FILTERS TRAPS FOR TV/VCR APPLICATIONS HIGH ATTENUATION TPS첸MJ/MB, TPWA, TPT SERIES ■ High performance, high durability TPS첸MB ■ Good performance of attenuation ■ Shape factor can be changed by the value of inductance “L” ■ 3-terminal type TPWA ■ Recommended for Multi standard set TPT ■ Good performance of attenuation ■ Space saving ■ 3-terminal type The TPS M J/MB lines of ceramic traps are band reject filters used for video and sound IF attenuation. The 2 terminal TPS MJ Series can be used to attenuate either the sound signal in B/W receivers or the chroma signal in video. The 3 terminal TPS MB Series contains 2 trap elements on one substrate for additional attenuation. This line of traps can be used in the sound IF of CATV/VCR receivers. FEATURES TPS첸MJ ■ Small size, lightweight DIMENSIONS: mm TPS첸MB SERIES TPS첸MJ SERIES TPS3.58MJ 10.0 7.0 T4.5B T4.5J 7.0 5.0 5.0 2.5 8.0 ± 2.0 TW01B M 10.0 max. ** 1.38 ± 0.2 0.5 ± 0.1 5.0 ± 1.0 5.0 ± 0.2 0.3 ± 0.1 5.0 3.0 ± 0.2 TPT SERIES 7.0 ± 2.0 T3.58J 10.0 M 2.5 TPWA SERIES 10.0 max. 1.38 ± 0.2 1.7 ± 0.1 0.5 ± 0.1 5.0 ± 1.0 0.3 2.5 ± 0.1 ±0.2 2.5 ±0.2 5.0 max. 5.0 max. TT01B 7.0 ± 2.0 ** M 7.0 ± 2.0 ** 1.38 ± 0.2 1.7 ± 0.1 0.5 ± 0.1 5.0 ± 1.0 0.3 2.5 ± 0.1 ±0.2 2.5 ±0.2 3.5 ± 1.0 5.0 max. SPECIFICATIONS Part Number Nominal Center Frequency (fn) Attenuation at fn (dB) min. 20dB Attenuation Bandwidth (kHz) min. Spurious Response (0 ~ fn) (dB) max. 4.5MHz 5.5MHz 6.0MHz 6.5MHz 3.58MHz 4.43MHz 20 (30) 20 (30) 20 (30) 20 (30) 20 (27) 20 (30) 30 (50) 30 (60) 40 (70) 40 (90) 20 (30) 40 (50) 0.5 (0) 0.5 (0) 0.5 (0) 0.5 (0) 0.5 (0) 0.5 (0) Attenuation at fn (dB) min. 30dB Attenuation Bandwidth (kHz) min. Spurious Response (0 ~ fn) (dB) max. 쏒TPS4.5MJ 쏒TPS5.5MJ 쏒TPS6.0MJ TPS6.5MJ 쏒TPS3.58MJ TPS4.43MJ The level at 1 MHz shall be made for a reference (0dB). ( Nominal Center Frequency (fn) Part Number 쏒TPS4.5MB2 쏒TPS5.74MB2왔 쏒TPS첸MB 4.5MHz 5.742MHz 5.5 ~ 6.5MHz 5.5MHz 5.742MHz 쏒TPS5.5MWA왔 The level at 1 MHz shall be made for a reference (0dB). Part Number 50 (80) 70 (120) 70 (120) 70 (130) — Other frequencies (3.58, 4.43 MHz) are also available. Nominal Center Frequency fn1 fn2 6.0MHz 5.5MHz 5.5MHz 5.5MHz TPWA01B TPWA02B TPWA03B TPWA04B 35 (45) 35 (45) 35 (45) 32 (45) 25 (33) 6.5MHz 6.5MHz 6.0MHz 5.742MHz Attenuation at fn (dB) min. 0.5 (0) 0.5 (0) 0.5 (0) 0.5 (0) 6.0mm height type (TPSL첸MB) is also available. 30dB Attenuation Bandwidth (kHz) min. fn1 fn2 30 (45) 30 (45) 30 (45) 30 (45) 70 (100) 50 (80) 50 (80) 50 (80) Part Number 5.5MHz TPT01B 6.0MHz 6.5MHz ( 70 (120) 50 (120) 50 (100) 50 (100) 0.5 (0) 0.5 (0) 0.5 (0) 0.5 (0) ( Attenuation at fn (dB) min. 30dB Attenuation Bandwidth (kHz) min. fn1 fn2 fn3 30 (45) 50 (80) 50 (90) 50 (100) 0.5 (0) ( PART NUMBERING SYSTEM SERIES 쏒Available as standard through authorized Murata Electronics Distributors. 4.5M CENTER FREQUENCY in MHz B2 INDIVIDUAL SPECIFICATION 왖 Applicable in North American market only. 왔Applicable in European market only. For more detailed information regarding this product line in North America, see Catalog No. P-05-D. To receive additional information on Murata Products call 1-800 -831-9172. For more detailed information regarding this product line in Europe, see Catalog No. P25E-2. 128 ) Typical value Spurious Response (0 ~ 5MHz) (dB) max. The hole diameter of printed circuit board should be 1.0mm. TPS ) Typical value Spurious Response (0 ~ 5MHz) (dB) max. The hole diameter of printed circuit board should be 1.0mm. Nominal Center Frequency fn1 fn2 fn3 ) Typical value ) Typical value