SHEET 1 OF 1 n16.00 [.630 in] SWITCH FUNCTION PANEL CUTOUT MAX. PANEL THICKNESS 10.0mm [.315 in] POS. 1 POS. 2 OFF (ON) OPEN 1-2 (ON) = MOMENTARY n18.00 [.709 in] RING ILLUMINATION n11.90 [.469 in] n9.20 [.362 in] FLAT ACTUATOR MACHINE FINISH STAINLESS STEEL 1 - 2 L + SPDT CONTACT CONFIGURATION 1.50 [.059 in] 2.90 [.114 in] NOTE: 1. ALL DIMENSIONS IN MM [INCH] 16.50 `.50 2. GENERAL TOLERANCE: X.X=±0.4 [.650 `.020 in] X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: SILVER PLATED 5. RATING: 2A 48VDC 6. ELECTRIC LIFE: 200,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 MΩ MIN. 8. DIELECTRIC STRENGTH: 2,000 VAC MIN. FOR 1 MINUTE 9. CONTACT RESISTANCE: 50mΩ MAX. @ 1A 12VDC 10. OPERATING TEMP.: -20°C to 55°C 11. TRAVEL: 1.8mm 12. DENOTES CRITICAL PARAMETER. 13. ILLUMINATION COLOR: GREEN 14. HARDWARE SUPPLIED: O-RING AND HEXNUT (NOT SHOWN) 15. ILLUMINATION BASE RATING: 20mA 2.8V 16. 2002/95/EC (ROHS) COMPLIANT A 20702 REV PCR NO RELEASE FOR PRODUCTION DESCRIPTION BODY FINISH MACHINE FINISH STAINLESS STEEL 15.50 [.610 in] 20.00 `.50 [.787 `.020 in] M16x1.0 (-) 2 (-) 1 1 (+) 2.00 [.079 in] .50 [.020 in] 9.80 [.386 in] 8.40 [.331 in] 8/7/12 rc DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED NOTE 15 HARDWARE SUPPLIED TITLE SCALE 2:1 PV6H240SS-331 DATE 8/7/2012 DR rc DWG 52-PV6H240SS331 REV A