SHEET 1 OF 1 12.70 [.500 in] 4.83 [.190 in] n1.85 [.073 in] 11.43 [.450 in] 4.70 [.185 in] KEYWAY P.C. MOUNTING POS. 1 SWITCH FUNCTION POS. 1 POS. 2 NONE ON 2-3, 5-6 N/A 2-1, 5-4 POS. 3 10.41 [.410 in] 1/4-40 UNS - 2A 8.89 [.350 in] (ON) = MOMENTARY 5 2 3 1 4 2.92 n[.115 in] 25~ POS. 3 ON POS. 2 E-SWITCH MARKING ON OPPOSITE SIDE 8.89 [.350 in] 6 CIRCUIT: DPDT EPOXY SEAL 1 NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: SILVER 5. RATING: 2 AMPS @250VAC 5 AMPS @120VAC OR 28VDC 6. ELECTRIC LIFE: 40,000 make-and-break cycles at full load. 7. INSULATION RESISTANCE: 1,000 Mega-ohm min. 8. DIELECTRIC STRENGTH: 1,000 V RMS @sea level. 9. OPERATING TEMP.: -30°C to 85°C 10. DENOTES CRITICAL PARAMETER. 11. 2002/95/EC (ROHS) COMPLIANT D 17491 REV PCR NO REVISED AND REDRAWN DESCRIPTION 2 3 1.52 [.060 in] 3 4.70 [.185 in] TYP. 7/20/07 BF DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED 1.27 [.050 in] TYP. 6.60 [.260 in] .76 [.030 in] TYP. TITLE SCALE 6 4.83 [.190 in] 100DP1T1B1M2QE 2:1 DATE DR 7/20/2007 BF REV DWG T121009 D