SHEET 1 OF 1 13.20 [.520 in] 4.70 [.185 in] 1 5.08 [.200 in] 5.08 [.200 in] 1.22 [.048 in] 6.86 [.270 in] n1.85 1.02 [.040 in] [.073 in] 2 3 KEYWAY P.C. MOUNTING .72 [.028 in] 12.70 [.500 in] SWITCH FUNCTION POS. 1 POS. 2 2 3 ON (ON) 1-3 1-2 1 7.57 [.298 in] CIRCUIT: SPDT (ON)=MOMENTARY E-SWITCH LOGO ON OPPOSITE SIDE NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: GOLD 5. RATING: 0.4VA MAX. @ 20 VAC OR VDC MAX. 6. ELECTRIC LIFE: 50,000 MAKE-AND-BREAK CYCLES AT FULL LOAD 7. INSULATION RESISTANCE: 1,000 MEGA-OHM MIN. 8. ACUATION FORCE: 300 ± 100gf 9. TRAVEL: 1.0 ± 0.2mm 10. CONTACT RESISTANCE: 20 mOHM MAX. TYPICAL @ 2-4 VDC 11. DIELECTRIC STRENGTH: 1,000 V RMS @ SEA LEVEL. 12. OPERATING TEMP.: -30°C to 85°C 13. DENOTES CRITICAL PARAMETER. 14. 2002/95/EC (ROHS) COMPLIANT. E 20004 REV PCR NO n3.10 [.122 in] 5.12 [.202 in] DRAWING UPDATE / CLEAN-UP DESCRIPTION 6.35 [.250 in] 1.02 [.040 in] 13.20 [.519 in] 3 1 2 BGL DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED EPOXY SEAL 3.18 [.125 in] 4.70 [.185 in] .76 [.030 in] 6/15/11 3 TITLE SCALE 1.27 [.050 in] 700SP7B20M6RE 2:1 DATE 6/15/2011 DR BGL DWG T711003 REV E