SHEET 1 OF 1 WINDOW TO VIEW LED _ 12.90 [.508 in] 2 1 n13.60 [.535 in] n17.50 [.689 in] + CIRCUIT: SPST OFF-(ON) C MOMENTARY PANEL MOUNTING LED PARAMETER UNITS BLUE FORWARD CURRENT mA 20 FORWARD VOLTAGE @ 20mA V 2.8-3.2 LUMINOUS INTENSITY mcd 28-70 n12.00 [.472 in] 2.00 [.079 in] ACTUATOR: COLOR BLACK NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY THREAD: 4. CIRCUIT: SPST OFF-MOMENTARY ON M12X0.75 5. CONTACT MATERIAL: Gold over SILVER 6. RATING: 125mA @ 125 VAC 100mA @ 50 VDC 7. ELECTRIC LIFE: 500,000 CYCLES AT FULL LOAD 8. CONTACT RESISTANCE: 50 milli-OHM max. (INITIAL) 15.10 D [.594 in] 9. INSULATION RESISTANCE: 1,000 MEGA-OHM min. @ 500VDC. 10. DIELECTRIC STRENGTH: 1,000 VAC rms. D 11. OPERATING FORCE: 350 gf +/- 150 gf 12. OPERATING TEMPERATURE: -30°C TO +85°C. 13. CONTACT BOUNCE: 10ms MAX. 14. TRAVEL: 1.5mm 15. PANEL THICKNESS RANGE: 1.5 - 4.0 mm. SHORT LED LEAD 16. DENOTES CRITICAL PARAMETER. CATHODE (-) 17. 2002/95/EC (ROHS) COMPLIANT 18. MAX MOUNTING TORQUE: 1.5 Nm APPLIED TO THE NUT 19. HARDWARE INCLUDED: 1. T081101 LOCK WASHER (1) 5.00 [.197 in] 2. T081102 HEX NUT (1) 3. T081100 RUBBER WASHER (1) 1.20 C 20. SEAL RATING: IP67 AT THE FRONT PANEL E [.047 in] 21593 CHANGE NOTE 20: IP67 WAS IP65 9/24/14 D 19457 CORRECT DIM / DRAWING CLEAN UP 11/18/10 BMA C 19358 MISC. DRAWING UPDATES 10/25/10 BMA B 17943 Dim was 1.0[0.025] 1/24/08 rc New-Release 12/20/07 rc DATE BY E A 17904 REV PCR NO DESCRIPTION THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED HOUSING: BLACK 5.00 [.197 in] B 2.00 [.079 in] 1.0 [.04] THICK RUBBER WASHER 1.20 [.047 in] 1 3.40 [.134 in] .20 [.008 in] .40 [.016 in] 2.80 [.110 in] 2 EPOXY SEAL 5.08 [.200 in] 10.80 [.425 in] EBP TITLE SCALE RP8100B2M1CEBLKBLKBLU DATE 2:1 DR 12/13/2007 rc REV DWG ST081021 E