SHEET 1 OF 1 15.75 [.620 in] 4.70 [.185 in] P.C. MOUNTING 5.72 [.225 in]FLAT 3.18 [.125 in] n1.85 [.073 in] 8.13 [.320 in] 16.26 [.640 in] SWITCH FUNCTION POS. 1 POS. 2 2 3 5.12 [.202 in] ON 1-3 (ON) 1-2 n3.10 [.122 in] 1 CIRCUIT: SPDT 1.02 [.040 in] (ON)=MOMENTARY E-SWITCH LOGO ON THIS SIDE NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: GOLD 5. RATING: 0.4VA MAX. @ 20 VAC OR VDC MAX. 6. ELECTRIC LIFE: 50,000 MAKE-AND-BREAK CYCLES AT FULL LOAD 7. INSULATION RESISTANCE: 1,000 MEGA-OHM MIN. 8. ACUATION FORCE: 300 ± 100gf 9. TRAVEL: 1.0 ± 0.2mm 10. CONTACT RESISTANCE: 20 mOHM MAX. TYPICAL @ 2-4 VDC 11. DIELECTRIC STRENGTH: 1,000 V RMS @ SEA LEVEL. 12. OPERATING TEMP.: -30°C to 85°C 13. DENOTES CRITICAL PARAMETER. 14. 2002/95/EC (ROHS) COMPLIANT. B 19993 REV PCR NO DRAWING CLEAN-UP / UPDATE DESCRIPTION 6.35 [.250 in] 16.00 [.630 in] 4.70 [.185 in] EPOXY SEAL 1 3 2 .51 [.020 in] 3 .76 [.030 in] 1.22 [.048 in] 4.70 [.185 in] 15.75 [.620 in] 6/13/11 BGL DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE SCALE 1.27 [.050 in] 3.18 [.125 in] 700SP7B21VS3RE 2:1 DATE 6/13/2011 DR BGL DWG T711046 REV B