Z CDA10.7MC40-Z CDA10.7MC43A-Z CDA10.7MC55-Z Corresponding IC CXA1019M/CX-20091 A7687P/F AN7220A MC3356P LA7770 TEA5591 TEA5594 BA1440 TEA5592 TEA5710 LA1831 TEA5712T/N2 15 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CHIP CERAMIC DISCRIMINATOR Chip Ceramic Discriminator CDACV10.7 Series Chip Ceramic Discriminator For Thinner FM Radios. !DIMENSIONS 3.4T0.5 !FEATURES ** * 0.9T0.3 0.9T0.3 * : EIAJ Monthly Code * * : Rank (in mm) 2.0T0.05 4.0T0.1 5.5T0.05 W0.1 Y0.0 12.0T0.2 φ1.5 1.75T0.1 !DIMENSIONS OF PLASTIC TAPE 0.3T0.01 1. The discriminator is only 1.5mm thick so it is well suited for thin circuit boards. 2. This discriminator can be used with a variety of ICs including the following examples : CX-20029 (Sony) TA8122AF (Toshiba) TA2022 (Toshiba) CXA1538N (Sony) 3. It exhibits demodulation characteristics over a wide frequency range without the need for adjustment. 4. The series has excellent temperature characteristics and good aging stability. 5. The series has the same structure as the chip Cerafil® SFECV10.7 series. It is suitable for automatic mounting and its excellent heat resistance allows reflow soldering. 6. This series(CDACV10.7)and the chip Cerafil® SFECV10.7 series can be supplied with the equivalent center frequency as kits. 1.5T0.3 2.6T0.3 When using chip components in the design of FM radios, their arrangement and space allocation can create design difficulties. To help reduce these problems, Murata has developed this series of chip ceramic discriminators. The CDACV series has the same structure as the chip CERAFIL® SFECV series, and allow the design of FM detecting circuits requiring no adjustment. Also, these discriminators have good stable demodulation characteristics. The mounting area of the discriminators have been decreased to approximately 80% of conventional models (CDAC). The series will especially contribute to downsizing, height reduction. The CDACV10.7 series can be used as kits with the CERAFIL® SFECV10.7 series to facilitate design. Cavity Tape •Part Number marked side is always tacing upside. 3° Ma x. Direction of Feed Packaging Quantity : 2000 pcs / reel (φ180mm) 16 1.9T0.1 10° W0.1 Cover Tape 0.3T0.05 4.0T0.1 1.7 Y0.05 3.0T0.1 Peeling off strengh 0.1Y0.7N (in mm) This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CHIP CERAMIC DISCRIMINATOR Chip Ceramic Discriminator CDACV10.7 Series !SPECIFICATIONS Demodulation Output (mV) at f0 Distortion Factor (%) max. at f0 Demodulation 3dB Band width (kHz) min. Detection System CDACV10.7MG1-Z 55 min. 1.0 (0.3) f0T150 Quadrature Part Number IC CXA20029 CXA20111 CDACV10.7MG16-Z Within 60 to 90 0.9 (0.3) 300 Quadrature TA8122F CDACV10.7MG50-Z 35 min. 0.8 (0.2) 200 Quadrature TA2022 CDACV10.7MG69-Z 80 min. 1.0 (0.3) 330 Quadrature CXA1538N ( *Input signal conditions CDACV10.7MG1-Z : Input Level CDACV10.7MG16-Z : Input Level CDACV10.7MG50-Z : Input Level CDACV10.7MG69-Z : Input Level 100dBµ 180dBµ 100dBµ 100dBµ Mod.Freq.1000Hz Mod.Freq.1000Hz Mod.Freq.1000Hz Mod.Freq.1000Hz )Typ.value Freq.Dev. T22.5kHz Freq.Dev. T22.5kHz Freq.Dev. T22.5kHz Freq.Dev. T.075kHz !APPLICATIONS (3) Cleaning conditions (1) Standard Land Dimensions Please avoid cleaning this chip ceramic discriminator using the vapor or immersion methods because it is not perfectly shielded. CDAC10.7 1.5 1.5 2.6 !NOTICE 1.4 1.5 1.4 (in mm) (2) Soldering Conditions ¡Standard soldering conditions 1. Please avoid applying an excessive stress to the ceramic filter because it might be damaged. 2. Ceramic discriminators are designed to perform as intended in conjunction with specific ICs. Please contact us for the appropriate part number of the ceramic discriminator to be matched with the IC. It is also strongly recommended to evaluate the ceramic discriminator after mounting it on your products prior to series production. 3. These ceramic discriminator are designed to be used in the portable FM radio application. Please avoid using it for Car radio and other application which require high stability over a wide temperature range. Reflow Solder 5sec. Temperature (D) 240 230 Gradual Cooling 150 60 30 Time (sec.) ¡Soldering with iron Soldering conditions : Soldering iron temperature 280D ; Soldering time less than 3 seconds. Note: Do not allow the tip of the soldering iron to directly contact the chip ceramic discriminator. 17 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CHIP CERAMIC DISCRIMINATOR Chip Ceramic Discriminator CDAC10.7 Series 0.47µ CDACV10.7MG1-Z !FREQUENCY CHARACTERISTICS TEST CIRCUIT OF CDACV10.7MG1-Z CDACV10.7MG1-A 1000 100 47µ 2.2K 0.01µ FMIF Input 280 0.01µ 1 2 3 4 5 6 7 8 9 10 11 12 CX20029 (SONY) 35343332313029 28 27 26 25 4.7µ 1µ 100K 1µ300K 33µ S.S.G. Rg=50 13 14 15 16 17 18 19 20 21 22 23 24 10µ VCCW3V AF Output V(AFC) AF Output 10 TEST CIRCUIT OF CDACV10.7MG16-Z 1 Distorsion 0.1 1 Input signal conditions Input Level 100dBµ Mod.Freq. 1000Hz Freq.Dev. T22.5kHz 100µ 3.3K 3.3K 3.3K 48 47 46 45 44 43 42 41 40 39 38 36 10 100 Distortion (%) 1000p Recovered AF Output Voltage (mV) V(ref.) 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) CDACV10.7MG16-A 100 1000 AF Out 24 23 22 21 20 19 18 17 16 15 14 13 8 9 10 11 12 TA8122F 3 5 4 6 7 0.022µ 2 22µ 1 Input signal conditions Input Level 80dBµ Mod.Freq. 1000Hz Freq.Dev. T22.5kHz CDACV10.7MG16-Z SFE10.7MA19 270 0.022µ IF IN TEST CIRCUIT OF CDACV10.7MG50-Z 21 3 10.9 100 4.3K 20 19 18 TA 20 22 2 10.6 10.7 10.8 Frequency (MHz) AF Output 6800p 0.01µ 1 0.1 1 4 17 16 15 14 13 ( T OS H IB A ) 5 6 7 8 9 10 11 12 W 3.3µ 0.01µ W SFE10.7MA5 10µ 270 CDACV10.7MG50-Z Vcc (1.2V) IF Input TEST CIRCUIT OF CDACV10.7MG69-Z Input signal conditions Input Level 100dBµ Mod.Freq. 1000Hz Freq.Dev. T22.5kHz Recovered AF Output Voltage (mV) 4.7µ 22 1 Distortion 1000 3300p W 23 10 CDACV10.7MG50-A 20K 24 AF Output 10.5 DC Output 330p 10 100 100 10 AF Output 10 1 Distortion 0.1 1 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 CDACV10.7MG69-A 100 1000 Reg VCC (3V) CDACV10.7MG69-Z Distortion (%) 0.1µ 330p Distortion (%) 2.2µ W Y 0.033µ 1K DC Out Recovered AF Output Voltage (mV) 24K Vcc=3v 2.2k 0.01µ 10µ + 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 10 11 12 13 14 15 3 4 5 6 7 8 100 µ 0.01 µ + + 9 + 1µ 2 33 µ 1 + 4.7 µ CXA1538N + 0.01µ 0.01µ 1µ AF OUT 0.022µ VCC (3V) 3.3k 0.022µ 18 3.3k AFC IF IN Input signal conditions Input Level 100dBµ Mod.Freq. 1000Hz Freq.Dev. T75kHz AF Output 10 100 10 1 Distortion Distortion (%) + + Recovered AF Output Voltage (mV) 3.3µ 100 10µ 0.1 1 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC FILTER *CERAFIL® is the Registered Trademark of Murata's Ceramic Filters. EXAMPLE OF APPLIED CIRCUIT Application for LA1140 (Car Radio) L1 2.2µH AGC R7 200 C3 0.047 C7 0.047 VR1 150k C8 0.047 L2 SFE10.7MS3A10-A R4 10k R6 330 SFE10.7MS3A10-A C.F. 16 12 9 11 R13 12k 13 1 C1 0.022 0.047 C6 R8 330 FRONT END R3 R2 C.F. 1.8k C2 0.022 C4 1.8k R2 1k C5 7 AFC W C9 0.047 C10 4.7µ LA1135 (SANYO) 2 W 8 3 4 5 6 14 22k 0.047Z2 R9 220k C14 0.047 15 R10 2.2µ C11 33p 10 R12 R1 100 Vref. R14 C13 33p R2 47k C15 Application for CXA1019M (Radio) FM PF FM OSC FM Cerafil® (SFE10.7MA5-A) CERAMIC DISCRIMINATOR (CDA10.7MC1-A) W R 8 FM BPF 12 AM ANT 13 IF FM IF OUT IN 6 14 17 7 FM FRONT END FM/AM BAND SELECT W 2 FM DISCRI FM IF AMP DETECTOR 19 METER 25 26 Vcc RIPPLE FILTER TUNING METER 13 REGULATOR 8 REG OUT W 28 1 CXA1019M(SONY) 10 11 AM FRONT END 18 AM OSC AM IF AMP DETECTOR AM IF IN 20 16 22 W AF PRE/POWER AMP VOL 23 DEP OUT 21 W 4 24 AF IN 27 W SP 3 W W AM Cerafil® (SFU455B) VOL No adjustment is needed the FM detection stage due to use the ceramic discriminator. 19 This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 CERAMIC FILTER *CERAFIL® is the Registered Trademark of Murata's Ceramic Filters. EXAMPLE OF APPLIED CIRCUIT Application for TA8122AN/AF (Radio) 23 FM OSC 22 21 20 19 FM OSC AM OSC AF 2 3 AM AGC AM MIX 4 BPF Y 6 Vcc2 18 LPF2 VCO 16 15 Phase COM Phase COM VCO L DET 7 FM IF IN FM IF 8 FM DET 0.022µ TUN LED 9 GND2 10 TUN LED 0.015µ 14 OUT R L Y Y R 4.7µ 13 HYX TA8122AN(TOSHIBA) SW ST LED 11 12 ST LED QUAD 0.033µ 560 SFU455B SFE10.7MA5-AZ2 CDA 10.7MG16-A Detection and MPX stage adjustment ceramic discriminator and ceramic resonator (CERALOCK®) 20 4.7µ W W ST DECODER Freq Divider T2 10µH OUT L 17 AM/FM MONO SW AM IF IN 0.015µ 0.1µ Y LPF1 AM IF 5 AM AGC W 33µ FM MIX MPX IN PRE FM DET AM MIX FM RF GND1 DEF OUT AM MIX AM RF 1 AM OSC Y Y AM W Y 22µ OUT Vcc1 24 FM RF IN W W FM W 560 AM PF IN FM PF MO 0.068µ 10µF 15p ST 22k T1 CSB 456F16 0.1µ L2 100k 8p 0.022µF 33k 5p 22p L1 20p L3 100k 330p IS2236 Vcc (3V) This is the PDF file of catalog No.P61E-5. No.P61E5.pdf 98.6.22 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to “the Foreign Exchange and Foreign Trade Control Law” of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or engineers before using our products listed in this catalog for the applications requiring especially high reliability what defects might directly cause damage to other party's life, body or property (listed below) or for other applications not specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Medical equipment t Transportation equipment (automobiles, trains, ships,etc.) y Traffic signal equipment u Disaster prevention / crime prevention equipment i Data-processing equipment o Applications of similar complexity or with reliability requirements comparable to the applications listed in the above 3. Product specifications in this catalog are as of May 1998, and are subject to change or stop the supply without notice. Please confirm the specifications before ordering any product. If there are any questions, please contact our sales representatives or engineers. 4. The categories and specifications listed in this catalog are for information only. Please confirm detailed specifications by checking the product specification document or requesting for the approval sheet for product specification, before ordering. 5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 6. None of ozone depleting substances (ODS) under the Montreal Protocol is used in manufacturing process of us. http://www.murata.co.jp/products/ Head office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-951-9111 Cat. No. R00E-0 Marketing Group 1874 Sumiyoshi-cho Kizuki, Nakahara-ku Kawasaki, 211-0021, Japan Phone:81-44-422-5153 Fax:81-44-433-0798