Thermoelectric Cooler HOT2.0-65-F2A Performance Specifications Hot Side Temperature (ºC) 25ºC 50ºC Qmax (Watts) 8.76 9.75 Delta Tmax (ºC) 64 74 Imax (Amps) 2.0 2.0 Vmax (Volts) 7.8 8.4 3.39 3.83 Performance Curves – Th = 25ºC Performance Curves – Th = 50ºC 70 60 50 40 30 20 10 8.0 6.0 4.0 2.0 0.0 0 90 80 70 60 50 40 30 20 10 0 Delta T (C) Delta T (C) 10.0 10.0 2.0 2.0 9.0 1.6 9.0 1.6 1.2 8.0 8.0 1.2 0.8 0.8 7.0 6.0 5.0 7.0 0.4 6.0 Qc (W) 0.4 5.0 4.0 4.0 3.0 3.0 2.0 2.0 1.0 1.0 0.0 0.0 80 70 60 50 40 30 20 10 Qc (W) 80 10.0 Voltage (V) 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Voltage (V) Module Resistance (Ohms) 80 0 70 60 50 40 30 20 10 0 Delta T (C) Delta T (C) Copyright Melcor Corporation. Melcor reserves the right to change these specifications without notice. 1 Rev 1.01 HOT2.0-65-F2A Mechanical Drawing Ceramic Material: Alumina (Al2O3) Solder Construction: 271ºC, Patented Thickness and Surface Finish Specifications Suffix Thickness Flatness & Parallelism Hot Face Cold Face Lead Length NONE 0.086” ± 0.002” 0.002” / 0.002” Lapped Lapped 2.0” -T1 0.086” ± 0.001” 0.001” / 0.001” Lapped Lapped 2.0” -T2 0.086” ± 0.0005” 0.0005” / 0.0005” Lapped Lapped 2.0” Notes: - Lead wires are 30 AWG, solid, and uninsulated, insulated wire available upon request. - Metallization options: Pre-Tinning Hot and/or Cold Face with -HG-CG Gold Metallization Hot and/or Cold Face -H3-C3 138ºC BiSn Solder Pre-Tinning Hot and/or Cold Face with -H1-C1 Non-Metallized Hot and/or Cold Face -H4-C4 183ºC PbSn Solder Pre-Tinning Hot and/or Cold Face with Pre-Tinning Hot and/or Cold Face with -H2-C2 -H5-C5 118ºC InSn Solder 93ºC InSnCd Solder Operation Tips • • • Max. Operating Temperature: 200ºC Do not exceed Imax or Vmax when operating module. Please consult Melcor for moisture and corrosion protection options, and process temperature specifications. Copyright Melcor Corporation. Melcor reserves the right to change these specifications without notice. 2 Rev 1.01 HOT2.0-65-F2A Page Intentionally Left Blank For additional information please contact Melcor: INTERNET: www.melcor.com ONLINE STORE: www.store.melcor.com E-MAIL: [email protected] N. AMERICA: Melcor Corp., 1040 Spruce Street, Trenton, NJ 08648 Phone: (609) 393-4178, Fax: (609) 393-9461 For a worldwide distributor listing please visit our Global Sales Office web page at http://www.melcor.com/global.html Melcor and the Melcor logo are trademarks of Melcor Corporation. Copyright Melcor Corporation. Melcor reserves the right to change these specifications without notice. 3 Rev 1.01