SHEET 1 OF 1 19.40 [.764 in] SWITCH FUNCTION POS. 1 POS. 2 3 1 ON (ON) 1-3 1-2 1 2 SPDT CONTACT CONFIGURATION 15.70 [.618 in] FRAME COLOR: BLACK (ON)=MOMENTARY (X) R.13 [.005 in]MAX 12.70 [.500 in] 1.52 [.060 in] CAP COLOR: BLACK ISOMETRIC 11.70 o[.461 in] 6.80 [.268 in] PANEL MOUNTING 1.19 TP 3.18 PANEL THICKNESS (X) DIM. PANEL THICKNESS 1.19 - 2.30 2.31 - 3.18 15.70 15.75 - 15.88 E-SWITCH LOGO ON OPPOSITE SIDE NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. PLATING MATERIAL: GOLD 5. RATING: 0.4VA MAX. @ 20VDC OR AC 6. ELECTRIC LIFE: 50,000 MAKE-AND-BREAK CYCLES AT FULL LOAD 7. INSULATION RESISTANCE: 1,000 MEGA-OHM MIN. 8. ACUATION FORCE: 300 ± 100gf 9. TRAVEL: 1.0 ± 0.2mm 10. CONTACT RESISTANCE: 20 mOHM MAX. TYPICAL @ 2-4 VDC 11. DIELECTRIC STRENGTH: 1,000 V RMS @ SEA LEVEL. 12. OPERATING TEMP.: -30°C to 85°C 13. DENOTES CRITICAL PARAMETER. 14. 2002/95/EC (ROHS) COMPLIANT. F 20057 REV PCR NO DRAWING UPDATE / CLEAN-UP DESCRIPTION 10.32 [.406 in] 2.00 [.079 in] 10.43 [.411 in] 1.93 [.076 in] EPOXY SEAL 1 2 3 3 .76 [.030 in] 4.70 [.185 in] 12.70 [.500 in] 7/27/11 BGL DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE SCALE 5.00 [.197 in] .86 [.034 in] 2.03 [.080 in] 6.86 [.270 in] 700SP7M1REAP2BLKBLK 2:1 DATE 7/27/2011 DR BGL DWG T711002 REV F