SHEET 1 OF 1 16.00 [.630 in] SWITCH FUNCTION PANEL CUTOUT MAX. PANEL THICKNESS 10.0mm [.315 in] POS. 1 POS. 2 OFF (ON) OPEN 1-2 (ON) = MOMENTARY 18.00 [.709 in] RING ILLUMINATION 11.90 [.469 in] 9.20 [.362 in] FLAT ACTUATOR MACHINE FINISH STAINLESS STEEL 1 2 - + BODY FINISH MACHINE FINISH STAINLESS STEEL 1.50 [.059 in] CIRCUIT: SPST NOTE: 15.50 16.50 .50 1. ALL DIMENSIONS IN MM [INCH] [.610 in] .020 in] [ .650 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: SILVER PLATED 5. RATING: 2A 48VDC 6. ELECTRIC LIFE: 50,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000MΩ MIN. 8. DIELECTRIC STRENGTH: 2,000VAC MIN. FOR 1 MINUTE 9. CONTACT RESISTANCE: 50mΩ MAX. @ 1A 12VDC 10. OPERATING TEMP.: -20°C to 55°C 9.80 11. TRAVEL: 1.8mm [.386 in] 12. DENOTES CRITICAL PARAMETER. 13. ILLUMINATION COLOR: RED (FORWARD), GREEN (REVERSE) 14. HARDWARE SUPPLIED: O-RING AND HEXNUT (NOT SHOWN) 15. ILLUMINATION BASE RATING: 1.8 v 20 mA FORWARD, 2.8 v 20 mA REVERSE 16. 2002/95/EC (ROHS) COMPLIANT B 21610 REVISE NOTE 15 10/14/14 AS A 21558 RELEASE FOR PRODUCTION 8/28/14 rc REV PCR NO DATE BY DESCRIPTION THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED NOTE 15 HARDWARE SUPPLIED 20.00 .50 [.787 .020 in] M16x1.0 (-) 2 (-) 1 1 (+) 2.00 [.079 in] .50 [.020 in] 8.40 [.331 in] TITLE SCALE PV6F240SS-3G1 DATE DR 8/28/2014 rc DWG 52-PV6F240SS3G1 REV B