Thermoelectric Cooler CP1.0-63-05 Performance Specifications Hot Side Temperature (ºC) 25ºC 50ºC Qmax (Watts) 16.6 18.7 Delta Tmax (ºC) 67 77 Imax (Amps) 3.9 3.9 Vmax (Volts) 7.62 8.12 1.7 1.9 Performance Curves – Th = 25ºC Performance Curves – Th = 50ºC 70 60 50 40 30 20 10 8.0 6.0 4.0 2.0 0.0 0 90 80 70 Delta T (C) 60 50 40 30 20 10 0 Delta T (C) 20.0 20.0 4.0 4.0 3.2 3.2 2.4 16.0 2.4 1.6 1.6 0.8 0.8 12.0 Qc (W) 12.0 16.0 8.0 8.0 4.0 4.0 0.0 80 70 60 50 40 30 20 10 0.0 0 80 Delta T (C) 70 60 50 40 30 20 10 0 Delta T (C) Copyright Melcor Corporation. Melcor reserves the right to change these specifications without notice. 1 Rev 1.01 Qc (W) 80 10.0 Voltage (V) 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Voltage (V) Module Resistance (Ohms) CP1.0-63-05 Mechanical Drawing NO DRAWING AVAILABLE Ceramic Material: Alumina (Al2O3) Solder Construction: 138ºC, Bismuth Tin (BiSn) Thickness and Surface Finish Specifications Suffix Thickness (Prior to Tinning) Flatness & Parallelism Hot Face Cold Face Lead Length L 0.126” ± 0.010” 0.0015” / 0.0015” Lapped Lapped 4.5” L-1 0.126” ± 0.001” 0.001” / 0.001” Lapped Lapped 4.5” L-2 0.126” ± 0.0005” 0.0005” / 0.0005” Lapped Lapped 4.5” ML 0.130 ± 0.010” 0.002” / 0.002” Metallized Lapped 4.5” LM 0.130 ± 0.010” 0.002” / 0.002” Lapped Metallized 4.5” MM 0.134 ± 0.010” 0.002” / 0.002” Metallized Metallized 4.5” Operating Tips • • • Max Operating Temperature: 80ºC Do not exceed Imax or Vmax when operating module. • Please consult Melcor for moisture and corrosion protection options. Solder tinning also available on metallized ceramics. Copyright Melcor Corporation. Melcor reserves the right to change these specifications without notice. 2 Rev 1.01 CP1.0-63-05 Page Intentionally Left Blank For additional information please contact Melcor: INTERNET: www.melcor.com ONLINE STORE: www.store.melcor.com E-MAIL: [email protected] N. AMERICA: Melcor Corp., 1040 Spruce Street, Trenton, NJ 08648 Phone: (609) 393-4178, Fax: (609) 393-9461 For a worldwide distributor listing please visit our Global Sales Office web page at http://www.melcor.com/global.html Melcor and the Melcor logo are trademarks of Melcor Corporation. Copyright Melcor Corporation. Melcor reserves the right to change these specifications without notice. 3 Rev 1.01