SHEET 1 OF 1 WINDOW TO VIEW LED _ 12.90 [.508 in] C 1 n13.60 [.535 in] 2 + n17.5 [.69 in] CIRCUIT: SPST OFF-(ON) E MOMENTARY PANEL MOUNTING C LED SPECIFICATION LED PARAMETER UNITS n12.00 GREEN LED FORWARD CURRENT mA 20 FORWARD VOLTAGE @ 20mA V 2.0-2.6 LUMINOUS INTENSITY mcd 42-80 NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CIRCUIT: SPST OFF-MOMENTARY ON 5. CONTACT MATERIAL: Gold over SILVER 6. RATING: 125mA @ 125 VAC 100mA @ 50 VDC 7. ELECTRIC LIFE: 500,000 CYCLES AT FULL LOAD 8. CONTACT RESISTANCE: 50 milli-OHM max. (INITIAL) 9. INSULATION RESISTANCE: 1,000 MEGA-OHM min. @ 500VDC. 10. DIELECTRIC STRENGTH: 1,000 VAC rms. F 11. OPERATING FORCE: 350 gf +/- 150 gf 12. OPERATING TEMPERATURE: -30°C TO +85°C. 13. CONTACT BOUNCE: 10ms MAX. 14. TRAVEL: 1.5mm 15. PANEL THICKNESS RANGE: 0.8 - 1.8 mm 16. DENOTES CRITICAL PARAMETER. 17. 2002/95/EC (ROHS) COMPLIANT 18. HARDWARE INCLUDED: 1. T081100 RUBBER SEAL (1) E 19. SEAL RATING: IP67 AT FRONT PANEL G [.472 in] LAMP: GREEN LED F 1.20 [.047 in] 1 2 B SHORT LED LEAD CATHODE (-) EBP F 19467 CORRECT DIM / DRAWING CLEAN-UP 11/23/10 BMA E 19358 MISC. DRAWING UPDATES 10/25/10 BMA BLR D 18410 ORIENT ANODE TO FLAT 2/20/09 C 18363 CHANGE 2 DIMS 12/22/08 BLR B 18349 CHANGE 4 DIMS 12/12/08 BLR RELEASE FOR PRODUCTION 2/19/08 BLR DATE BY DESCRIPTION 2.00 [.079 in] EPOXY SEAL 9/24/14 PCR NO D 15.10 [.594 in] SEAL RATING CHANGE FROM IP65 TO IP67 REV 5.00 [.197 in] B 21594 17973 2.00 [.079 in] 1.0 [.04 in] THICK RUBBER WASHER G A HOUSING: BLACK ACTUATOR: COLOR BLACK THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED LONG LED LEAD ANODE (+) 1.20 [.047 in] TITLE SCALE 3.40 [.134 in] .40 [.016 in] 5.08 [.200 in] 2.80 [.110 in] RP8100B1M1CEBLKBLKGRN DATE 2:1 DR 2/20/2009 BLR REV DWG ST081026 G