n22.00 `.10 [.866 `.004 in] SHEET 1 OF 1 n22.00 `.10 [.866 `.004 in] 10.50 `.10 [.413 `.004 in] 2.44 [.096 in] RING ILLUMINATION n25.00 [.984 in] .40 [.016 in] n18.00 [.709 in] RECOMMENDED PANEL CUTOUT OPTIONAL PANEL CUTOUT MAX. PANEL THICKNESS 12mm MAX. PANEL THICKNESS 12mm 1.64 [.064 in] n13.80 [.543 in] 2.44 [.096 in] A 2 3 4 (-) POS. 1 1-2 ON 3-4 OFF (+) DPST CONTACT CONFIGURATION 11.40 [.449 in] LASER ENGRAVED M10 MARKING SWITCH FUNCTION 1 POS. 2 DETAIL A SCALE 2 : 1 ACTUATOR COLOR: STAINLESS STEEL MACHINE FINISH 1-2 (OFF) 3-4 (ON) BODY COLOR: STAINLESS STEEL MACHINE FINISH 2.00 [.079 in] NOTE: 1. ALL DIMENSIONS IN MM [INCH] B 41.00 `.50 2. GENERAL TOLERANCE: X.X = ± 0.4 [1.614 `.020 in] X.XX = ± 0.25 3. TERMINAL NOS. FOR REF. ONLY 4. FUNCTION: DPST 5. RATING: 2A @ 48VDC 6. ILLUMINATION VOLTAGE: 12V 7. CONTACT RESISTANCE: 50mΩ MAX. @ 1A 12VDC 8. INSULATION RESISTANCE: 1,000MΩ @ 500VDC 9. DIELECTRIC STRENGTH: 2,000VAC MIN. FOR 1 MINUTE 10. ELECTRICAL LIFE: 50,000 CYCLES 11. OPERATING TEMPERATURE: -20°C TO 55°C 12. INGRESS PROTECTION: IP65 13. DENOTES CRITICAL PARAMETER 13. 2002/95/EC (ROHS) COMPLIANT 14. ILLUMINATION COLOR: BLUE (FORWARD), BLUE (REVERSE) 15. HARDWARE INCLUDED (NOT SHOWN) HEX NUT AND O-RING A 21357 REV PCR NO 3 7.00 [.276 in] 4/4/14 EBP RELEASE FOR PRODUCTION 1/17/14 EBP DATE BY DESCRIPTION 1 (+) 2 4 (+) 4 .50 [.020 in] 6 PLACES TITLE SCALE (-) 2 2.80 [.110 in] 6 PLACES 13.60 [.535 in] BODY WAS 5MM SHORTER THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED M22x1.0 B 22.20 [.874 in] 30.70 `.50 [1.209 `.020 in] 21426 10.30 `.10 [.405 `.004 in] ( ) = MOMENTARY B B ARIAL ROUNDED MT BOLD FONT 6.00 [.236 in] PV7F2Y0SS-344-M10 DATE DR 1/17/2014 EBP DWG 52-PV7F2Y0SS344M10 REV B